Magblocks

Glock 19 (9mm) Magblock (For Older Style Followers Only)

- Fits 15 round 9mm Foctory Glock 19 magazines.  *See details on correct follower types below. 
- Easy installation under the magazine follower.
- Limits the magazine to 10 rounds of 9mm. 
- Held in place with spring tension or can be epoxied for a permanent modification. 
- Lightweight, efficient design. 

* Please click the photos for installation instructions. Fits older style follower Glock Magazines only.
Only compatable with the follower type shown in the pictures. 

Converts 9mm AR-15 20 round magazine to 10 rounds.

- This block will work with 9mm 20 round AR-15 magazines.

- Marked where to cut for a 15 round block.

- It replaces the lower magazine locking plate.

- The spring can also be epoxied to the block which allows for disassembly. 

Magblock 10 Round Limiter for Sig Sauer 2022 SigPro 9mm 15 Round Magazines. Fits 2022 and 2009

- Fits 15 round 9mm Factory Sig Pro magazines. 
- Easy installation under the magazine follower.
- Limits the magazine to 10 rounds of 9mm. 
- Held in place with spring tension or can be epoxied for a permanent modification. 
- Lightweight, efficient design. 

The Universal limiter can be used to make this block by cutting flush with the base with #14 showing in the indicator notch. The blocks sold here are pre-cut and fixed at this length. 

Glock 21 and 41 10/13 (.45) Magblock

- Fits 13 round .45 caliber Glock 21 and 41 magazines.  *See details on correct follower types below. 
-Will also fit Korean Glock Magazines.  
- Easy installation under the magazine follower.
- Limits the magazine to 10 rounds of .45 caliber ammunition. 
- Held in place with spring tension or can be epoxied for a permanent modification. 
- Lightweight, efficient design. 

* Please click the photos for installation instructions. Fits newer generation full metal lined Glock Magazines.
Only compatible with the follower type shown in the pictures. 

* Uses a cut off Glock Limiter. The end will not end on a rib, so is not as smooth of a cut, but works great. 

* This block will work in the Ruger LC Carbine 13-round magazine chambered in .45 acp.

Magblock 10 Round Limiter for Sig 15 Round P229-1 Magazines. 
Fits the Sig P228 M11-A1

- Fits the new 15 round 9mm Factory Sig P229-1 magazines. 
- Easy installation at the base of the spring.
- Limits the magazine to 10 rounds of 9mm. 
- Held in place with spring tension or can be epoxied for a permanent modification. 
- Lightweight, efficient design. 
- Made of a super strong, heat resistant, fiber reinforced polymer.

 Magblock 10 Round Limiter for Heckler & Koch P30 and USP .40

 - Fits 13 round .40 H&K P30 and USP magazines. 
- Limits the magazine to 10 rounds of .40
- Easy installation at the base of the magazine. Sits on top of the locking plate as shown.
- Held in place with tension or can be epoxied in place.
- Lightweight, efficient design. 

FYI: The Universal Pistol Limiter cut to "6" in the indicator notch with a flush base works to limit this magazine to 10 rounds.

Magblock 10 Round Limiter for Sig P229 and P226  12 Round .40 Magazines. 

- Fits the new 12 round .40 Factory Sig P229 and P226 magazines. 
- Easy installation at the base of the spring.
- Limits the magazine to 10 rounds of .40 
- Held in place with spring tension or can be epoxied for a permanent modification. 
- Lightweight, efficient design. 
- Made of a super strong, heat resistant, fiber reinforced polymer.
-*Same as CZ 10/12 limiter and likely marked as "CZ".

FN Five-Seven Magblock 10 Round Limiter

- Fits 20 round 5.7 mm Factory FN magazines. 
- Easy installation at the base of the spring.
- Limits the magazine to 10 rounds of 5.7 mm. 
- Held in place with spring tension or can be epoxied for a permanent modification. 
- Lightweight, efficient design.

NOTE: May need to be trimmed a little shorter for proper function with 10 rounds loaded and the slide closed in some pistols.

Now offering a 5 round limiter for those who plan to use this for hunting.

* This block will work in standard FN 5.7 and FN 5.7 MK3 magazines.

Magblock 15/30 MCL (15 Round Magazine Capacity Limiter) for Thermold 30 round AR-15/M16 Magazines.

E-Lander Magblock 10/30 Magazine Capacity Limiter (10 Round Limiter)

- For use in E-Lander 30 round magazines.
- These blocks will convert a 30 round E-Lander magazine to hold only 10 rounds. 
- Replaces the E-Lander locking plate and has a built in floor plate lock.  

- These can be used with USGI Ranger Plates and L-Plates. The bottom of the limiter can be modified for this and the block shortened by 2mm to allow room for the Magpul locking plate. We offer this as an option. You can also do it yourself following the instuctions found in the FAQ section here: http://www.magazineblocks.com/magento/faq  FYI: Once the block is modified for use with a Ranger Plate or L-Plate the block can not be used without one of these products in place ot it will hold >10 rounds. 

Vepr 7.62 x 39 mm 10/30 Magblock- for SMG Tactical / Surefire Magazines

- Converts the Vepr polymer 7.62 x 39 mm 30 round magazine made by SMG Tactical to 10 rounds.

- This block fits the 30 round  Vepr SMG (Surefire Gun Mags) or Surefire Magazines. (May fit others, but not tested at this time)

- This block will replace the original magazine locking plate.

- Also fits the Saiga 30 round 7.62x39 magazines made by SMG. 

Springfield XDM .40 Magblock 15 or 10 Round Limiter

• Fits 16 round XDM .40 magazines to limit to 15 rounds. Can also limit 11 round magazine to 10 Rounds. 
• Easy installation under the magazine follower.
• Held in place with spring tension or can be epoxied for a permanent modification. 
• Lightweight, efficient design. 

Smith & Wesson M&P .40 Magblock 10 Round Limiter

- Fits 15 round .40 M&P magazines. 
- Easy installation on top of the locking plate.
- Limits the magazine to 10 rounds of .40 
- Held in place with spring tension or can be epoxied for a permanent modification. 
- Lightweight, efficient design. 

*Will not fit 2.0 version which needs a slightly longer version  

*Universal Limiter Instructions: Cut to #8 and glue flush at the bottom for 10/15 limiter. Slide lock is not used. When epoxy cures assemble magazine. The two parts of the universal limiter must be glued flush to prevent the locking plate from causing the limiter to shift sideways. #8 will show in the limiter window notch like in the photos.