Beretta APX Magblock 10/17 (9mm) 10 Round Limiter

This Magblock fits the factory Beretta APX 21 round 9mm magazines and will limit them to 10 rounds.  Easily installed in seconds at the base of the spring. The factory locking plate is installed under the block. It is held in place with spring tension alone or can be glued or epoxied if desired.

- Simple install to make 10/21 Beretta APX magazines.
- No modification to the magazine is required.
- Lightweight and will not interfere with magazine reliability.
- Works on original factory Beretta APX magazines as seen in the photos. Other types of magazines will likely require modification of the limiter. 

*Please click on photos for installation instructions. 

*ATTENTION: This posting is for the Magblock (only) and not for the magazine. We don't currently sell any magazines at all.

ETS Smith & Wesson M&P Full Size 9mm Magblock 10 Round Limiters

- Fits 17 round 9mm ETS M&P magazines (ONLY). 
- New design installs into the follower like in the pictures.
- Limits the magazine to 10 rounds of 9mm. 
- Held in place with spring tension or can be epoxied for a permanent modification. 
- Lightweight, efficient design. - Tested with ETS S&W Magazines.

-This block is for the ETS S&W M&P 9mm 17-round magazine only.

ETS Glock 9mm Magblock 10 Round Limiter for 31 round Magazines

This Magblock fits the ETS 31 round 9mm magazines for Glocks and will limit them to 10 rounds.  Easily installed under the follower of the magazine. It is held in place with spring tension alone or can be glued or epoxied if desired for a permanent modification where required. (Epoxy sold separately). 

- Simple install to make 10/31 Glock 9mm magazines.
- No modification to the magazine is required.
- Lightweight and will not interfere with magazine reliability.
- Fits ETS magazines like the one pictured.

Ruger BX-15 Magblock 10 Round Limiters for .22WMR & .17HMR

- Fits 15 round .22WMR & .17HMR Ruger BX15 magazines.
- Easy installation.
- Limits the magazine to 10 rounds of .22WMR & .17HMR
- Held in place with spring tension or can be epoxied for a permanent modification.
- Lightweight, efficient design.

• New Design
• Converts the updated DURAMAG AR-15 7.62x39 28 round magazine to 10 rounds.
• Easy installation 
• Does not affect reliability 

This block will work in the Sig Sauer 7.62x39 MCX SPEER 28-round magaziens.

• Converts the DURAMAG AR-15 6.5 Grendel 26 round magazine to 10 rounds.
• Easy installation 
• Does not affect reliability 
• This block is constucted from our "New" Universal AK magazineblocks. 

Magblock 5 Round Limiter for Magpul 30 Round AK-47 Pmag (7.62x39mm)

This block fits the new Magpul 30 round AK47 magazines and will convert them to hold 5 rounds for Hunting.

- Replaces the lower locking plate for an easy and secure install.
- Built in spring catch holds the limiter securely in place and prevents noise.
- Patented design not available anywhere else. 

*Made using out new Universal AK Limiter. If using the universal AK kit to make this limiter, cut so #39 shows in the indicator notch and use the Pmag lock insert. Along with an adapter. 

H&K Magblock 10/20 Limiter

- For use in H&K MR556 and HK416 type 20 round magazines as pictured.

- These blocks will convert a 20 round magazine to hold only 10 rounds.

- The locking plate is not used with the limiter installed.

Taurus G2C Magblock 10/17 (9mm) 10 Round Limiter

-This Magblock fits the factory Taurus G2C 17 round 9mm magazines and will limit them to 10 rounds.

-Easily installed in seconds at the base of the magazine. It is held in place with spring tension alone or can be glued or epoxied if desired or required.

-This provides an easy method to convert your factory Taurus G2C magazines to 10 rounds. No external modification to the magazine is required

Has been tested on original factory magazines.

Amend2 6.5 Grendel Magblock 5/10 Limiter

- For use in Amend2 6.5 Grendel 10 round magazines as pictured.

- These blocks will convert a 10 round magazine to hold only 5 rounds.

AREX Rex Delta Magblock 10 Round Limiters

- Fits 15 round 9mm Factory AREX Rex Delta magazines as shown.
- Tested in AREX Rex Delta 15 round magazine.
- Easy installation at the base of the spring as shown.
- Limits the magazine to 10 rounds of 9mm
- Held in place with spring tension or can be epoxied for a permanent modification.
- Lightweight, efficient design.

*ATTENTION: This posting is for the Magblock (only) and not for the magazine. We don't currently sell any magazines at all.

 Magblock 10 Round Limiter for ETS Heckler & Koch VP9 9mm

- Fits 17 round 9mm ETS (Elite Tactical Systems) H&K VP9 magazines. 
- Limits the magazine to 10 rounds of 9 mm
- Easy installation into the follower as shown in the photos.
- New, Improved design.
- Lightweight, efficient design. 

 *This block is designed for the ETS HK VP9/P30 17-round magazine only. It has not been tested on factory HK VP9 magazines.

Taurus G3, GX2, GX4 Carry Magblock 10/15 (9mm) 10 Round Limiter

This Magblock fits the factory Taurus G3 and GX4 Carry, GX2 15 round 9mm magazines and will limit them to 10 rounds. Easily installed in seconds at the base of the magazine. It is held in place with spring tension alone or can be glued or epoxied if desired or required. This provides an easy method to convert your factory Taurus G3 magazines to 10 rounds. No external modification to the magazine is required

Has been tested on original factory magazines.

Magblock 10 Round Limiter for CZ-75 SP-01 18 Round Magazines

- Fits 18 round 9mm CZ-75 SP-01 magazines.
- Easy installation at the base of the spring.
- Limits the magazine to 10 rounds of 9mm. 
- Held in place with spring tension or can be epoxied for a permanent modification. 
- Lightweight, efficient design. 
- Made of a super strong, heat resistant, fiber reinforced polymer.

*If using our Universal Limiter for this magazine: Cut to #21 and glue flush at the bottom for 10/18 limiter. Slide lock is not used. When epoxy cures assemble magazine. #21 will show in the limiter window notch like in the photos.