Magblocks
Magazine Capacity Limiters also known as Magblocks for multiple rifles and pistol magazines.
-
SAR USA K2 45 Magblock 10/14 (.45)
Magblock 10 Round Limiter for SAR K245 .45 14 Round Magazines
- Fits 14 round .45 SAR K245 magazines.
- Easy installation at the base of the spring.
- Limits the magazine to 10 rounds of .45.
- Held in place with spring tension or can be epoxied for a permanent modification.
- Lightweight, efficient design.
- Made of a super strong, heat resistant, fiber reinforced polymer.*** Tested on factory SAR K245 14 Round.45 magazines which use a locking plate at the base. The block may need to be modified to work with magazines from other manufactures or sizes. If your magazines do not have a plastic locking plate that sits on top ot the floor plater then they will not work.
*ATTENTION: This posting is for the Magblock (only) and not for the magazine. We don't currently sell any magazines at all.
$6.59 As low as: $5.95 -
Beretta APX Centurion Magblock 10/15 (9mm)
Beretta APX Centurion Magblock 10/15 (9mm) 10 Round Limiter
This Magblock fits the factory Beretta APX Centurion 15 round 9mm magazines and will limit them to 10 rounds. Easily installed in seconds at the base of the spring. The factory locking plate is installed under the block. It is held in place with spring tension alone or can be glued or epoxied if desired.
- Simple install to make 10/15 Beretta APX Full-Size magazines. This Block Won't Fit The 15-Round Full-Size Magazine.
- No modification to the magazine is required.
- Lightweight and will not interfere with magazine reliability.
- Works on original factory Beretta APX Centurion magazines as seen in the photos. Other types of magazines will likely require modification of the limiter.*Please click on photos for installation instructions.
*ATTENTION: This posting is for the Magblock (only) and not for the magazine. We don't currently sell any magazines at all.
$6.59 As low as: $5.95 -
Kimber Mako CDS9 Magblock 10/13 (9mm)
Magblock 10 Round Limiter Kimber Mako CDS9 (9mm) 13 Round Magazines
- Fits 13 round 9mm CDS9 magazines
- Easy installation under the follower.- Limits the magazine to 10 rounds of 9mm.
- Held in place with spring tension or can be epoxied for a permanent modification.
- Lightweight, efficient design. - Made of a super strong, heat resistant, fiber reinforced polymer. - Tested on Kimber Mako CDS9 13 round magazine.*ATTENTION: This posting is for the Magblock (only) and not for the magazine. We don't currently sell any magazines at all.
$6.59 As low as: $5.95 -
MecGar Beretta 92FS Compact, M9 Magblock (9mm)
Mecgar Beretta 92FS Compact - M9 Magblock 10/18 (9mm) 10 & 15 Round Limiter
This Magblock fits the Mecgar made Beretta 92FS Compact/M9 18 round 9mm magazines and will limit them to 10 rounds. Easily installed in seconds at the base of the spring. The factory locking plate is installed under the block. It is held in place with spring tension alone or can be glued or epoxied if desired.
- Simple install to make 10/18 Mecgar Beretta 92FS Compact magazines.
- No modification to the magazine is required.
- Lightweight and will not interfere with magazine reliability.
- Works on Mecgar made Beretta 92FS Compact - M9 magazines as seen in the photos. Other types of magazines will likely require modification of the limiter.*Please click on photos for installation instructions.
*ATTENTION: This posting is for the Magblock (only) and not for the magazine. We don't currently sell any magazines at all.
$6.59 As low as: $5.95 -
Smith & Wesson M&P FPC Magblock (.40)
Smith & Wesson M&P FPC .40 Magblock 10 & 15 Round Limiter
- Fits 20 round .40S&W M&P FPC (Folding Pistol Caliber Carbine) magazines.
- New design installs at the base of the spring.
- Limits the magazine to 10 rounds of 9mm.
- Held in place with spring tension or can be epoxied for a permanent modification.
- Lightweight, efficient design. - Tested with factory S&W Magazines.*Please click on photos at left for installation instructions. New design installs at the base of the spring and sits on top of the original locking plate.
*Attention: This block has only been tested on the factory Smith & Wesson FPC .40 20-round magazine and might need to be modified to work in other aftermarket magazines.
*ATTENTION: This posting is for the Magblock (only) and not for the magazine. We don't currently sell any magazines at all.
$6.95 As low as: $5.95 -
Zastava Metal AK47 10/30 Magblock (7.62x39)
Magblock for Zastava Metal AK47 (7.62x39mm) Magazines.
- This block fits the Zastava Metal USA Made 30 round AK47 magazines in 7.62x39mm and will convert them to a 10 round magazine.
- Replaces the lower locking plate for an easy and secure install.
Want to upgrade to the best stainless steel AK replacement springs available? See our upgrade springs here: LINK
*This posting is for the magblock (only) and not for the magazine. We don't currently sell any magazines at all.
$6.95 As low as: $5.95 -
Springfield 1911 DS Prodigy Compact, 3.5 AOS Magblock (9mm)
Magblock 10 Round Limiter for Springfield DS 1911 Prodigy Compact 15 Round 9mm Magazines
- Fits 15 round 9mm Factory Springfield Prodigy 1911 DS Compact magazines.
- Easy installation into the follower (See pictures).
- Limits the magazine to 10 rounds of 9mm.
- Held in place with spring tension or can be epoxied for a permanent modification.
- Lightweight, efficient design.*This posting is for the magblock (only) and not for the magazine. We don't currently sell any magazines at all.
