Magblocks

Magblock 10 Round Limiter for Kimber 2K11 26 Round 9mm Magazines

• Fits 26 round 9mm Factory Kimber 2K11 magazines made by Duramag. 
• Easy installation in the follower of the magazine
• Limits the magazine to 10 and 15 rounds of 9mm. 
• Held in place with spring tension or can be epoxied for a permanent modification. 
• Lightweight, efficient design. 

Canik TP9, Mete SFX, SFX Rival, TP9SF Elite Compact, Mete SF Compact Magblock 10/26 (9mm) 10 & 15 Round Limiter

This Magblock fits the factory Canik TP9 Full-Size and TP9SF Elite Compact 26 round 9mm magazines and will limit them to 10 rounds.  Easily installed in seconds at the base of the spring. The factory locking plate is installed under the block. It is held in place with spring tension alone or can be glued or epoxied if desired.  This block will work in both the full-size and compact TP9 series 26-round magazines.

• Simple install to make 10/26 Canik TP9, Mete SFX, SFX Rival, TP9SF Elite, Mete SF Compact magazines. 
• No modification to the magazine is required.
• Lightweight and will not interfere with magazine reliability.
• Works on original factory Canik TP9, TP9SF Elite Compact magazines as seen in the photos. 

*Please click on photos for installation instructions. 

*ATTENTION: This posting is for the Magblock (only) and not for the magazine. We don't currently sell any magazines at all.

M3 - M3A1 Grease Gun Magblock Limiter (.45 

• This block fits 30 Round M3 Grease Gun .45 magazines to limit them to 10 or 15 rounds.
• The spring can also be epoxied to the block for a permanent installation.
• A spring catch at the bottom makes installation quick and easy.

*ATTENTION: This posting is for the Magblock (only) and not for the magazine. We don't currently sell any magazines at all.

Grand Power Stribog Magblock (.45)

• This block will work with 20 round .45 Grand Power Stribog magazines to make a 10 or 15 round magazine.
• This block will replace the factory retaining plate.

*This posting is for the magblock (only) and not for the magazine. We don't currently sell any magazines at all.

Magblock Limiter MBX Extreme Defender Series 120mm - GP Forza Arms 9mm Magazines

• Fits 17 round 9mm Factory MBX Extreme Defender Series 120mm, GP Arms Forza 3.1, Patriot and Patriot Rebel 120mm magazines with LOCK-BACK FOLLOWER. 
• Easy installation into the base of the magazine.
• Limits the magazine to 10 or 15 rounds of 9MM. 
• Held in place with spring tension or can be epoxied for a permanent modification.
• Lightweight, efficient design. 
• Only fits the floor plates shown. May need sanding shorter if your magazines have a floorplate locking plate.

*ATTENTION: This posting is for the Magblock (only) and not for the magazine. We don't currently sell any magazines at all.

Springfield - Checkmate M14/M1A 5 Round Limiter For 10 Round Magazine For Hunting

- Easiest and quickest way to make a 10 round M14 - M1A magazine into a 5 round magazine for hunting.

- Can be permanently attached to the spring with epoxy.

- The block attaches to the spring to prevent noise and movement.

- No magazine modifications required.

-Allows loading on a closed bolt with 5 rounds installed.

*ATTENTION: This posting is for the Magblock (only) and not for the magazine. We don't currently sell any magazines at all.

JTS Group M12AK 2 Round Limiter for 5 Round Magazines (12ga)

• Fits JTS Group M12AK 5 round magazines and will limit them to 2 rounds
• Fits at the base of the magazine
• This allows you to use the factory locking plate
• Magblock for the JTS M12AK and M12AK-T1 5-round magazine

*ATTENTION: This posting is for the Magblock (only) and not for the magazine. We don't currently sell any magazines at all.

 Magblock 10 Round Limiter for Heckler & Koch VP9CC 9mm

- Fits 12 round 9mm H&K VP9CC magazines. 
- Limits the magazine to 10 rounds of 9mm
- Easy installation on top of the locking plate as shown in the photos.
- New, Improved design.
- Lightweight, efficient design. 

