Magblocks

Magblock 10 Round Limiter for Tisas Zigana 15 Round Magazines

- Fits 15 round 9mm Tisas Zigana & PX-9 Carry factory magazines
- Easy installation at the base of the spring.
- Limits the magazine to 10 rounds of 9mm. 
- Held in place with spring tension or can be epoxied for a permanent modification. 
- Lightweight, efficient design. 

*If using our Universal Limiter for this magazine: Cut to #15 and glue flush at the bottom for 10/15 limiter. Slide lock is not used. When epoxy cures assemble magazine. #15 with the top part of #15 will show in the limiter window notch like in the photos.  

Magblock 10 Round Limiter for Tisas PX-5.7 20 Round Magazines

- Fits 20 round 5.7x28mm PX-5.7 factory magazines
- Easy installation at the base of the spring.
- Limits the magazine to 10 rounds of 5.7x28mm. 
- Held in place with spring tension or can be epoxied for a permanent modification. 
- Lightweight, efficient design. 

Magblock 10 Round Limiter for Act-Mag - Armscor Sig Sauer P320 17 Round Magazines

- Fits 17 round 9mm Act-Mag - Armscor Sig P320 magazines. 
- Easy installation at the base of the spring.
- Limits the magazine to 10 rounds of 9mm. 
- Held in place with spring tension or can be epoxied for a permanent modification. 
- Lightweight, efficient design. 
- Made of a super strong, heat resistant polymer.

*ATTENTION: This posting is for the Magblock (only) and not for the magazine. We don't currently sell any magazines at all.

*This block is designed for the Act-Mag - Armscor Sig P320 17-round magazines. This block won't work in factory Sig Sauer P320 magazines.

Glock 9mm Magblock for 33 Round (9mm) Magazines

- Fits 35 round 9mm Toolman Tactical Glock 35 round magazines.  *See details on correct follower types below. 
- Easy installation under the magazine follower.
- Limits the magazine to 10 rounds of 9mm. 
- Held in place with spring tension or can be epoxied for a permanent modification. 
- Lightweight, efficient design. 

* Please click the photos for installation instructions. This block has been designed and tested for the Toolman Tactical Glock 35-round magazine.

Magblock 5 Round Limiter for Pmag 10 GL9 Magazines.

- Fits 10 round Magpul Pmag GL9 magazines for Glock 19.

- Easy installation at the base of the magazine and sits on top of the locking plate.
- Limits the magazine to 5 rounds of 9mm. 
- Held in place with spring tension or can be epoxied for a permanent modification. 
- Lightweight, efficient design. 

* Please click the photos for installation instructions. Fits Magpul Pmag 10 GL9 Magazines Only. Will not fit standard Glock type Magazines.

Universal Limiter Instructions: To make this limiter using the universal pistol limiter, cut the base flush with #6 showing in the indicator notch. 

Beretta 92XI Squalo & Sabbia Magblock 10/22 (9mm) 10 Round Limiter

This Magblock fits the Beretta 92XI Squalo and Beretta 92XI Sabbia 22 round 9mm magazines and will limit them to 10 rounds.  Easily installed in seconds under the follower. It is held in place with spring tension alone or can be glued or epoxied if desired.

- Simple install to make 10/22 Beretta 92XI Squalo magazines.

- No modification to the magazine is required.

- Lightweight and will not interfere with magazine reliability.

- This magblock is designed for the Mecgar made 18-round magazine with a Beretta made +4 extension.

*Please click on photos for installation instructions. 

*ATTENTION: This posting is for the Magblock (only) and not for the magazine. We don't currently sell any magazines at all.

Magblock 5/10 USGI MCL (Magazine Capacity Limiter) for AR15/M16 Magazines

- For use in USGI type 10 round magazines for the AR15/M16. 
- These blocks will convert a 10 round magazine to hold only 5 rounds.
- Works great Magpul anti-tilt followers.
- Fits Brownells, C-Products, ACS, D&H, NHMTG, Colt, and most other metal .223/5.56 mm 30 round magazines.

-Original military style green USGI followers may need to be trimmed or replaced to work properly. If your followers have a green spike in the middle this will have to be cut down to work properly. Please see the training video section or the other photo here for instructions on how to do this. The link to the FAQ section also provides more information. 