$6.95 As low as: $5.95 -
KCI AK-47 10/40 Magblock (7.62)
Magblock for KCI Gen 2 AK47 (7.62x39mm) Magazines.
- This block fits the KCI Gen 2 40 round AK47 magazines in 7.62x39mm and will convert them to a 10 or 15 round magazine.
- Replaces the lower locking plate for an easy and secure install.
- You must use the 2-piece adapter with our block to function correctly.
*ATTENTION: This posting is for the Magblock (only) and not for the magazine. We don't currently sell any magazines at all.
$9.95 As low as: $7.95 -
H&K UMP Magblock 10/30 (10mm)
Heckler & Koch UMP 10mm/40 Magblock
- Works with H&K UMP 10mm - 40S&W 30rd Magazines as shown.
- 10 and 15 round options available below. Also a 5 round options for hunting
- This block will replace the factory locking plate
- Simple quick installation.
- With our block it allows for the full power of the spring to be used.
-This block has only been tested in the German made UMP 10mm - .40 magazines.
*This posting is for the magblock (only) and not for the magazine. We don't currently sell any magazines at all.
$7.49 As low as: $6.49 -
Beretta 80X Magblock 10/15 (.380)
Beretta 80X Magblock 10/15 (.380) 10 Round Limiter
This Magblock fits the factory Beretta 80X 15 round .380 magazines and will limit them to 10 rounds. Easily installed in seconds at the base of the spring. The factory locking plate is installed under the block. It is held in place with spring tension alone or can be glued or epoxied if desired.
- Simple install to make 10/15 Beretta 80X magazines.
- No modification to the magazine is required.
- Lightweight and will not interfere with magazine reliability.
- Works on original factory Beretta 80X magazines as shown in the photos. Other types of magazines may require modification of the limiter.
*Please click on photos for installation instructions.*ATTENTION: This posting is for the Magblock (only) and not for the magazine. We don't currently sell any magazines at all.
$6.69 As low as: $5.95 -
Kore Essential X5 Gun Belt
Kore Essentials X5 Tactical Nylon 1.5" Gun Belt (Gray)
-Kore Reinforced Every Day Carry Gun belts are the most adjustable
-Supportive and comfortable for all day wear
-Great EDC belt designed to allow for a secure fit
-Provides Over 40-1/4" Size Positions with it's 10" virtually indestructible, hidden track
-Fits Waist Sizes from 24" to 54"
-Easy to cut and set up in a matter of minutes
-Ideal Everyday Carry belt that allows for easy carrying of your holstered firearm or gear
-Would be a great option for off-duty law enforcement or anyone who carriers a CCW
$54.95 -
Kore Essential X6 Gun Belt
Kore Essentials X6 Tactical Nylon 1.5" Gun Belt (Black)
-Kore Reinforced Every Day Carry Gun belts are the most adjustable
-Supportive and comfortable for all day wear
-Great EDC belt designed to allow for a secure fit
-Provides Over 40-1/4" Size Positions with it's 10" virtually indestructible, hidden track
-Fits Waist Sizes from 24" to 54"
-Easy to cut and set up in a matter of minutes
-Ideal Everyday Carry belt that allows for easy carrying of your holstered firearm or gear
-Would be a great option for off-duty law enforcement or anyone who carriers a CCW
$54.95 -
Kore Essential X6 Gun Belt
Kore Essentials X6 Tactical Nylon 1.5" Gun Belt (Coyote)
-Kore Reinforced Every Day Carry Gun belts are the most adjustable
-Supportive and comfortable for all day wear
-Great EDC belt designed to allow for a secure fit
-Provides Over 40-1/4" Size Positions with it's 10" virtually indestructible, hidden track
-Fits Waist Sizes from 24" to 54"
-Easy to cut and set up in a matter of minutes
-Ideal Everyday Carry belt that allows for easy carrying of your holstered firearm or gear
-Would be a great option for off-duty law enforcement or anyone who carriers a CCW
$54.95 -
Kore Essential X6 Gun Belt
Kore Essentials X6 Tactical Nylon 1.5" Gun Belt (Ranger Green)
-Kore Reinforced Every Day Carry Gun belts are the most adjustable
-Supportive and comfortable for all day wear
-Great EDC belt designed to allow for a secure fit
-Provides Over 40-1/4" Size Positions with it's 10" virtually indestructible, hidden track
-Fits Waist Sizes from 24" to 54"
-Easy to cut and set up in a matter of minutes
-Ideal Everyday Carry belt that allows for easy carrying of your holstered firearm or gear
-Would be a great option for off-duty law enforcement or anyone who carriers a CCW
$54.95 -
SIG MCX-SPEAR Magblock 10/20 (6.8x51)
SIG SAUER MCX-SPEAR 6.8X51, 7.62x51, 6.5 CREED, 277 FURY Magblock Limiter
- This block will convert a 20 round magazine to hold only 10 rounds.
- Only fits the "New" Sig Sauer made MCX-Spear 6.8x51mm, 7.62 nato, 277 Fury 20-round magazines.
- Does not affect reliability.
- No increase in spring pressure or wear.
Note: This is a custom modified Pmag block and allows for use of the factory locking plate. This block will not work in the Lancer MCX-Spear 20-round magazines. If you need a magblock for the Lancer MCX-Spear 20-round magazine check in the related products under this posting.*This posting is for the magblock (only) and not for the magazine. We don't currently sell any magazines at all.
$6.95 As low as: $5.95
