Magblocks

10 Round Limiter for CAA Indicative 30 Round Polymer Magazines

Magblock 10/30 MCL (Magazine Capacity Limiter) for CAA 30 round polymer magazines in .223/5.56mm. 

- This block will attach to the bottom of the spring, and sits on top of the original locking plate.
- Easy conversion of 30 round CAA magazines to hold 10 rounds.
- Does not affect reliability.
- No increase in spring pressure. 

10 and 15 Round Limiter for IMI Defense AR15 30 Round Polymer Magazines

Magblock 10/30 and 15/30 MCL (Magazine Capacity Limiter) for IMI Defense 30 round polymer magazines in .223/5.56mm. 

- This block will attach to the bottom of the spring, and sits on top of the original locking plate.

- Easy conversion of 30 round magazine IMI magazines to hold only 10 rounds. Option to cut for 15 rounds available. Check box below.

- Does not affect reliability.

- No increase in spring pressure. 

10 Round Limiter for Tapco Galil and Golani rifle Magazines

- This block fits the Tapco 30 round .223/5.56mm magazines for Galil and Golani rifles and convert them to hold only 10 rounds.

- This block replaces the original Tapco locking plate.

- No modification to the original magazine or follower is required.

-  Fits Tapco .223/5.56 Galil/Golani magazines only. 

 Magblock 10 Round Limiter for Heckler & Koch USP 9mm Tactical

- Fits 31 round 9mm H&K USP9 Tactical magazines. 
- Limits the magazinbe to 10 rounds of 9 mm
- Easy installation on top of the locking plate as shown in the photos.
- New, Improved design.
- Lightweight, efficient design. 

 Magblock 10 Round Limiter for Heckler & Koch USP Expect 9mm

- Fits 16 round .40s&w H&K USP expert magazines. 
- Limits the magazinbe to 10 rounds of .40
- Easy installation on top of the locking plate as shown in the photos.
- New, Improved design.
- Lightweight, efficient design. 

FYI: This block is made from our Universal Pistol Limiter and is cut so that the number "12" shows up in the indicator notch. The lock tab is not used and the slide is cut so that it is flush with the base of the limiter. The 2 pieces are then bonded together. See photos for details. 

Magblock 10 Round Limiter for CZ-75, CZ-75B, CZ-75D, CZ-85 16 Round Magazines

- Fits 16 round 9mm CZ-75, CZ-85, CZ-75B, and CZ-75D factory magazines
- Easy installation at the base of the spring.
- Limits the magazine to 10 rounds of 9mm. 
- Held in place with spring tension or can be epoxied for a permanent modification. 
- Lightweight, efficient design. 

*If using our Universal Limiter for this magazine: Cut to #11.5 and glue flush at the bottom for 10/16 limiter. Slide lock is not used. When epoxy cures assemble magazine. #11.5 with the top part of #11.5 will show in the limiter window notch like in the photos.  

Arsenal Circle 10 AK-74 Magblock for 5.45x39mm 45 round magazines

• This AK-74 block and adapter fits most 45 round polymer 5.45x39 mm magazines and will convert them to hold only 10 rounds.
• The new design features a spring catch which will allow an easy attachment point to the spring.
• This prevents the block making noise and epoxy can be added at this point to make it permanent.
• This block will replace the original magazine locking plate.

ETS Smith & Wesson M&P Full Size 9mm Magblock 10 Round Limiters

- Fits 21 round 9mm ETS M&P magazines. 
- New design installs into the follower like in the pictures.
- Limits the magazine to 10 rounds of 9mm. 
- Held in place with spring tension or can be epoxied for a permanent modification. 
- Lightweight, efficient design. - Tested with ETS S&W 21 round Magazines.

Beretta APX Compact Magblock 10/13 (9mm) 10 Round Limiter

This Magblock fits the factory Beretta APX Compact 13 round 9mm magazines and will limit them to 10 rounds.  Easily installed in seconds at the base of the spring. The factory locking plate is installed under the block. It is held in place with spring tension alone or can be glued or epoxied if desired.

