Magblock 10 Round Limiter for STI Staccato - Checkmate 170mm 20 Round 9mm Magazines

- Fits 26 round 9mm Factory Staccato - Checkmate 170 mm magazines. 
- Easy installation at the base of the spring.
- Limits the magazine to 10 rounds of 9mm. 
- Held in place with spring tension or can be epoxied for a permanent modification. 
- Lightweight, efficient design. 
- Only fits the floor plates shown. May need sanding shorter if your magazines have a floorplate locking plate.

*Note: If you have a newer Staccato STI magazine that has G3 on the back of the magazine, then you will need to click G3 option below. If you're running the Checkmate 170mm magazines, then choose the G3 options.

Taurus PT92 and PT99 Magblock 10/15 (9mm) 10 Round Limiter

This Magblock fits the factory Taurus PT92 and PT99 15 round 9mm magazines and will limit them to 10 rounds. Easily installed in seconds at the base of the magazine. Save time and money converting your magazines to 10 rounds. It is held in place with spring tension alone or can be glued or epoxied if a permanent modification is needed to be legal.

- Simple install to make 10/15 Taurus PT92 and PT99 magazines.
- No modification to the magazine is required.
- Lightweight and will not interfere with magazine reliability.
- Works on original factory Taurus PT92/PT99 magazines as shown in the photos. Magazines marked "Made in Brazil" with metal followers. Other types of magazines will require modification of the limiter or a different size.

Please click on photos for installation instructions.

FYI: This limiter can also be made using our Universal limiter kit. Cut the Universal Pistol limiter flush at the base with the #9 showing in the indicator notch then set in place using glue. * The right rear part at the base of the limiter may need to be sanded down if it interferes with the magazine relaease hole. (See photos)

Hudson H9 9mm Magblock 10 Round Limiters

- Fits 15 round 9mm Factory  Hudson H9 9mm magazines.
- Easy installation at the base of the magazine. 
- Limits the magazine to 10 rounds of 9mm
- Held in place with spring tension or can be epoxied for a permanent modification.
- Lightweight, efficient design.

Note: This limiter can also be made using our Universal Pistol Limiter and cutting flush at the base with #12 showing in the indicaor notch. 
The limiters shown here come pre-cut and glued for a drop in conversion. 

 Magblock 10 and 15 Round Limiter for Heckler & Koch P30 and VP9 9mm

- Fits 20 round 9mm H&K P30 and VP9 magazines. 
- Limits the magazine to 10 rounds of 9 mm
- Easy installation on top of the locking plate as shown in the photos.
- New, Improved design.
- Lightweight, efficient design. 

FYI: This block is made from our Universal Pistol Limiter and is cut so that the number "22" shows up in the indicator notch. The lock tab is not used and the slide is cut so that it is flush with the base of the limiter. The 2 pieces are then bonded together. See photos for details. 

-This block is for factory HK 20 round VP9/P30 magazines, and will not work on magazines with HK +5 extensions.

Magblock 10 Round Limiter for CZ P-10 Compact - P-09 Nocturne Compact 17 Round Magazines

- Fits 17 round 9mm CZ P-10 Compact factory magazines
- Easy installation at the base of the spring.
- Limits the magazine to 10 rounds of 9mm. 
- Held in place with spring tension or can be epoxied for a permanent modification. 
- Lightweight, efficient design. 

*If using our Universal Limiter for this magazine: Cut to #17 and glue flush at the bottom for 10/17 limiter. Slide lock is not used. When epoxy cures assemble magazine. #17 will show in the limiter window notch like in the photos.  

Walther PPQ M2 Magblock 10 Round Limiters

- Fits 17 round 9mm Factory Walther PPQ M2 magazines as shown.
- Tested in M2 version PPQ Magazines.
- Easy installation at the base of the spring as shown.
- Limits the magazine to 10 rounds of 9mm
- Held in place with spring tension or can be epoxied for a permanent modification.
- Lightweight, efficient design.

Universal Limiter Instructions:  To make this limiter out of the Universal  just cut flush at the base with number 18 shown in the indicator notch. Cement together after testing fit. 

Magblock 15/30 MCL (Magazine Capacity Limiter) for Magpul 30 round Pmags in 300 Blackout only.

- This block will replace the lower spring attachment point  or locking plate and convert a 30 round magazine to hold only 15 rounds.

- The Pmag dust covers will still fit when loaded.

- Magazines can be loaded with the bolt closed.- Does not affect reliability.

