Magblocks

Magblock 10 Round Limiter for ProMag Para Ordnance P14 .45 magazines

- Fits 14 round .45 ProMag Para Ordnance P14 magazines. 
- Easy installation at the base of the spring.
- Limits the magazine to 10 rounds of .45. 
- Held in place with spring tension or can be epoxied for a permanent modification. 
- Lightweight, efficient design. 
- Made of a super strong, heat resistant, fiber reinforced polymer.

*** Tested on Promag Para Ordnance P14 .45 magazines which use a locking plate at the base. The block may need to be modified to work with magazines from other manufactures or sizes. 

** This block won't work in Mecgar or factory Para magazines. 

Taran Tactical Smith & Wesson M&P Full Size 9mm Magblock 10 Round Limiters

- Fits 17 round 9mm M&P w/ a Taran Tactical +4 extensions
- Will also fit 2.0 models
- Also reported to work with full frame magazines limited to 15 rounds that have extra spring coils at the base of the magazine. (see photos)
- New design installs at the base of the spring.
- Limits the magazine to 10 rounds of 9mm. 
- Held in place with spring tension or can be epoxied for a permanent modification. 
- Lightweight, efficient design. - Tested with factory S&W Magazines with a Taran Tactical +4 Magazine Extension with factory S&W mag spring.

*Please click on photos at left for installation instructions. New design installs at the base of the spring and sits on top of the original locking plate.

*ATTENTION: This posting is for the Magblock (only) and not for the magazine. We don't currently sell any magazines at all.

Smith & Wesson M&P Shield Plus 30 Super Carry 10 Round Limiter

- Fits 13 round 9mm M&P Shield Plus magazines chambered in 30 Super Carry. 
- Easy installation at the base of the spring.
- Limits the magazine to 10 rounds of 30 Super Carry. 
- Held in place with spring tension or can be epoxied for a permanent modification. 
- Lightweight, efficient design. 

Taurus TH10 Magblock 10/15 (10mm) 10 Round Limiter

This Magblock fits the factory Taurus TH10 15 round 10mm magazines and will limit them to 10 rounds. Easily installed in seconds at the base of the magazine. It is held in place with spring tension alone or can be glued or epoxied if desired.

- Simple install to make 10/15 Taurus TH10 magazines.
- No modification to the magazine is required.
- Lightweight and will not interfere with magazine reliability.
- Works on original factory Taurus TH10 magazines as shown in the photos. Other types of magazines may require modification of the limiter.

IWI MASADA SLIM Magblock 10 Round Limiter

- Fits 13 round 9 mm Made in Italy IWI MASADA SLIM magazines. 
- Easy installation at the base of the magazine.
- Limits the magazine to 10 rounds of 9 mm. 
- Held in place with spring tension or can be epoxied for a permanent modification. 
- Lightweight, efficient design. 

MecGar Tanfoglio Witness 9mm Magblock Round Limiter for 19 Round Magazines

This Magblock fits the Mecgar Tanfoglio Witness Large Frame/Small Frame 9mm 19 round magazines and will limit them to 10 rounds.  Easily installed in seconds at the base of the magazine. It is held in place with spring tension alone or can be glued or epoxied if desired.
-Simple install to make 10 round Tanfoglio Stock Master and  Italia Defiant Stock Magazines.
-No modification to the magazine is required.
-Lightweight and will not interfere with magazine reliability.

"Universal Limiter Instuctions: To make this limiter from a universal cut the base flush with "21" showing in the indicator notch. Cement the base and slide together. Limiters ordered on this listing come Premade to these specifications. 

Magblock 10 Round Limiter for Kimber KDS9c (9mm) 18 Round Magazines

- Fits 18 round Kimber KDS9C 9mm magazines
- Easy installation under the follower of the magazine - Limits the magazine to 10 rounds of 9mm.
- Held in place with spring tension or can be epoxied for a permanent modification. 
- Lightweight, efficient design. - Made of a super strong, heat resistant, fiber reinforced polymer. - Tested on Kimber KDS9c 18 round magazine.