- Simple install to make 10/13 Beretta APX Compact magazines.
- No modification to the magazine is required.
- Lightweight and will not interfere with magazine reliability.
- Works on original factory Beretta APX Compact magazines as seen in the photos. Other types of magazines will likely require modification of the limiter. 

*Please click on photos for installation instructions. 

*ATTENTION: This posting is for the Magblock (only) and not for the magazine. We don't currently sell any magazines at all.

Beretta APX Magblock 10/18 (.40) 10 Round Limiter

This Magblock fits the factory Beretta APX 18 round .40 magazines and will limit them to 10 rounds.  Easily installed in seconds at the base of the spring. The factory locking plate is installed under the block. It is held in place with spring tension alone or can be glued or epoxied if desired.

- Simple install to make 10/18 Beretta APX magazines.
- No modification to the magazine is required.
- Lightweight and will not interfere with magazine reliability.
- Works on original factory Beretta APX magazines as seen in the photos. Other types of magazines will likely require modification of the limiter. 

*Please click on photos for installation instructions. 

*ATTENTION: This posting is for the Magblock (only) and not for the magazine. We don't currently sell any magazines at all.

 Wilson Combat EDC X9 Magblock 10 Round Limiters for 18 Round Magazine

- Fits 18 round 9mm Factory Wilson Combact EDC X9 magazines as shown.
- Easy installation at the base of the spring as shown.
- Limits the magazine to 10 rounds of 9mm
- Held in place with spring tension or can be epoxied for a permanent modification.
- Lightweight, efficient design.

-This block is designed for the older Wilson Combat EDC X9 18-round magazine part# 959. This block won't workin the newer EDC X9 with the orange follower.

*ATTENTION: This posting is for the Magblock (only) and not for the magazine. We don't currently sell any magazines at all.

Magblock 10 Round Limiter for Remington 1911 R1 9mm magazines

- Fits 19 round 9mm Remington 1911R1 magazines. 
- Easy installation at the base of the spring.
- Limits the magazine to 10 rounds of 9mm. 
- Held in place with spring tension or can be epoxied for a permanent modification. 
- Lightweight, efficient design. 
- Made of a super strong, heat resistant, fiber reinforced polymer.

*** Tested on factory Remington 1911 R1 9mm double stack magazines which use a locking plate at the base. The block may need to be modified to work with magazines from other manufactures or sizes. If your magazines do not have a plastic locking plate that sits on top ot the floor plater then they will not work. 

Magblock 10 Round Limiter for STI Staccato 126mm 17 Round 9mm Magazines

- Fits 17 round 9mm Factory Staccato STI P, XC, XL 126 mm magazines. 
- Easy installation into the follower of the magazine.
- Limits the magazine to 10 rounds of 9mm. 
- Held in place with spring tension or can be epoxied for a permanent modification. 
- Lightweight, efficient design. 
- Only fits the floor plates shown. May need sanding shorter if your magazines have a floorplate locking plate.

- This block will also fit the MasterPiece arms DS9 Hybrid/2011 17-round 126mm magazines.

*Note: If you have a newer Staccato STI magazine that has G3 on the back of the magazine, then you will need to click G3 option below. This block will also work in the New Checkmate 126mm magazines. Just choose the G3 option.

AREX Rex Delta Magblock 10 Round Limiters 

- Fits 17 round 9mm Factory AREX Rex Delta magazines as shown.
- Tested in AREX Rex Delta 17 round magazine.
- Easy installation at the base of the spring as shown.
- Limits the magazine to 10 rounds of 9mm
- Held in place with spring tension or can be epoxied for a permanent modification.
- Lightweight, efficient design.

*ATTENTION: This posting is for the Magblock (only) and not for the magazine. We don't currently sell any magazines at all.