Magblocks

10 Block Bulk Pack

• 10 block bulk pack. Includes ONLY the following: Pmag M2/MOE 10/30, Pmag M2/MOE 10/20, USGI 10/30, and USGI 10/20, HK G36, XD/XDm 9 and .40 Pistol blocks, and Glock 9 and .40 Pistol blocks, excluding the Glock 10/33. 
• You MUST specify the quantity and type of each block below. Please be specific. 

Excludes 10/20 Colt blocks and Gen 3 blocks

PMAG GEN M2 LR20 Magblock for .308/7.62x51 Magazine

Fits the Magpul LR20 .308/7.62x51mm Pmags (All older versions) and will convert them to hold only 10 rounds. Easy to install. You will not use the original factory locking plate with this block.

- Will NOT fit new Gen M3 Version. Fits all prior versions.

 - Dust covers still fit with 10 rounds loaded.

 - Load magazines on a closed bolt.

 - Easy to install. 

- No external magazine modifications. 

*ATTENTION: This posting is for the Magblock (only) and not for the magazine. We don't currently sell any magazines at all.

Magblock for Tapco AK47 10/30 - 15/30 Limiter  (7.62x39mm)

- This block fits the Tapco 30 round AK47 magazines 7.62x39mm and will convert them to a 10 round magazine.

- Replaces the lower locking plate for an easy and secure install.

*ATTENTION: This posting is for the Magblock (only) and not for the magazine. We don't currently sell any magazines at all.

Galil and Golani 10 Round Limiter Magblock

This block fits the steel 35 round magazines for Galil and Golani rifles and convert them to hold only 10 rounds.

New design ncludes a lower magazine spring attachment point to make installation easier. This makes a convenient epoxy location.

*(FYI some blocks may be marked 10/30. These are really 10/35 limiters)

*ATTENTION: This posting is for the Magblock (only) and not for the magazine. We don't currently sell any magazines at all.

Magblock 10/20 USGI MCL (Magazine Capacity Limiter)

Magblock 10/20 MCL (Magazine Capacity Limiter) for use in most USGI 20 round magazines in .223/5.56mm.

-Will convert a 20 round magazine to hold only 10 rounds.

-Magazines can be loaded with the bolt closed. 

You must specify the type or brand of magazine when ordering. for example Colt 20 round magazines use a modified block, but are straight 20 magazine bodies. Magazines with a slightly curved body (such as some C-Products) use different block and must be specified when ordering.

- See our FAQ section for details about using with Magpul Ranger Plates. http://www.magazineblocks.com/magento/faq or select the custom option below to buy with the bottom locking tab still in place. 

Magblock 10/30 USGI MCL (Magazine Capacity Limiter) for AR15/M16 Magazines

- For use in USGI type 30 round magazines for the AR15/M16. 
- Will also fit SCAR 16 GI Magazines.
- These blocks will convert a 30 round magazine to hold only 10 rounds.
- Works great Magpul anti-tilt followers.
- Fits Brownells, C-Products, ACS, D&H, NHMTG, Colt, and most other metal .223/5.56 mm 30 round magazines.

-Original military style green USGI followers may need to be trimmed or replaced to work properly. If your followers have a green spike in the middle this will have to be cut down to work properly. Please see the training video section or the other photo here for instructions on how to do this. The link to the FAQ section also provides more information. 

UPGRADE: Add Magblock AR 30 Round Replacement Springs. Bring new life to your old, worn, USGI magazines, and make them like new with replacement stainless steel springs. These springs exceeds USGI specs.

Flush cut pliers make easy work of cutting through the Glock, XD/XDM, Universal and Pmag limiters. Can cut universal limiters flush with the base.

Good for detail work.

-This block will work with 32 round 9mm UZI and Metalform magazines to make a 10 round magazine. It replaces the lower floor plate. The spring can also be epoxied to the block which allows for dis-assembly and cleaning, or epoxy the floor plate closed for a more secure modification.

-This block will not work in the IWI US UZI Pro magazines without modification. 

*ATTENTION: This posting is for the Magblock (only) and not for the magazine. We don't currently sell any magazines at all.

Beretta 92 Magblock 10/20 (9mm) 10 Round Limiter for ProMag 20 Round Magazines.

This Magblock fits the ProMag Beretta 92 (20 round) 9mm magazines and will limit them to 10 rounds.  Easily installed in seconds at the base of the spring. The factory locking plate is not used. It is held in place with spring tension alone or can be glued or epoxied if desired.

- Simple install to make 10/20 Beretta 92 magazines.
- No modification to the magazine is required.
- Lightweight and will not interfere with magazine reliability.
- Works on Promag Beretta 92 magazines as seen in the photos. Other types of magazines will likely require modification of the limiter. 

*Please click on photos for installation instructions. 

*ATTENTION: This posting is for the Magblock (only) and not for the magazine. We don't currently sell any magazines at all.

Magblock for ArmaLite AR10 20 Round Magazines.  10 and 15 Round Limiters.

Fits ArmaLite AR10  .308/7.62x51mm 20 round magazines and will convert them to hold either 10 or 15 rounds.

- Easy to install in seconds.
- No need to drill any holes.
- Load magazines on a closed bolt in most rifles.
- No external magazine modifications required.

New lighter, more reliable design is made from abs plastic.

Magblock 10 Round Limiter for Sig P229 & P228 13 Round Magazines

- Fits 13 round 9mm Factory Sig P228 magazines. 
- Easy installation at the base of the spring.
- Limits the magazine to 10 rounds of 9mm. 
- Held in place with spring tension or can be epoxied for a permanent modification. 
- Lightweight, efficient design. 
- Made of a super strong, heat resistant, fiber reinforced polymer.

 Magblock 10 Round Limiter for Heckler & Koch P30, VP9 and VP9SK 9mm

- Fits 15 round 9mm H&K P30, VP9 and VP9SK magazines. 
- Limits the magazine to 10 rounds of 9 mm
- Easy installation on top of the locking plate as shown in the photos.
- New, Improved design.
- Lightweight, efficient design. 

NOTE: Multiple variations of this magazine may exist. Consider ordering the Universal Kit below or un-glued option below. With this you can easily trim the slide down if needed. Most need to be at #9.  The Universal Limiter below also gives you the option to custom fit to your magazine and tension on the last round. Order the Universal at this link: 
http://www.magazineblocks.com/magento/magblock-universal-pistol-limiter.html

 *Attention: This block will not fit the new HK VP9 A1 15-round magazine.

10 Round Limiter for Steyr AUG 30 Round Polymer Magazines

Magblock 10/30 MCL (Magazine Capacity Limiter) for Steyr AUG 30 round polymer magazines in .223/5.56mm.

- This block will replace the lower spring attachment point or locking plate and convert a 30 round magazine to hold only 10 rounds.

- Customized base of the Magblock includes two locking points just like the original locking plate.

- Does not affect reliability.

- No increase in spring pressure.

SCAR 16 Magblock 10/30

- For use in the SCAR 16 FNH 30 round magazines

- These blocks will convert a 30 round SCAR 16 magazine to hold only 10 rounds.

- No modification to your original SCAR magazines is required to use these limiters.

- NOTE: For use only in FNH manufactured SCAR 16 factory magazines. For regular metal AR magazines you must use the USGI limiters.