Magblocks

Lancer L7 5/20 Limiter for 20 round magazines in .308/7.62x51mm.

- This block will replace the lower spring attachment point  or locking plate and convert a 20 round magazine to hold only 5 rounds for hunting.
- Only fits L7 Advanced Warfighter with slide on base as shown.
- Does not affect reliability.
- No increase in spring pressure or wear. 
Note: This is a custom modified Pmag block and will replace the original base. 

ProMag 1911  .45 Magblock

• Fits 15 round ProMag 1911 .45 magazines. 
• Easy installation under the magazine follower.
• Limits the magazine to 10 rounds of .45
• Held in place with spring tension or can be epoxied for a permanent modification. 
• Lightweight, efficient design. 

ASC USGI 6.5 Grendel, 6mm ARCMagblock 10/25 MCL (Magazine Capacity Limiter)

- For use in ASC USGI 6.5 Grendel & 6mm ARC 25 round magazines. 
- These blocks will convert a 25 round magazine to hold only 10 rounds.

Magblock 10/30 limiter for KCI 5.56x45/.223 mm AR Magazines only.

- Tested and designed for KCI AR-15 magazines.
- These blocks will convert a 30 round 5.56x45 mm magazine to hold only 10 rounds.

Promag Colt 2000 Magblock 10 Round Limiter

This Magblock fits the Promag Colt 2000 15 round magazines and will limit them to 10 rounds of 9mm  Easily installed in seconds at the base of the magazine. It is held in place with spring tension alone or can be glued or epoxied if desired.

-Simple install to make 10 round Promag Colt 2000 Magazines.

-No external modification to the magazine is required.

-Lightweight and will not interfere with magazine reliability.

Universal Limiter Instructions: If using the Universal limiter to make this cut to #9 in the indicator notch and cement the base. Next the sides of the base will need to be sanded down to fit into the bottom of the magazine. The block sold here is pre cut and sanded. 

Magblock 10 Round Limiter for Sig P227 (.45) 14 Round Magazines

- Fits 14 round .45 Sig P227 magazines.  (13+2 extension)
- Easy installation at the base of the spring.
- Limits the magazine to 10 rounds of .45
- Held in place with spring tension or can be epoxied for a permanent modification. 
- Lightweight, efficient design. 

Magblock 10 Round Limiter for Tisas Zigana 15 Round Magazines

- Fits 15 round 9mm Tisas Zigana & PX-9 Carry factory magazines
- Easy installation at the base of the spring.
- Limits the magazine to 10 rounds of 9mm. 
- Held in place with spring tension or can be epoxied for a permanent modification. 
- Lightweight, efficient design. 

*If using our Universal Limiter for this magazine: Cut to #15 and glue flush at the bottom for 10/15 limiter. Slide lock is not used. When epoxy cures assemble magazine. #15 with the top part of #15 will show in the limiter window notch like in the photos.  

Arsenal Strike One Magblock 10 & 15 Round Limiters for 17 Round Magazine

- Fits 17 round 9mm Arsenal Strike One magazines as shown.
- Tested in Arsenal Strike One 17 round magazine.
- Easy installation at the base of the spring as shown.
- Limits the magazine to 10 rounds of 9mm
- Held in place with spring tension or can be epoxied for a permanent modification.
- Lightweight, efficient design.

*ATTENTION: This posting is for the Magblock (only) and not for the magazine. We don't currently sell any magazines at all.

Mini 14 Magblock 5/30 MCL (Magazine Capacity Limiter for Ruger Magazines for Hunting

 This block is for use in RUGER 30 round Mini 14 magazines. These blocks will attach to the lower spring and convert a 30 round magazine to hold only 5 rounds for hunting. 

- Only for use in RUGER manufactured magazines. 

- This is a modified USGI magblock.

Magblock for Zastava Polymer AK47 (7.62x39mm) Magazines.

- This block fits the Zastava 30 round AK47 magazines in 7.62x39mm and will convert them to a 10 round magazine.

- Replaces the lower locking plate for an easy and secure install.

Want to upgrade to the best stainless steel AK replacement springs available? See our upgrade springs here: LINK

Magblock 10/50 MCL (Magazine Capacity Limiter) for X-Products X-15 HXP 50 round Drum in .223/5.56mm.

- Magazines can be loaded with the bolt closed.
- Does not affect reliability
- No increase in spring pressure
- Easy to install, see the video. 

Magblock For Rock Island Armory/Armscor Tac Ultra A2 1911 Double Stack 16 Round 10mm/.40 Magazines

- Fits 16 round 10mm/.40 RIA A2 1911 Double Stack and Tac Ultra magazines. 
- Easy installation at the base of the magazine.
- Limits the magazine to 10 rounds of 10mm/.40. 
- Held in place with spring tension or can be epoxied for a permanent modification. 
- Lightweight, efficient design. 

IWI MecGar Jericho 941, IWI Masada Slim Magblock 10 Round Limiter

- Fits 16 or 17 round 9 mm Made in Italy MecGar IWI Jericho magazines. 
- Easy installation at the base of the magazine.
- Limits the magazine to 10 rounds of 9 mm. 
- Held in place with spring tension or can be epoxied for a permanent modification. 
- Lightweight, efficient design. 

-This block fits both 16 Round and 17 Round IWI Jericho 941 "Made in Italy" magazines. Tested on the magazine in the photos.  

IWI MASADA Magblock 10 Round Limiter

- Fits 17 round 9 mm Made in Italy IWI MASADA magazines. 
- Easy installation at the base of the magazine.
- Limits the magazine to 10 rounds of 9 mm. 
- Held in place with spring tension or can be epoxied for a permanent modification. 
- Lightweight, efficient design.