Magblocks

Magblock for SKS Archangel Promag (7.62x39mm) Magazines.

- This block fits the Promag SKS Archangel 20 round magazines in 7.62x39mm and will convert them to a 10 or 15 round magazine. Select option below. 

- Replaces the lower locking plate for an easy and secure install.

.

Walther P99 and PPQ Magblock 10 Round Limiters For 20 Round Magazine

- Fits 20 round 9mm Factory Walther P99 and PPQ magazines as shown.
- Easy installation under the follower as shown.
- Limits the magazine to 10 rounds of 9mm
- Held in place with spring tension or can be epoxied for a permanent modification.
- Lightweight, efficient design.

Walther .40 P99 Magblock 10 Round Limiters

- Fits 14 round .40 Factory Walther PPX magazines as shown.
- Easy installation under the follower as shown.
- Limits the magazine to 10 rounds of .40
- Held in place with spring tension or can be epoxied for a permanent modification.
- Lightweight, efficient design.

ETS Glock 20 (10 mm) Magblock

- Fits 15 round 10 mm ETS Glock 20 magazines.  *See details on correct follower types below. 
- Easy installation under the magazine follower.
- Limits the magazine to 10 rounds of 10mm ammunition. 
- Held in place with spring tension or can be epoxied for a permanent modification. 
- Lightweight, efficient design. 

This block will work with 20 round 9mm Grand Power Stribog magazines to make a 10 round magazine. Block allows you to use the stock locking plate.

This block will work with 30 round 9mm Grand Power Stribog magazines to make a 10 round magazine. Block allows you to use the stock locking plate.

AK-74 Bulgarian - Arsenal Circle 10 Magblock for 5.45x39mm 30 round magazines

• This AK-74 Bulgarian - Arsenal Circle 10 block fits most 30 round Bulgarian / Arsenal Circle 10 5.45x39 mm magazines and will convert them to hold only 10 or 15 rounds.
• The new design features a spring catch which will allow an easy attachment point to the spring.
• This prevents the block making noise and epoxy can be added at this point to make it permanent.
• This block will replace the original magazine locking plate.

Tanker AK47 10/20 Magblock

This block fits the Tanker 20 round AK47 magazines and will convert them to a 10 round magazine.

-Replaces the lower locking plate.

-Works on Korean surplus magazines.

Taurus PT24/7 Magblock 10/17 (9mm) 10 Round Limiter

This Magblock fits the factory Taurus PT24/7 17 round 9mm magazines and will limit them to 10 rounds. Easily installed in seconds at the base of the magazine. It is held in place with spring tension alone or can be glued or epoxied if desired.

- Simple install to make 10/17 Taurus PT24/7 magazines.
- No modification to the magazine is required.
- Lightweight and will not interfere with magazine reliability.
- Works on original factory Taurus PT24/7 magazines as shown in the photos. Other types of magazines may require modification of the limiter.

Please click on photos for installation instructions.

Beretta APX Magblock 10/15 (.40) 10 Round Limiter

This Magblock fits the factory Beretta APX 15 round .40 magazines and will limit them to 10 rounds.  Easily installed in seconds at the base of the spring. The factory locking plate is installed under the block. It is held in place with spring tension alone or can be glued or epoxied if desired.

- Simple install to make 10/15 Beretta APX magazines.
- No modification to the magazine is required.
- Lightweight and will not interfere with magazine reliability.
- Works on original factory Beretta APX magazines as seen in the photos. Other types of magazines will likely require modification of the limiter. 

*Please click on photos for installation instructions. 

*ATTENTION: This posting is for the Magblock (only) and not for the magazine. We don't currently sell any magazines at all.

 Wilson Combat EDC X9S, SFX9 Magblock 10 Round Limiters

- Fits 15 round 9mm Factory Wilson Combact EDC X9S, SFX9 magazines as shown.
- Easy installation at the base of the spring as shown.
- Limits the magazine to 10 rounds of 9mm
- Held in place with spring tension or can be epoxied for a permanent modification.
- Lightweight, efficient design.

*ATTENTION: This posting is for the Magblock (only) and not for the magazine. We don't currently sell any magazines at all.

Beretta ARX160 22LR 10/30 Magblock 10 Round Limiter

- This block will convert 30 round Beretta ARX160 22LR magazines into a 10 round magazine.

- Easy to install without damage to your magazines.

*ATTENTION: This posting is for the Magblock (only) and not for the magazine. We don't currently sell any magazines at all.

Universal AK47 10/30 Magblock

*** See our NEW Universal AK Limiter Here: CLICK HERE for the  IMPROVED UNIVERSAL AK KIT***

Fits most steel 30 round AK47 magazines and will convert them to hold only 10 rounds. Works best in magazines with flat locking plates like in the first photo. These tend to be Romanian, Russian, and Chinese magazines. Other plates may need to be modified to work correctly demonstrated in the second photo. This is encountered with some Bulgarian manufactured magazines. 

- Features a spring catch which will allow an easy attachment point to the spring. This prevents the block making noise and epoxy can be added at this point to make it permanent.

NOTE: These are made of additive manufacturing using high temperature ABS plastic. They're very durable and will last the life of the magazine. 

- If you are interested in identification of your AK magazines here is an excellent resource: AK47 Mag Identification

Smith & Wesson M&P .45 Magblock 10 Round Limiters

- Fits 14 round .45ACP M&P magazines. 
- New design installs at the base of the spring with the "L" shape of the spring going through the block.
- Limits the magazine to 10 rounds of .45. 
- Held in place with spring tension or can be epoxied for a permanent modification. 
- Lightweight, efficient design. - Tested with factory S&W Magazines M&P .45acp

*Please click on photos at left for installation instructions. New design installs at the base of the spring and sits on top of the original locking plate.

*Universal Pistol Limiter Instructions: Cut to #16+hole and glue flush at the bottom for 10/14 limiter. Slide lock is not used. When epoxy cures assemble magazine. The two parts of the universal limiter must be glued flush to prevent the locking plate from causing the limiter to shift sideways. #16 will show in the limiter window notch like in the photos.