Taurus GX4 Carry Magblock 10/15 (9mm) 10 Round Limiter

This Magblock fits the factory Taurus GX4 Carry 15 round 9mm magazines and will limit them to 10 rounds. Easily installed in seconds at the base of the magazine. It is held in place with spring tension alone or can be glued or epoxied if desired or required. This provides an easy method to convert your factory Taurus GX4 Carry magazines to 10 rounds. No external modification to the magazine is required

Has been tested on original factory magazines.

Beretta PMX Magblock 10/30 (9mm) 

This Magblock fits the factory Beretta PMX 30 round 9mm magazines and will limit them to 10 rounds.  Easily installed at the base of the magazine and will replace the factory locking plate. It is held in place with spring tension alone or can be glued or epoxied if desired.

- Simple install to make 10/30 Beretta PMX magazines.
- No modification to the magazine is required.
- Lightweight and will not interfere with magazine reliability.
- Works on original factory Beretta PMX magazines as seen in the photos. Other types of magazines will likely require modification of the limiter. 

*Please click on photos or video for installation instructions. 

*ATTENTION: This posting is for the Magblock (only) and not for the magazine. We don't currently sell any magazines at all.

Kore Essentials X5 Tactical Nylon 1.5" Gun Belt (Coyote)

-Kore Reinforced Every Day Carry Gun belts are the most adjustable

-Supportive and comfortable for all day wear

-Great EDC belt designed to allow for a secure fit 

-Provides Over 40-1/4" Size Positions with it's 10" virtually indestructible, hidden track

-Fits Waist Sizes from 24" to 54" 

-Easy to cut and set up in a matter of minutes

-Ideal Everyday Carry belt that allows for easy carrying of your holstered firearm or gear

-Would be a great option for off-duty law enforcement or anyone who carriers a CCW

Kore Essentials X5 Tactical Nylon 1.5" Gun Belt (Black)

-Kore Reinforced Every Day Carry Gun belts are the most adjustable

-Supportive and comfortable for all day wear

-Great EDC belt designed to allow for a secure fit 

-Provides Over 40-1/4" Size Positions with it's 10" virtually indestructible, hidden track

-Fits Waist Sizes from 24" to 54" 

-Easy to cut and set up in a matter of minutes

-Ideal Everyday Carry belt that allows for easy carrying of your holstered firearm or gear

-Would be a great option for off-duty law enforcement or anyone who carriers a CCW

Kore Essentials B1 Black Micro Battle-Belt (Complete Kit)

-Introducing the World's First Micro Adjustable Battle belt

-Hidden track with 20+ sizing points to adjust in small ¼” increments

-Adjustable while sitting, walking, running, swimming, or even crawling

-Load Rating Of Up to 20lbs to allow for full-size firearms, magazine pouches, dump pouches, and trauma kt, etc

-Size Range for 24" to 48" 

-Each kit comes with Molle outer belt, reinforced velcro inner belt, B1 belt buckel, 1 tip keeper, measuring tape, hex wrench & set screw

-This Battle Belt is ideal for Range Days, Law Enforcement, or Firearm Training Classes

Magblock 10 Round Limiter for Canik Taran Tactical Combat 21 Round Magazines

- Fits 18 round 9mm Factory Canik w/ +3 TTI extension series magazines. 
- Easy installation under the follower and is held in place with spring tension.
- Limits the magazine to 10 rounds of 9mm. 
- Held in place with spring tension or can be epoxied for a permanent modification. 
- Lightweight, efficient design. 
- Made of a super strong, heat resistant, fiber reinforced polymer.

-Tested on factory Canik magazines with a Taran Tactical +3 extension. The block may need to be modified to work with magazines from other manufactures.

*ATTENTION: This posting is for the Magblock (only) and not for the magazine. We don't currently sell any magazines at all.

Hudson H9 9mm Magblock 10 and 15 Round Limiters

- Fits 17 round 9mm Factory  Hudson H9 9mm magazines.
- Easy installation at the base of the magazine. 
- Limits the magazine to 10 rounds of 9mm
- Held in place with spring tension or can be epoxied for a permanent modification.
- Lightweight, efficient design.

