Magblocks

Okay Industries Surefeed E2 Magblock 10/30 USGI MCL (Magazine Capacity Limiter) for AR15/M16 Magazines

- For use in Surefeed E2 USGI type 30 round magazines for the AR15/M16. 
- These blocks will convert a 30 round magazine to hold only 10 rounds.

This block will work with 32 round 9mm ProMag Cobray M-11 magazines to make a 10 round magazine.  The spring can also be epoxied to the block which allows for dis-assembly and cleaning, or epoxy the floor plate closed for a more secure modification.

Block installs at the base and allows you to use the factory locking plate. 

This block will work with 32 round 9mm Cobray M-11 magazines to make a 10 round magazine.  The spring can also be epoxied to the block which allows for dis-assembly and cleaning, or epoxy the floor plate closed for a more secure modification.

Block installs at the base. 

Smith & Wesson 4006, 4046, 4043 Magblock 10 Round Limiters

- Fits 11 round .40 4006, 4046, 4043 magazines. 
- New design installs at the base of the spring.
- Limits the magazine to 10 rounds of .40. 
- Held in place with spring tension or can be epoxied for a permanent modification. 
- Lightweight, efficient design. - Tested with factory S&W 4006 magazine.

 *ATTENTION: This posting is for the Magblock (only) and not for the magazine. We don't currently sell any magazines at all.

Magblock Universal Pistol Limiter 3 Pack Kit
Allows for an easy custom solution for most standard pistol magazines. Requires cutting of the Magblock for a custom fit. As shipped it will limit most magazines to much less than 10 rounds.

Save time and money by making your magazines legal. 

NOTE: These are recommended for gunsmiths and hobbyists who don't mind experimenting with the length to get the fit they want. We do offer these as an option for some magazines already precut.  Now you have an option if we do not have a limiter available for your specific magazine with the recent law changes. If they don't work out for you just send them back for a refund or exchange.

- This Magblock fits most Compact and Full-size magazines from .380, 9mm, .40, 10mm and .45 magazines. (custom work needed to work in sub-compact magazines.

- Comes with one universal base, an adjustable slide, and a bottom lock plate which is optional to use. Highly recommend using optional Magblock Cement below.

- Easily installs at the base of the spring. It is held in place with spring tension alone or can be epoxied if desired.

- Patented adjustment mechanism and end profile that prevents the limiter from sliding off the follower.

- No modification to the magazine is required.

- Lightweight and will not interfere with magazine reliability.

- Requires cutting of the Magblock for a custom fit. As shipped it will limit most magazines to much less than 10 rounds. 

Refrence page. Lengths for tested magazines: http://www.magazineblocks.com/universal

Smith & Wesson SD40 VE .40 Magblock 10 Round Limiters

- Fits 15 round .40 SD40VE, SD40G, SD40E, SD40P, SD40V and SIGMA magazines. 
- New design installs at the base of the spring.
- Limits the magazine to 10 rounds of .40 cal. 
- Held in place with spring tension or can be epoxied for a permanent modification. 
- Lightweight, efficient design. - Tested with factory S&W 15 Round Magazines. 
- Save time and money, easier than pinning a magazine. Easily Block Magazines. 

*Universal Pistol Limiter Instructions: Cut to #12 and glue flush at the bottom for 10/14 limiter. Slide lock is not used. When epoxy cures assemble magazine. The two parts of the universal limiter must be glued flush to prevent the locking plate from causing the limiter to shift sideways. #12 will show in the limiter window notch like in the photos.  (Block purchased here already has this done).

 Magblock 10 Round Limiter for Heckler & Koch USP 9mm Tactical

- Fits 31 round 9mm H&K USP9 Tactical magazines. 
- Limits the magazinbe to 10 rounds of 9 mm
- Easy installation on top of the locking plate as shown in the photos.
- New, Improved design.
- Lightweight, efficient design. 

Arsenal Circle 10 AK-74 Magblock for 5.56x45mm 30 round magazines

• This AK-74 block fits most 30 round polymer 5.56x45 mm magazines and will convert them to hold only 10 rounds.
• The new design features a spring catch which will allow an easy attachment point to the spring.
• This prevents the block making noise and epoxy can be added at this point to make it permanent.
• This block will replace the original magazine locking plate.

-This magazineblock is made using our "New" Universal AK kits cut to #36. 

-Attention: This block won't work in the Arsenal Circle 10 30-round magazine chambered in 5.45x39. We do offer a block for that magazine.

Fits Springfield M14/M1A 7.62x51mm/.308 15 round magazines.

- Easiest and quickest way to make a 10 round M14 Magazine.

- Can be permanently attached to the spring with epoxy.

- The block attaches to the spring to prevent noise and movement.

- No magazine modifications required.

-Allows loading on a closed bolt with 10 rounds installed.

Beretta 96FS MecGar Magblock 10/13 (.40) 10 Round Limiter

This Magblock fits the MecGar Beretta 96FS 13 round magazines and will limit them to 10 rounds. Easily installed in seconds at the base of the spring. The factory locking plate is installed under the block. It is held in place with spring tension alone or can be glued or epoxied if desired.

- Simple install to make 10/13 Beretta 96FS magazines.
- Save time and money and keep your magazines legal. 
- Lightweight and will not interfere with magazine reliability.
- Works on original factory "Made in Italy" MecGar 96 magazines as seen in the photos.

*ATTENTION: This posting is for the Magblock (only) and not for the magazine. We don't currently sell any magazines at all.

Beretta 81 Magblock 10/12 (.32) 10 Round Limiter

This Magblock fits the factory Beretta 81, 81B, 81BB 12 round .32 magazines and will limit them to 10 rounds.  Easily installed in seconds at the base of the spring. The factory locking plate is installed under the block. It is held in place with spring tension alone or can be glued or epoxied if desired.

- Simple install to make 10/12 Beretta 81 magazines.
- No modification to the magazine is required.
- Lightweight and will not interfere with magazine reliability.
- Works on original factory Beretta 81 magazines as shown in the photos. Other types of magazines may require modification of the limiter. 
*Please click on photos for installation instructions. 

*ATTENTION: This posting is for the Magblock (only) and not for the magazine. We don't currently sell any magazines at all.

Great for the range bag and to show your magazines are blocked. 

Also for patch collectors like myself :)

- 3” Round PVC 

- Hook and loop backing 

 Magblock 10 Round Limiter for Heckler & Koch USP9 Compact & P2000 Full-size Magazine

- Fits 13 round 9mm H&K USP, P2000 full-size magazines. 
- Limits the magazinbe to 10 rounds of 9 mm
- Easy installation on top of the locking plate as shown in the photos.
- New, Improved design.
- Lightweight, efficient design. 

FYI: This block is made from our Universal Pistol Limiter and is cut so that the number "5" shows up in the indicator notch. The lock tab is not used and the slide is cut so that it is flush with the base of the limiter. The 2 pieces are then bonded together. See photos for details. 

Magblock 5 Round Limiter for CZ Scorpion Evo (9mm) 20 Round Magazines

- Fits 20 round 9mm CZ Scorpion Evo magazines
- Easy installation at the base of the spring.
- Limits the magazine to 5 rounds of 9mm. 
- Held in place with spring tension or can be epoxied for a permanent modification. 
- Lightweight, efficient design. 
- Made of a super strong, heat resistant, fiber reinforced polymer.