Magblocks

Walther .40 P99 Magblock 10 Round Limiters

- Fits 11 round .40 Factory Walther P99 magazines as shown.
- Easy installation under the follower as shown.
- Limits the magazine to 10 rounds of .40
- Held in place with spring tension or can be epoxied for a permanent modification.
- Lightweight, efficient design.

MecGar Tanfoglio Witness Magblock Round Limiter for 17 Round Magazines Chambered in .38 Super

This Magblock fits the Mecgar Tanfoglio Stock Master 9mm, 17 round magazines and will limit them to 10 rounds.  Easily installed in seconds at the base of the magazine. It is held in place with spring tension alone or can be glued or epoxied if desired.
-Simple install to make 10 round Tanfoglio Witness Magazines.
-No modification to the magazine is required.
-Lightweight and will not interfere with magazine reliability.

"Universal Limiter Instuctions: To make this limiter from a universal cut the base flush with "13" showing in the indicator notch. Cement the base and slide together. Limiters ordered on this listing come Premade to these specifications. 

Magblock for the Duramag/C-Products 20 round AR-10 Magazines. Made of heat and impact resistant fiber reinforced polymer. Won't deform even in the most hostile environments. 

AREX Zero S1 Compact Magblock 10 Round Limiters 

- Fits 15 round 9mm Factory AREX Zero Compact S1 magazines as shown.
- Tested in AREX Zero S1 Compact 15 round magazine.
- Easy installation at the base of the spring as shown.
- Limits the magazine to 10 rounds of 9mm
- Held in place with spring tension or can be epoxied for a permanent modification.
- Lightweight, efficient design.

*ATTENTION: This posting is for the Magblock (only) and not for the magazine. We don't currently sell any magazines at all.

Promag PS-90, P-90 MAGBLOCK 10/50 MAGAZINE

- New and Improved Easy Install Design.

- This block will fit original 5.7x28mm Promag PS-90, P-90 Magazines made by Promag.

- The block replaces the factory locking plate and will convert 50 round magazines to hold only 10 rounds. 

- The block can be epoxied to the spring for a permanent modification.

*PATENT PENDING*

ASC USGI 6.8 SPC Magblock 10/25 MCL (Magazine Capacity Limiter)

- For use in ASC USGI 6.8 SPC 25 round magazines. 
- These blocks will convert a 25 round magazine to hold only 10 rounds.

Ruger American Compact 10/12 Magblock 10 Round Limiter for 12 Round Magazines

This Magblock fits the Ruger American Compact Pistol  9mm, 12 round magazines and will limit them to 10 rounds.  Easily installed in seconds at the base of the magazine. It is held in place with spring tension alone or can be glued or epoxied if desired.
-Simple install to make 10 round Ruger American Pistol Magazines.
-No modification to the magazine is required.
-Lightweight and will not interfere with magazine reliability.

Universal Limiter Instuctions: To make this limiter from a universal cut the base flush with "3" showing in the indicator notch. Cement the base and slide together. Limiters ordered on this listing come Premade to these specifications. 

Beretta 80X Magblock 10/13 (.380) 10 Round Limiter

This Magblock fits the factory Beretta 80X 13 round .380 magazines and will limit them to 10 rounds.  Easily installed in seconds at the base of the spring. The factory locking plate is installed under the block. It is held in place with spring tension alone or can be glued or epoxied if desired.

- Simple install to make 10/13 Beretta 80X magazines.
- No modification to the magazine is required.
- Lightweight and will not interfere with magazine reliability.
- Works on original factory Beretta 80X magazines as shown in the photos. Other types of magazines may require modification of the limiter. 
*Please click on photos for installation instructions. 

*ATTENTION: This posting is for the Magblock (only) and not for the magazine. We don't currently sell any magazines at all.

ITAC Defense 10 Round Limiter Magblock 10/30

- For use in Itac Defense type 30 round magazines for the AR15. 
- These blocks will convert a 30 round magazine to hold only 10 rounds. 

AREX Rex Delta L Magblock 10 Round Limiters 

- Fits 19 round 9mm Factory AREX Rex Delta L magazines as shown.
- Tested in AREX Rex Delta 19 round magazine.
- Easy installation at the base of the spring as shown.
- Limits the magazine to 10 rounds of 9mm
- Held in place with spring tension or can be epoxied for a permanent modification.
- Lightweight, efficient design.

*ATTENTION: This posting is for the Magblock (only) and not for the magazine. We don't currently sell any magazines at all.

Magblock 10 Round Limiter for Atlas Gunworks Slidelock 120mm 16 Round 9mm Magazines

- Fits 16 round 9mm Factory Atlas Gunworks 120 mm magazines. 
- Easy installation into the follower of the magazine.
- Limits the magazine to 10 rounds of 9mm. 
- Held in place with spring tension or can be epoxied for a permanent modification. 
- Lightweight, efficient design. 
- Only fits the Slidelock (lock-back) follower style magazines. See pictures below of a Slidelock follower.

*ATTENTION: This posting is for the Magblock (only) and not for the magazine. We don't currently sell any magazines at all.

Magblock 10 Round Limiter for Shadow Systems DR920 and XR920 Pmag 17 GL9 Magazines.

- Fits 17 round Magpul Pmag GL9 magazines for Shadow Systems DR920 and XR920
- Easy installation at the base of the magazine and sits on top of the locking plate.
- Limits the magazine to 10 rounds of 9mm. 
- Held in place with spring tension or can be epoxied for a permanent modification. 
- Lightweight, efficient design. 

* Please click the photos for installation instructions. Fits Magpul Pmag 17 GL9 Magazines Only. 

Magblock 10 Round Limiter for Shadow Systems MR920, MR920L and MR920P Series Magazines.

- Fits 15 round Magpul Pmag GL9 magazines for Shadow Systems MR920, MR920L and MR920P.

- Easy installation at the base of the magazine and sits on top of the locking plate.
- Limits the magazine to 10 rounds of 9mm. 
- Held in place with spring tension or can be epoxied for a permanent modification. 
- Lightweight, efficient design. 

* Please click the photos for installation instructions. Fits Magpul Pmag 15 GL9 Magazines Only. 

Universal Limiter Instructions: To make this limiter using the universal pistol limiter, cut the base flush with #8 showing in the indicator notch. Then cement base and slide in place. The bottom lock is not used. 

Magblock for Chinese Norinco AK47 (7.62x39mm) Magazines.

- This block fits the Norinco 30 round AK47 magazines in 7.62x39mm and will convert them to a 10 round magazine.

- Replaces the lower locking plate for an easy and secure install.

Want to upgrade to the best stainless steel AK replacement springs available? See our upgrade springs here: LINK