Note: This limiter can also be made using our Universal Pistol Limiter and cutting flush at the base with #20 showing in the indicaor notch. 
The limiters shown here come pre-cut and glued for a drop in conversion. 

The Walther PPX 10/16 limiter will fit this magazine and limit to 10 rounds.

Order here: http://www.magazineblocks.com/magento/products/magblock-kits/pistols/smith-wesson/smith-wesson-m-p-magblock-10-17-9mm.html

Magblock 10 Round Limiter for Pmag 15 GL9 Magazines.

- Fits 15 round Magpul Pmag GL9 magazines for Glock 19.

- Easy installation at the base of the magazine and sits on top of the locking plate.
- Limits the magazine to 10 rounds of 9mm. 
- Held in place with spring tension or can be epoxied for a permanent modification. 
- Lightweight, efficient design. 

* Please click the photos for installation instructions. Fits Magpul Pmag 15 GL9 Magazines Only. Will not fit standard Glock type Magazines.

Universal Limiter Instructions: To make this limiter using the universal pistol limiter, cut the base flush with #8 showing in the indicator notch. Then cement base and slide in place. The bottom lock is not used. 

Note: This block will fit the New Shadow Systems MR920 15 round magazine and the New Ruger RXM 15-round magaizne.

.

Magblock 10 Round Limiter for PMAG17 GL9 & Ruger RXM 17 Round Magazines.

- Fits 17 round Magpul Pmag GL9 magazines for Glock 17 and Glock 34

- Easy installation at the base of the magazine and sits on top of the locking plate.
- Limits the magazine to 10 rounds of 9mm. 
- Held in place with spring tension or can be epoxied for a permanent modification. 
- Lightweight, efficient design. 

* Please click the photos for installation instructions. Fits Magpul Pmag 17 GL9 Magazines Only. Will not fit Glock Brand Magazines.

Taurus PT92, PT99, PT917, and PT917C Magblock 10/17 (9mm) 10 Round Limiter

This Magblock fits the factory Taurus PT92, PT99, PT917, and PT917C 17 round 9mm magazines and will limit them to 10 rounds. Easily installed in seconds at the base of the magazine. It is held in place with spring tension alone or can be glued or epoxied if desired.

- Simple install to make 10/17 Taurus PT92, PT99, PT917 magazines.
- No modification to the magazine is required.
- Lightweight and will not interfere with magazine reliability.
- Works on original factory Taurus PT92, PT99, PT917, PT917C magazines as shown in the photos. Other types of magazines may require modification of the limiter.

Please click on photos for installation instructions.

Heckler & Koch UMP Magblock

- Works with H&K UMP 25 rd Magazines as shown.

- 10 and 15 round options available below.

- This block allows for the use of the original locking plate

- Simple quick installation.

- With our block it allows for the full power of the spring to be used.

Magblock 10 Round Limiter for CZ 2075 RAMI (9mm) 14 Round Magazines

- Fits 14 round 9mm CZ 2075 RAMI magazines.
- Easy installation at the base of the magazine. - Limits the magazine to 10 rounds of 9mm.
- Held in place with spring tension or can be epoxied for a permanent modification.
- Lightweight, efficient design. - Made of a super strong, heat resistant, fiber reinforced polymer. - Tested on factory CZ 2075 RAMI magazines as shown in the photos. The block may need to be modified to work with magazines from other manufactures.

FYI: This block is made using out Universal limiter. It is cut flush at the bottom with the number 11-12 shown in the indicator notch. 

Magblock 10 Round Limiter for Canik TP9, TP9SA, TP9SF, TP9SFx, Mete SFX, Mete SFT, Rival 18 Round Magazines

- Fits 18 round 9mm Factory Canik TP9 series magazines. 
- Easy installation at the base of the spring.
- Limits the magazine to 10 rounds of 9mm. 
- Held in place with spring tension or can be epoxied for a permanent modification. 
- Lightweight, efficient design. 
- Made of a super strong, heat resistant, fiber reinforced polymer.

-Tested on factory Canik TP9 magazines.The block may need to be modified to work with magazines from other manufactures.

-We now offer a Canik Rival option. If you're running the Canik Rival aluminum +0 base plates, please select the Canik Rival option. If you choose this option, you will have to run the +0 plates only.