Magblocks

Glock 9mm Magblock for 24 Round (9mm) Magazines

- Fits 24 round 9mm Foctory Glock 17 magazines 
- Easy installation under the magazine follower.
- Limits the magazine to 10 rounds of 9mm. 
- Held in place with spring tension or can be epoxied for a permanent modification. 
- Lightweight, efficient design. 

* Please click the photos for installation instructions. Fits newer generation full metal lined Glock Magazines.
Only compatable with the follower type and magazine base extension shown in the pictures along with the newer black followers. If yours is different then modifications may be needed.

Magblock 10 Round Limiter for Canik TP9, TP9SA, TP9SF, TP9SFX, Mete SFT 20 Round Magazines

- Fits 20 round 9mm Factory Canik TP9, TP9SF, TP9SA, TP9SFx magazines. 
- Easy installation at the base of the spring.
- Limits the magazine to 10 rounds of 9mm. 
- Held in place with spring tension or can be epoxied for a permanent modification. 
- Lightweight, efficient design. 
- Made of a super strong, heat resistant, fiber reinforced polymer.

-Tested on factory Canik TP9 magazines.The block may need to be modified to work with magazines from other manufactures.

.* Universal limiter can be cut to #23 showing in the notch to make this limiter. 

Magblock 10 Round Limiter for CZ-75B 15 Round Magazines

- Fits 15 round 9mm CZ75B factory magazines
- Easy installation at the base of the spring.
- Limits the magazine to 10 rounds of 9mm. 
- Held in place with spring tension or can be epoxied for a permanent modification. 
- Lightweight, efficient design. 

*If using our Universal Limiter for this magazine: Cut to #10 and glue flush at the bottom for 10/15 limiter. Slide lock is not used. When epoxy cures assemble magazine. #10 will show in the limiter window notch like in the photos.  

Arsenal Circle 10 AK-74 Magblock for 5.56x45mm 30 round magazines

• This AK-74 block fits most 30 round polymer 5.56x45 mm magazines and will convert them to hold only 10 rounds.
• The new design features a spring catch which will allow an easy attachment point to the spring.
• This prevents the block making noise and epoxy can be added at this point to make it permanent.
• This block will replace the original magazine locking plate.

-This magazineblock is made using our "New" Universal AK kits cut to #36. 

-Attention: This block won't work in the Arsenal Circle 10 30-round magazine chambered in 5.45x39. We do offer a block for that magazine.

 Wilson Combat EDC X9, SFX9, SFT9, Experior Magblock 10 Round Limiters

- Fits 15 round 9mm Factory Wilson Combact EDC X9 magazines as shown.
- Easy installation at the base of the spring as shown.
- Limits the magazine to 10 rounds of 9mm
- Held in place with spring tension or can be epoxied for a permanent modification.
- Lightweight, efficient design.

*ATTENTION: This posting is for the Magblock (only) and not for the magazine. We don't currently sell any magazines at all.

Magblock 10 Round Limiter for Sig P226 19 Round Mec-Gar Magazines

This Magblock fits the Sig P226 X-Five Mec-Gar 19 round magazines (With aluminum addition as shown) made by Mec-Gar and will limit them to 10 rounds.

- Easy installation at the base of the spring.

- Limits the magazine to 10 rounds of 9mm.

- Held in place with spring tension or can be epoxied for a permanent modification.

- Lightweight, efficient design.

- Made of a super strong, heat resistant, fiber reinforced polymer.

Block used is a Universal Pistol Limiter cut to #21.

Magblock 10 Round Limiter for CZ Scorpion Evo PGS Hybrid (9mm) 32 Round Magazines

- Fits 32 round 9mm CZ Scorpion Evo PGS Hybrid magazines
- Easy installation at the base of the spring.
- Limits the magazine to 10 rounds of 9mm. 
- Held in place with spring tension or can be epoxied for a permanent modification. 
- Lightweight, efficient design. 
- Made of a super strong, heat resistant, fiber reinforced polymer.