- No increase in spring pressure. 

FNS-9 Magblock 10 Round Limiter

- Fits 16 round 9 mm Factory FNP-9 magazines. 
- Easy installation at the base of the magazine.
- Limits the magazine to 10 rounds of 9 mm. 
- Held in place with spring tension or can be epoxied for a permanent modification. 
- Lightweight, efficient design. 

FN 509 Magblock 10 and 15 Round Limiters

- Fits 17 round 9 mm Factory FN 509 magazines. 
- Easy installation at the base of the magazine.
- Limits the magazine to 10 or 15* rounds of 9 mm.
    *Must select below for 15 round or will be shipped as a 10 round limiter
- Held in place with spring tension or can be epoxied for a permanent modification. 
- Lightweight, efficient design. 

-This block will also work in the FN 509 Compact and Edge 17-round magazine too.

ETS Glock 9mm Magblock 10 Round Limiter for 17 round Magazines

This Magblock fits the ETS 17 round 9mm magazines for Glocks and will limit them to 10 rounds.  Easily installed in seconds at the base of the magazine. It is held in place with spring tension alone or can be glued or epoxied if desired for a permanent modification where required. (Epoxy sold separately). 

- Simple install to make 10/17 Glock 9mm magazines.
- No modification to the magazine is required.
- Lightweight and will not interfere with magazine reliability.
- Fits ETS magazines like the one pictured.

-This block is designed for the ETS Glock 17-round 9mm magazines only.

ETS Glock 9mm Magblock 10 Round Limiter for 15 round Magazines

This Magblock fits the ETS 15 round 9mm magazines for Glocks and will limit them to 10 rounds.  Easily installed in seconds at the base of the magazine. It is held in place with spring tension alone or can be glued or epoxied if desired for a permanent modification where required. (Epoxy sold separately). 

- Simple install to make 10/15 Glock 9mm magazines.
- No modification to the magazine is required.
- Lightweight and will not interfere with magazine reliability.
- Fits ETS magazines like the one pictured.

ATTENTION: This block is designed for the ETS Glock19 15 round magazine only.

Beretta 92 Magblock 10/20 (9mm) 10 Round Limiter for ProMag 20 Round Magazines.

This Magblock fits the ProMag Beretta 92 (20 round) 9mm magazines and will limit them to 10 rounds.  Easily installed in seconds at the base of the spring. The factory locking plate is not used. It is held in place with spring tension alone or can be glued or epoxied if desired.

- Simple install to make 10/20 Beretta 92 magazines.
- No modification to the magazine is required.
- Lightweight and will not interfere with magazine reliability.
- Works on Promag Beretta 92 magazines as seen in the photos. Other types of magazines will likely require modification of the limiter. 

*Please click on photos for installation instructions. 

*ATTENTION: This posting is for the Magblock (only) and not for the magazine. We don't currently sell any magazines at all.

Beretta PX4 Compact Magblock 10/12 (.40) 10 Round Limiter

This Magblock fits the factory Compact Beretta PX4 12 round .40 caliber magazines and will limit them to 10 rounds. Installs at the base of the spring. A notch allows room for the metal tab on the locking plate. It is held in place with spring tension alone or can be glued or epoxied if desired. 

- Save time and your expensive factory magazines. Quick install to make 10/12 Beretta Compact PX4 magazines.
- No modification to the magazine is required.
- Lightweight and will not interfere with magazine reliability.
- Works on original factory 12 round Beretta PX4 magazines as seen in the photos. 

*ATTENTION: This posting is for the Magblock (only) and not for the magazine. We don't currently sell any magazines at all.

Beretta PX4 Full Size Magblock 10/14 (.40) 10 Round Limiter

This Magblock fits the factory Full Size Beretta PX4 14 round .40 caliber magazines and will limit them to 10 rounds. Installs at the base of the spring. A notch allows room for the metal tab on the locking plate. It is held in place with spring tension alone or can be glued or epoxied if desired. (Compact magazines use a different limiter)

- Save time and your expensive factory magazines. Quick install to make 10/14 Beretta Full Size PX4 magazines.
- No modification to the magazine is required.
- Lightweight and will not interfere with magazine reliability.
- Works on original factory 14 round Beretta PX4 magazines as seen in the photos. 

*Universal Instructions: Cut Universal limiter to #11.5 in the indicator notch. A cutout in the limiter base is needed or the slide lock can be used. See photos for details.