Magblocks

Magblock 10 and 15 Round Limiter for Rock Island Armory/Armscor A2 1911 Double Stack 20 Round 9mm Magazines

- Fits 17 round +3 Dawson Precision extension (See pictures for details) 9mm RIA A2 1911 Double Stack magazines. 
- Easy installation at the base of the magazine.
- Limits the magazine to 10 rounds of 9mm. 
- Held in place with spring tension or can be epoxied for a permanent modification. 
- Lightweight, efficient design. 

-This block is only designed to work with the 2nd aftermarket purple piece. If you do not have this piece, then this block won't work for your magazine.

Magblock 10 and 15 Round Limiter for Rock Island Armory/Armscor A2 1911 Double Stack 17 Round 9mm Magazines

- Fits 17 round +2 extension (See pictures for details) 9mm RIA A2 1911 Double Stack magazines. 
- Easy installation at the base of the magazine.
- Limits the magazine to 10 rounds of 9mm. 
- Held in place with spring tension or can be epoxied for a permanent modification. 
- Lightweight, efficient design. 

Kalashnikov Polymer AK47 10 and 15 Round Magblock Limiter

This block fits the Kalashnikov Polymer 30 round AK47 magazines and will convert them to a 10 round magazine.

-Replaces the lower locking plate.

-Works on Kalashnikov Polymer 7.62x39mm AK magazines.

Note: This block is made from our Universal AK Kits cut to #39 using a square locking plate.

PROMAG Ruger Mini 30 Magblock 10/20 Magazine Capacity Limiter

 This block is for use in PROMAG RUGER 20 round Mini 30 magazines. These blocks will insert at the base of the magazine spring and convert a 20 round magazine to hold only 10 rounds.

- Only for use in PROMAG manufactured magazines. 

- Designed to work in the polymer magazine only.

Magblock 10 Round Limiter for H&K MP5 9mm 15 Round Magazines

- Fits 15 round 9mm HK MP5 factory magazines.
- Limits the magazine to 10 rounds of 9mm
- Held in place with spring tension or can be epoxied for a permanent modification. (Follower insert requires epoxy or silicone to securely hold in place).
- Lightweight, efficient design. 

*ATTENTION: This posting is for the Magblock (only) and not for the magazine. We don't currently sell any magazines at all.

Springfield Hellcat Pro 9mm 10/17 Magblock

- Fits 17 round 9mm Hellcat Pro magazines. 
- Easy installation under the magazine follower.
- Limits the magazine to 10 rounds of 9mm. 
- Held in place with spring tension or can be epoxied for a permanent modification. 
- Lightweight, efficient design. 

Shield Arms Glock 43X and Glock 48 (9mm) Magblock

- Fits Shield Arms 15+2 round for Glock 43x and Glock 48.
- Easy installation at the base of the magazine.
- Limits the magazine to 10 rounds of 9mm. 
- Held in place with spring tension or can be epoxied for a permanent modification. 
- Lightweight, efficient design. 

Note: This block will work in Gen 1, Gen 2, and Gen 3 magazines.

 *ATTENTION: This posting is for the Magblock (only) and not for the magazine. We don't currently sell any magazines at all.

Magblock 10 Round Limiter for B&T USW-A1 Full-Size 17 Round Magazines

- Fits 17 round 9mm Brugger and Thomet factory magazines
- Easy installation at the base of the spring.
- Limits the magazine to 10 rounds of 9mm. 
- Held in place with spring tension or can be epoxied for a permanent modification. 
- Lightweight, efficient design. 

*If using our Universal Limiter for this magazine: Cut to #15 and glue flush at the bottom for 10/17 limiter. Slide lock is not used. When epoxy cures assemble magazine. #15 will show in the limiter window notch like in the photos.  

Tara Defense TM-X - TM-9X Magblock 10 Round Limiter

- Fits 17 round 9mm Tara Defense TM-X and TM-9X magazines as shown.
- Tested in Tara Defense 17 round magazine.
- Easy installation at the base of the spring as shown.
- Limits the magazine to 10 rounds of 9mm
- Held in place with spring tension or can be epoxied for a permanent modification.
- Lightweight, efficient design.

* This posting is for the Magblock only, and not for the magazine. We don't currently sell any magazines at all.

CZ Bren 2 (5.56x45) 10 and 15 Round Magblock Limiter

This block fits the CZ Bren 2 30 round 5.56x45 magazines and will convert them to a 10 round magazine.

-Replaces the lower locking plate.

-Works on CZ Bren 2  5.56x45 magazines.

Note: This block is made from a cut down Gen2 PMag block.

Smith & Wesson SD40 VE .40 Magblock 10 Round Limiters

- Fits 15 round Promag .40 SD40 magazines. 
- New design installs at the base of the spring.
- Limits the magazine to 10 rounds of .40 cal. 
- Held in place with spring tension or can be epoxied for a permanent modification. 
- Lightweight, efficient design. - Tested with Promag S&W 15 Round Magazines. 
- Save time and money, easier than pinning a magazine. Easily Block Magazines. 

*Universal Pistol Limiter Instructions: Cut to #12 and glue flush at the bottom for 10/14 limiter. Slide lock is not used. When epoxy cures assemble magazine. The two parts of the universal limiter must be glued flush to prevent the locking plate from causing the limiter to shift sideways. #12 will show in the limiter window notch like in the photos.  (Block purchased here already has this done).

This block is design for Promag S&W SD40 magazine only.

MecGar Bul Cherokee, Bul Cherokee Compact 9mm Magblock Round Limiter for 17 Round Magazines

This Magblock fits the Mecgar Bul Cherokee / Tanfoglio Witness Small Frame 9mm, 17 round magazines and will limit them to 10 rounds.  Easily installed in seconds at the base of the magazine. It is held in place with spring tension alone or can be glued or epoxied if desired.
-Simple install to make 10 round Bul Cherokee, Bul Cherokee Compact, Tanfoglio Witness Small Frame Magazine
-No modification to the magazine is required.
-Lightweight and will not interfere with magazine reliability.

MecGar Part#: MGWIT9SFAFC

*ATTENTION: This posting is for the Magblock (only) and not for the magazine. We don't currently sell any magazines at all.

Magblock 10 Round Limiter for Browning Hi Power 13 Round Magazines

- Please note that this block will only work in the factory original Inglis magazines with the Metal Alloy Follower (Sku#: BHP13RM).

- Fits 13 round 9mm Browning Inglis Hi Power magazines.
- Easy installation at the base of the spring.
- Limits the magazine to 10 rounds of 9mm.
- Held in place with spring tension or can be epoxied for a permanent modification.
- Lightweight, efficient design.
- Made of a super strong, heat resistant, fiber reinforced polymer.

*Will not work with 13 round spring assist ejection magazines. See alternative compatible product HERE. 

Taran Tactical Smith & Wesson M&P Full Size 9mm Magblock 10 Round Limiters

- Fits 17 round 9mm M&P w/ a Taran Tactical +6 extensions
- Will also fit 2.0 models
- New design installs at the base of the spring.
- Limits the magazine to 10 rounds of 9mm. 
- Held in place with spring tension or can be epoxied for a permanent modification. 
- Lightweight, efficient design. - Tested with factory S&W Magazines with a Taran Tactical +6 Magazine Extension with factory S&W mag spring.