Kore Essentials B1 Coyote Micro Battle-Belt (Complete Kit)

-Introducing the World's First Micro Adjustable Battle belt

-Hidden track with 20+ sizing points to adjust in small ¼” increments

-Adjustable while sitting, walking, running, swimming, or even crawling

-Load Rating Of Up to 20lbs to allow for full-size firearms, magazine pouches, dump pouches, and trauma kt, etc

-Size Range for 24" to 48" 

-Each kit comes with Molle outer belt, reinforced velcro inner belt, B1 belt buckel, 1 tip keeper, measuring tape, hex wrench & set screw

-This Battle Belt is ideal for Range Days, Law Enforcement, or Firearm Training Classes

Kore Essentials B1 Black Micro Battle-Belt (Complete Kit)

-Introducing the World's First Micro Adjustable Battle belt

-Hidden track with 20+ sizing points to adjust in small ¼” increments

-Adjustable while sitting, walking, running, swimming, or even crawling

-Load Rating Of Up to 20lbs to allow for full-size firearms, magazine pouches, dump pouches, and trauma kt, etc

-Size Range for 24" to 48" 

-Each kit comes with Molle outer belt, reinforced velcro inner belt, B1 belt buckel, 1 tip keeper, measuring tape, hex wrench & set screw

-This Battle Belt is ideal for Range Days, Law Enforcement, or Firearm Training Classes

USGI 3-Pack Retail Packing Magblock 10/30 MCL (Magazine Capacity Limiter) for AR15/M16 Magazines

- For use in USGI type 30 round magazines for the AR15/M16. 
- Will also fit SCAR 16 GI Magazines. Not factory FN SCAR 16 magazines.
- These blocks will convert a 30 round magazine to hold only 10 rounds.
- Works great with Magpul anti-tilt followers.
- Fits Brownells, C-Products, ACS, D&H, NHMTG, Colt, and most other metal .223/5.56 mm 30 round magazines.

-Original military style green USGI followers may need to be trimmed or replaced to work properly. If your followers have a green spike in the middle this will have to be cut down to work properly. Please see the training video section or the other photo here for instructions on how to do this. The link to the FAQ section also provides more information. 

-These will not work in the Surefeed E2 USGI AR-15 magazines without modification.

Magblock for ACT-MAG Rock Island Armory/Armscor A2 1911 Double Stack 17 Round 9mm Magazines

- Fits 17 round (See pictures for details) 9mm ACT-Mag RIA A2 1911 Double Stack magazines. 
- Easy installation at the base of the magazine.
- Limits the magazine to 10 rounds of 9mm. 
- Held in place with spring tension or can be epoxied for a permanent modification. 
- Lightweight, efficient design. 

Promag Beretta PX4 Magblock 10/17 (9mm) 10 Round Limiter

This Magblock fits the Promag Beretta PX4 17 round 9mm magazines and will limit them to 10 rounds.  Easily installed in seconds at the base of the spring. The factory locking plate is installed under the block. It is held in place with spring tension alone or can be glued or epoxied if desired.

- Simple install to make 10/17 Promag Beretta PX4 magazines.
- No modification to the magazine is required.
- Lightweight and will not interfere with magazine reliability.
- Will only work on Promag Beretta PX4 (PM Part# BER-A14) magazines as seen in the photos. Other types of magazines will likely require modification of the limiter. 

*Please click on photos for installation instructions.

*ATTENTION: This posting is for the Magblock (only) and not for the magazine. We don't currently sell any magazines at all. 

Promag Beretta 92F Magblock 10/17 (9mm) 10 Round Limiter

This Magblock fits the Promag Beretta 92F 17 round 9mm magazines and will limit them to 10 rounds.  Easily installed in seconds at the base of the spring. The factory locking plate is installed under the block. It is held in place with spring tension alone or can be glued or epoxied if desired.

- Simple install to make 10/17 Promag Beretta 92F magazines.
- No modification to the magazine is required.
- Lightweight and will not interfere with magazine reliability.
- Will only work on Promag Beretta 92F (PM Part# BER-A12) magazines as seen in the photos. Other types of magazines will likely require modification of the limiter. 

*Please click on photos for installation instructions. 

*ATTENTION: This posting is for the Magblock (only) and not for the magazine. We don't currently sell any magazines at all.

Promag Ruger SR9 and SR9C 10/17 Magblock 10 Round Limiter for 17 Round Magazines

This Magblock fits the Promag Ruger SR9 ands SR9C 9mm, 17 round magazines and will limit them to 10 rounds.  Easily installed in seconds at the base of the magazine. It is held in place with spring tension alone or can be glued or epoxied if desired.
-Simple install to make 10 round Ruger SR9 Magazines.
-No modification to the magazine is required.
-Lightweight and will not interfere with magazine reliability.

- This block is designed for the Promag Ruger SR9 17-rd magazine only, and will not fit factory Ruger SR9 magazines.