Charles Daly PAK-9 GLOCK 9mm Magblock for 33 Round (9mm) Magazines

- Fits 33 round 9mm Charles Daly PAK-9 33 round magazines manufacture magazines.  *See details on correct follower types below. 
- Easy installation under the magazine follower.
- Limits the magazine to 10 rounds of 9mm. 
- Held in place with spring tension or can be epoxied for a permanent modification. 
- Lightweight, efficient design. 

*This block will only work in the Charles Daly PAK-9 9mm 33-round magazines, and will not work in factory Glock 33-round magaiznes without modifcation.

Magblock 10 Round Limiter for Browning Hi Power 13 Round Magazines

- Please note that this block will only work in the factory original Inglis magazines with the Metal Alloy Follower (Sku#: BHP13RM).

- Fits 13 round 9mm Browning Inglis Hi Power magazines.
- Easy installation at the base of the spring.
- Limits the magazine to 10 rounds of 9mm.
- Held in place with spring tension or can be epoxied for a permanent modification.
- Lightweight, efficient design.
- Made of a super strong, heat resistant, fiber reinforced polymer.

*Will not work with 13 round spring assist ejection magazines. See alternative compatible product HERE. 

 Wilson Combat 1911 KZ-9 Compact Magblock 10 Round Limiters

- Fits 14 round 9mm Factory Wilson Combact 1911 KZ-9 Compact magazines as shown.
- Easy installation at the base of the spring as shown.
- Limits the magazine to 10 rounds of 9mm
- Held in place with spring tension or can be epoxied for a permanent modification.
- Lightweight, efficient design.

Universal Limiter Instructions:  To make this limiter out of the Universal  just cut flush at the base with number 11+sides shown in the indicator notch. Cement together after testing fit. 

Shadow System CR920X Factory 10/15  (9mm) Magblock

- Fits 15 round 9mm Shadow System CR920X  magazines.  
- Easy installation at the base of the magazine.
- Limits the magazine to 10 rounds of 9mm. 
- Held in place with spring tension or can be epoxied for a permanent modification. 
- Lightweight, efficient design. 

 -Block is designed to work in the Shadow Systems subcompact high-capacity pistol magazine, made by Shadown Systems.

Mission First Tactical Extreme Duty AR-10 Magazine Limiter for 20 Round Magazines

Fits the Mission First Tactical AR-10 .308/7.62x51mm magazines and will convert them to hold only 5, 10, or 15 rounds. Select desired size below. Easy to install. 

- Load magazines on a closed bolt in most rifles.

- Easy to install.

- No external magazine modifications.

-This block requires you to use the factory Mission First Tactical locking plate with our block to work correctly. 

*ATTENTION: This posting is for the Magblock (only) and not for the magazine. We don't currently sell any magazines at all.

Glock 19 (9mm) Factory 5 Round Magazine Magblock for 10 Round Factory Magazine

- Fits 10 round 9mm Glock 19 magazines.  
- Easy installation at the base of the magazine.
- Limits the magazine to 5 rounds of 9mm ammunition for hunting. 
- Held in place with spring tension or can be epoxied for a permanent modification. 
- Lightweight, efficient design. 

-This block is design to limit Factory Glock 19 (9mm) 10 round magazines to 5 rounds for hunting.

*ATTENTION: This posting is for the Magblock (only) and not for the magazine. We don't currently sell any magazines at all.

S&W BODYGUARD 2.0 (.380) Magblock

- Fits 12 round .380 auto caliber Smith & Wesson Bodyguard 2.0 Magazines.  

- Easy installation at the base of the magazine.
- Limits the magazine to 10 rounds of .380 auto caliber ammunition. 
- Held in place with spring tension or can be epoxied for a permanent modification. 
- Lightweight, efficient design. 

-This block has only been tested on factory Smith and Wesson Bodyguard 2.0 12-round magazines, and will not work in other magazines without testing.

-This block is also used in the S&W 4006 series 11-round .40 magazines and is labed 4006.

*ATTENTION: This posting is for the Magblock (only) and not for the magazine. We don't currently sell any magazines at all.