Magblock 10 Round Limiter for CZ P-09/P-09 F Nocturne (9mm) 19 Round Magazines

- Fits 19 round 9mm CZ P-09 Full-Size - P-09 F Nocturne magazines
- Easy installation at the base of the spring.
- Limits the magazine to 10 rounds of 9mm. 
- Held in place with spring tension or can be epoxied for a permanent modification. 
- Lightweight, efficient design. 
- Made of a super strong, heat resistant, fiber reinforced polymer.

Magblock 10 Round Limiter for Browning Hi Power 13 Round Magazines

- Please note that different followers exist for Hi Power magazines. Please see the photos to determine which followers your magazines use so that you can order the correct limiter.

- Fits 13 round 9mm Hi Power magazines.
- Easy installation at the base of the spring.
- Limits the magazine to 10 rounds of 9mm.
- Held in place with spring tension or can be epoxied for a permanent modification.
- Lightweight, efficient design.
- Made of a super strong, heat resistant, fiber reinforced polymer.

*Will not work with 13 round spring assist ejection magazines. See alternative compatible product HERE. 

Smith & Wesson SD9 VE 9mm Magblock 10 Round Limiters

- Fits 16 round 9mm SD9VE, SD9G, SD9E, SD9P, SD9V and SIGMA magazines. 
- New design installs at the base of the spring.
- Limits the magazine to 10 rounds of 9mm. 
- Held in place with spring tension or can be epoxied for a permanent modification. 
- Lightweight, efficient design. - Tested with factory S&W 16 Round Magazines. 
- Save time and money, easier than pinning a magazine. Easily Block Magazines. 

*Universal Pistol Limiter Instructions: Cut to #12-13 and glue flush at the bottom for 10/16 limiter. Slide lock is not used. When epoxy cures assemble magazine. The two parts of the universal limiter must be glued flush to prevent the locking plate from causing the limiter to shift sideways. #12-13 will show in the limiter window notch like in the photos.  (Block purchased here already has this done).

Smith & Wesson 6900 Series Magblock 10/12 (9mm)

This Magblock fits the Smith & Wesson 6900 Series 12 round 9mm magazines and will limit them to 10 rounds.  The Smith & Wesson 69 Series magazine is a high-capacity magazine designed for Smith & Wesson's 69 Series. As such, this magazine will fit and function in any pistol from the series, including any of the following: 469, 669, 6904, 6906, 6924, 6926, 6944 and 6946. 

-Simple install to make 10/12 S&W magazines.
- Instals at the base of the magazine. 
-No modification to the magazine is required.
-Lightweight and will not interfere with magazine reliability.

*This posting is for the magblock (only) and not for the magazine. We don't currently sell any magazines at all.

Magblock 10 Round Limiter for CZ 75 Compact and Subcompact 9mm 14 Round Magazines by CZ

- Fits 14 round 9mm CZ-75 compact and subcompact magazines as shown in the photos.
- Easy installation at the base of the spring.- Limits the magazine to 10 rounds of 9mm. 
- Held in place with spring tension or can be epoxied for a permanent modification. 
- Lightweight, efficient design. - Tested on factory CZ-75 magazines as shown in the photos. 

*If using our Universal Limiter for this magazine: Cut to #12 and glue flush at the bottom for 10/14 limiter. Slide lock is not used. When epoxy cures assemble magazine. #12 will show in the limiter window notch like in the photos.  

Springfield XDM 10mm - XD-M Compact 10mm Magblock 10 Round Limiter

• Fits 15 round XDM 10mm and XD-M Compact 10mm magazines. 
• Easy installation under the magazine follower.
• Limits the magazine to 10 rounds of 10mm
• Held in place with spring tension or can be epoxied for a permanent modification. 
• Lightweight, efficient design. 
• NOTE: (Same limiter as the XDM .40 10/16)

This block will work with 32 round 9mm Colt, UZI and Metalform magazines to make a 10 round magazine. It replaces the lower floor plate. The spring can also be epoxied to the block which allows for dis-assembly and cleaning, or epoxy the floor plate closed for a more secure modification.

Ruger Mini 30 Magblock 10/20 Magazine Capacity Limiter

 This block is for use in RUGER 20 round factory Mini 30 magazines. These blocks will insert at the base of the magazine spring and convert a 20 round magazine to hold only 10 rounds.

- Only for use in RUGER manufactured magazines. 

Great for the range bag and to show your magazines are blocked. 

Also for patch collectors like myself :)

- 3” Round PVC 

- Hook and loop backing 

Magblock 10 Round Limiter for Magpul 30 Round AK-74 Pmag (5.45x39mm)

- This block fits the new Magpul 30 round AK74 magazines and will convert them to hold 10 rounds.

- Replaces the lower locking plate for an easy and secure install.

- Built in spring catch holds the limiter securely in place and prevents noise.

- Made of super strong heat resistant polymer.

Magblock 10 Round Magazine Capacity Limiter for Thermold 15 and 20 round AR-15/M16 Magazines.

- Will convert both a 20 or 15 round magazine to hold only 10 rounds.

- Only fits current production Thermold magazines. Has not been tested on older versions. Some modification may be needed for older production magazines. 
- The Thermold 15 and 20 round magazines use the same body size and differ only by a slight internal modification. The same limiter will limit both magazines to 10 rounds. 

Browning BDA Magblock 10/13 (.380) 10 Round Limiter

This Magblock fits the factory Browning BDA  and Beretta 84 13 round .380 magazines and will limit them to 10 rounds.  Easily installed in seconds at the base of the spring. The factory locking plate is installed under the block. It is held in place with spring tension alone or can be glued or epoxied if desired. This provides an easy method to convert your factory Browning BDA .380 magazines to 10 rounds. No external modification to the magazine is required. 

- Simple install to make 10/13 Browning BDA magazines. 
- No modification to the magazine is required.
- Lightweight and will not interfere with magazine reliability.
- Works on original factory Browning BDA and Beretta 84 magazines as shown in the photos. Other types of magazines will likely require modification of the limiter. 
*Please click on photos for installation instructions. 

If using the Universal Limiter: Cut the universal limiter to between numbers 4 to 5 showing in the indicator notch. Glue flush with the base. The front and back of the base will need to be sanded to better fit into the magazine. *The limiter sold here comes with all of this done. 

Magblock 5/10 MCL (5 Round Magazine Capacity Limiter) for Magpul 10 round Gen M3 Pmags in .223/5.56mm.

- Fits Gen M3 Pmag 10 Round Magazine
- This block will replace the lower spring attachment point or locking plate
- Will convert a 10 round magazine to hold only 5 rounds. Now offering a 1 round limiter for hunting in 350 Legend - 5.56.
- Does not affect reliability.
- No increase in spring pressure. 

*This posting is for the Magblock (only) and not for the magazine. We don't currently sell any magazines at all.

Glock Magblock -2 (9mm)

This Magblock fits the Glock magazines with a +2 extension. Will basically limit just the +2 extension so you can add it to a magazine without changing the capacity. 
- Minus 2 round adapter to limit the extended floorplate.
- Easily installed in seconds. It is held in place with spring tension alone or can be glued or epoxied if desired.
-No modification to the magazine is required.
-Lightweight and will not interfere with magazine reliability.

*This item ONLY includes the small -2 adapter. Does not include the Glock 10/17 limiter shown. 

*This will not work on all +2 Glock magazine extenios. It's only been tested on G19X, G17, G22 15-round magaiznes.