 *ATTENTION: This posting is for the Magblock (only) and not for the magazine. We don't currently sell any magazines at all.

Magblock 10 Round Limiter for CZ Scorpion Evo 3+ (9mm) 20 Round Magazines

- Fits 20 round 9mm CZ Scorpion Evo Window and Blackedout version 3+ magazines
- Easy installation at the base of the spring.
- Limits the magazine to 10 rounds of 9mm. 
- Held in place with spring tension or can be epoxied for a permanent modification. 
- Lightweight, efficient design. 
- Made of a super strong, heat resistant, fiber reinforced polymer.

* This block is designed for the CZ factory Window and 3 Plus Blackout 20 Round magazines only. It will not work in the CZ Smoke Gray magazines. Look at the picture below to determine which magazine you have. We carry blocks for both styles of magazines. 

CZ Evo Factory Smoke Gray 10/20 Magblock: https://www.magazineblocks.com/magento/cz-scorpion-magblock-10-20-9mm.html

Kel-Tec P17 (.22) 10/16 Magblock 10 or 15 Round Limiter

- This block will convert 16 round Kel-Tec P17 (.22) magazines into a 10 or 15 round magazine.

- Easy to install without damage to your magazines.

*This posting is for the magblock (only) and not for the magazine. We don't currently sell any magazines at all.

Magblock 10 Round Limiter for Canik TP9SF Elite and METE MC9 Compact 15 Round Magazines

- Fits 15 round 9mm Factory Canik TP9 Compact magazines. 
- Easy installation at the base of the spring.
- Limits the magazine to 10 rounds of 9mm. 
- Held in place with spring tension or can be epoxied for a permanent modification. 
- Lightweight, efficient design. 
- Made of a super strong, heat resistant, fiber reinforced polymer.

-Tested on factory Canik TP9 Compact magazines.The block may need to be modified to work with magazines from other manufactures.

.* Universal limiter can be cut to #10 showing in the notch to make this limiter. 

Magblock for Bakelite AK47 (7.62x39mm) Magazines.

- This block fits the Bakelite 30 round AK47 magazines in 7.62x39mm and will convert them to a 10 round magazine.

- Replaces the lower locking plate for an easy and secure install.

Want to upgrade to the best stainless steel AK replacement springs available? See our upgrade springs here: LINK

*ATTENTION: This posting is for the Magblock (only) and not for the magazine. We don't currently sell any magazines at all.

AK-74 Bakelite Magblock for 5.45x39mm 45 round magazines

• This AK-74 block fits 45 round 5.45x39 mm magazines and will convert them to hold only 10 rounds.
• This block will replace the original magazine locking plate.

Tested on the following AK74 Bakelite 45 round magazine.

*ATTENTION: This posting is for the Magblock (only) and not for the magazine. We don't currently sell any magazines at all.

Walther UZI (.22LR) Magblock 10 Round Limiter 

- Fits 20 round Walther UZI .22 magazines. 
- Easy installation by replacing the locking plate. See photos.
- Limits the magazine to 10 rounds of .22 
- Held in place with spring tension or can be epoxied for a permanent modification. 
- Lightweight, efficient design. 

*This listing is for the magblock only. We don't currently sell any magazines at all. THESE MAGAZINES HAVE BEEN DISCONTINUED BY WALTHER AND ARE NO LONGER OFFERED BY THEM.

Amend2 Magblock for Glock 17 (9mm) Magblock

- Fits 18 round 9mm Amend2 Glock 17 magazines.  
- Easy installation at the base of the magazine.
- Limits the magazine to 10 rounds of 9mm. 
- Held in place with spring tension or can be epoxied for a permanent modification. 
- Lightweight, efficient design. 

 - This block is designed for the Amend2 Glock 17 magazine only, and will not work properly in factory Glock 17 magazines.