*ATTENTION: This posting is for the Magblock (only) and not for the magazine. We don't currently sell any magazines at all.

Magblock Limiter For TTI Sand Viper Checkmate 2011 126mm w/ 4mm Base s

This Magblock fits the Taran Tactical Checkmate 126mm w/ 4mm TTI extension getting it to 20 round 9mm magazines and will limit them to 10 or 15 rounds.  Easily installed in seconds at the follower (like in the photos), and It is held in place with spring tension alone or can be epoxied if desired.

• Simple install to make 10/20 TTI Checkmate 2011 126mm w/ 4mm extension magazines. 
• No modification to the magazine is required.
• Lightweight and will not interfere with magazine reliability.
• Tested on factory Taran Tactical Checkmate 126 mm w/ 4mm extension magazines as shown in the photos. Magazine is originally a 19-round magazine with the added TTI 4mm extension that gets it to 20-rounds. Block the magazine to either 10 or 15 rounds.

Magblock Limiter For TTI Sand Viper Checkmate 2011 140mm w/ 4mm Base 

This Magblock fits the Taran Tactical Checkmate 140mm w/4mm TTI extension getting it to 22 round 9mm magazines and will limit them to 10 or 15 rounds.  Easily installed in seconds at the follower (like in the photos), and It is held in place with spring tension alone or can be epoxied if desired.

• Simple install to make 10/22 TTI Checkmate 2011 140mm w/4mm extension magazines. 
• No modification to the magazine is required.
• Lightweight and will not interfere with magazine reliability.
• Tested on factory Taran Tactical Checkmate 140 mm w/ 4mm extension magazines as shown in the photos. Magazine is originally a 20-round magazine with the added TTI 4mm extension that gets it to 22-rounds. Block the magazine to either 10 or 15 rounds.

Rost Martin RM1S 9mm Magblock 10 Round Limiters

• Fits 12 round 9mm Rost Martin RM1S Magazine
• New design installs under the frollower and is held in place with spring tension.
• Limits the magazine to 10 rounds of 9mm. 
• Held in place with spring tension or can be epoxied for a permanent modification. 
• Lightweight, efficient design.

*Please click on photos at left for installation instructions. New design installs at the base of the spring and sits on top of the original locking plate.

*This posting is for the magblock (only) and not for the magazine. We don't currently sell any magazines at all.

ASC - Duramag USGI 6.8 SPC Magblock For Hunting (2 or 5 Round Limiter)

• For use in ASC - Duramag USGI 6.8 SPC 10 round magazines. 
• These blocks will convert a 10 round magazine to hold only 2 or 5 rounds for hunting.

*ATTENTION: This posting is for the Magblock (only) and not for the magazine. We don't currently sell any magazines at all.

Magblock For Genesis Arms GEN-12 Drum Magazines (12ga)

• Fits Genesis Arms GEN-12 15 round drum magazines and will limit them to 10 rounds or 5 rounds for hunting. 
• Fits into the magazine channel (See Pictures for details).
• The block can be inserted in 2 different ways to either block the drum magazine to 10 rounds or 5 rounds for hunting.
• Please see are Youtube video for install directions.

*ATTENTION: This posting is for the Magblock (only) and not for the magazine. We don't currently sell any magazines at all.

Magblock Limiter Mec-Gaer 2011, Prodigy, Tisas Duty DS 22 Round 9mm Magazines

• Fits 22 round 9mm Mecgar 2011 - Prodigy 2011 magazines. 
• Easy installation into the base of the magazine (See pictures).
• Limits the magazine to 10 or 15 rounds of 9mm. 
• Held in place with spring tension or can be epoxied for a permanent modification. 
• Lightweight, efficient design. 

*ATTENTION: This posting is for the Magblock (only) and not for the magazine. We don't currently sell any magazines at all.