Magblocks
Magazine Capacity Limiters also known as Magblocks for multiple rifles and pistol magazines.
-
Gen 2 Pmag 15/30 Magblock (GEN 2)
Magblock 15/30 MCL (Magazine Capacity Limiter) for Magpul 30 round Pmags in .223/5.56mm. (Gen 2)
- This block will replace the lower spring attachment point or locking plate and convert a 30 round magazine to hold only 15 rounds.
- Magazines can be loaded with the bolt closed.
- Does not affect reliability.
- No increase in spring pressure.
- Will also fit 30 round Emags.
Note: This is a trimmed down 10 round block to allow 15 rounds. These will not work in Gen M3 Pmags. Gen M3 Pmag 15 round limiters are available as a different product. These fit Gen 2 Pmags only.
$6.59 As low as: $4.95 -
Lancer L5 10/20 Magblock (5.56)
Lancer L5 10/20 MCL (Magazine Capacity Limiter) for 20 round Advanced Warfighter L5 magazines in .223/5.56mm.
- This new design block will sit on top of the lower spring attachment point or locking plate and convert a 20 round magazine to hold only 10 rounds.—
- Only fits L5 Advanced Warfighter with slide on base. Will not fit older L5 magazines.
- Does not affect reliability.
- No increase in spring pressure or wear.
- Uses a custom modified Pmag Block.
-This block will work in the New Gen2 Lancer Magazines.
*ATTENTION: This posting is for the Magblock (only) and not for the magazine. We don't currently sell any magazines at all.
$6.79 As low as: $5.95 -
Lancer L5 10/30 Magblock (5.56)
Lancer L5 10/30 MCL (Magazine Capacity Limiter) for 30 round Lancer L5 Advanced WarFighter magazines in .223/5.56mm.
- This block will replace the lower spring attachment point or locking plate and convert a 30 round magazine to hold only 10 rounds.
- Only fits L5 Advanced Warfighter with slide on base. Will not fit older L5 magazines.
- Does not affect reliability.
- No increase in spring pressure or wear.
(Note: This is a custom modified Pmag block)
-This block will also work in the 30-round 300 Blackout Lancer magazines along with the new Gen 2 Warfighter magazines.
*ATTENTION: This posting is for the Magblock (only) and not for the magazine. We don't currently sell any magazines at all.
$6.79 As low as: $5.95 -
Troy BattleMag 10/30 Magblock
Troy BattleMag 10/30 MCL (Magazine Capacity Limiter) for 30 round Troy BattleMags in .223/5.56mm.
- This block will sit on top of the Troy locking plate and convert a 30 round magazine to hold only 10 rounds.
- The optional shock absorbing floor plate will still function normally.
- Does not affect reliability.
- No increase in spring pressure or wear.
(Note: This is a custom trimmed Pmag block)
$6.95 As low as: $5.95 -
Promag AR-9mm 10/32 Magblock (9mm)
- Converts 9mm AR-15 32 round magazine to 10 rounds.
- This block will work with 9mm AR-15 magazines made by ProMag only.
- It replaces the lower floor plate.
- The spring can also be epoxied to the block which allows for disassembly and cleaning.
- We have a separate block available for UZI, C-Products, and ASC 32 round magazines. This one only fits Promag magazines.
$6.95 As low as: $5.95 -
ARSENAL CIRCLE 10 AK47 Magblock (7.62)
Arsenal Bulgarian Circle 10 AK-47 Magblock
This block fits the Arsenal 30 round AK47 magazines and will convert them to a 10 round magazine.
-Replaces the lower locking plate.
-Works on Arsenal Bulgarian 7.62x39mm AK magazines.
Note: This block is made from our Universal AK Kits cut to #38 using a square locking plate.
*ATTENTION: This posting is for the Magblock (only) and not for the magazine. We don't currently sell any magazines at all.
$7.49 As low as: $5.95 -
Springfield XD 9mm 10/16 Magblock (9mm)
Springfield XD 9mm Magblock
- Fits 16 round XD and XD Mod 2 9mm magazines.
- Easy installation under the magazine follower.
- Limits the magazine to 10 rounds of 9mm.
- Held in place with spring tension or can be epoxied for a permanent modification.
- Lightweight, efficient design.
$6.59 As low as: $5.95 -
Springfield .40 XDM 10/16 Magblock (.40)
Springfield XDM .40 Magblock 10 Round Limiter
- Fits 16 round XDM .40 magazines.
- Easy installation under the magazine follower.
- Limits the magazine to 10 rounds of .40
- Held in place with spring tension or can be epoxied for a permanent modification.
- Lightweight, efficient design.
$6.59 As low as: $5.95 -
Suomi 10/36 Magblock
Limits 36 round Suomi magazines to 10 rounds.
New design does not replace the difficult to remove lower floor plate but instead rests on top of it.
The spring can also be epoxied to the block which allows for disassembly and cleaning.
Easy and simple way to make 10/36 Suomi magazines without damaging your hard to find magazine.
These are made of heavy-duty ABS and are meant to work for the life of the magazine.
$6.95 As low as: $5.95 -
H&K MAGPUL G36 10/30 Magblock
Heckler & Koch G36 Magblock
- Works with Magpul Pmag Magazines for the HK G36 only.
- 10/30 configuration (10 rounds in a 30 round body)
- Replaces the original locking plate
- Simple quick install.
$6.29 As low as: $5.49 -
GEN M3 PMAG 10/30 Magblock (5.56)
10 Round Limiter for Gen M3 30 Round Pmags
Magblock 10/30 MCL (Magazine Capacity Limiter) for Magpul 30 round Gen M3 Pmags in .223/5.56mm.
- This block will replace the lower spring attachment point or locking plate and convert a 30 round magazine to hold only 10 rounds.
- The Pmag dust covers will still fit when loaded.
- Magazines can be loaded with the bolt closed.
- Does not affect reliability.
- No increase in spring pressure.
- This block will work in the New Magpul TMAG Gen M3 30-round magazines.
- Attention: We now offer the option to use our block with the Magpul factory retaining plate with our block. The block will sit on top of the Magpul retaining plate and is cut differently than our standard Gen M3 10/30 magblock. If you're planning on not using the factory retaining plate then we have an options for you.
*ATTENTION: This posting is for the Magblock (only) and not for the magazine. We don't currently sell any magazines at all.$6.29 As low as: $4.59 -
Springfield .45 XDM XD 10/13 Magblock (.45)
Springfield XDM XD .45 Magblock
- Fits 13 round XDM and XD .45 magazines.
- Easy installation under the magazine follower.
- Limits the magazine to 10 rounds of .45
- Held in place with spring tension or can be epoxied for a permanent modification.
- Lightweight, efficient design.
$6.59 As low as: $5.95 -
Springfield XD/XDM Compact 9mm 10/13 (9mm)
Springfield XD and XDM Compact 9mm Magblock
- Fits 13 round 9mm XD and XDM Compact magazines.
- Easy installation under the magazine follower.
- Limits the magazine to 10 rounds of 9mm.
- Held in place with spring tension or can be epoxied for a permanent modification.
- Lightweight, efficient design.*ATTENTION: This posting is for the Magblock (only) and not for the magazine. We don't currently sell any magazines at all.
$6.59 As low as: $5.95 -
Magblock For Glock 33 Round Magazine (9mm)
Glock & IMG 9mm Magblock for 33 Round (9mm) Magazines
- Fits 33 round 9mm Factory Glock 33 round magazines and Korean manufacture magazines. *See details on correct follower types below. Along with the new IMG 33 round magazine.
- Easy installation under the magazine follower.
- Limits the magazine to 10 rounds of 9mm.
- Held in place with spring tension or can be epoxied for a permanent modification.
- Lightweight, efficient design.* Please click the photos for installation instructions. Fits newer generation full metal lined Glock Magazines.
Only compatable with the follower type and magazine base extension shown in the pictures. If yours is different then modifications may be needed.$7.49 As low as: $6.49 -
SCAR 17 and RRA LAR-8 Magblock 10/20 for THERMOLD
SCAR 17 MAGBLOCK for THERMOLD 20 Round. Also fits Rock River Arms LAR-8 Polymer Magazines.
- This block will fit 7.62x51mm NATO/.308 SCAR 17 and LAR-8 Magazines made by THERMOLD and RRA ONLY.
- The block attaches to the bottom of the magazine spring and will convert 20 round magazines to hold only 10 rounds.
- No modifications to your expensive FN SCAR magazines are needed to install.
- The block can be epoxied to the spring for a permanent modification.
Made from a solid polymer. These are very strong and heat stable to over 260 degrees F. New easy to install design with spring catch.
*PATENT PENDING*
NOTE: The 10 th round may fit a little tighter in the RRA magazines, and need to be loaded with the bolt open. You can always custom fit the limiter if desired.
$10.95 As low as: $8.95
