Magblocks

 Magblock 10 Round Limiter for Diamondback AM2 9mm

- Fits 12 round 9mm Diamondback AM2 magazines. 
- Limits the magazine to 10 rounds of 9 mm
- Easy installation under the follower as shown in the photos.
- New, Improved design.
- Lightweight, efficient design. 

 *ATTENTION: This posting is for the Magblock (only) and not for the magazine. We don't currently sell any magazines at all.

Magblock for Chinese Norinco AKS - AK-47 (.223) Magazines.

- This block fits the Norinco 30 round AKS - AK47 magazines in .223/5.56 and will convert them to a 10 round magazine.

- Replaces the lower locking plate for an easy and secure install.

Want to upgrade to the best stainless steel AK replacement springs available? See our upgrade springs here: LINK

- This block is designed for the Norinco AKS-AK-47 .223/556 magazines only.

*ATTENTION: This posting is for the Magblock (only) and not for the magazine. We don't currently sell any magazines at all.

Sig Sauer 522 22LR Magblock 10 and 15 Round Limiter

- This block will convert 20 round Sig Sauer 522 22LR magazines into a 10 round magazine.

- Easy to install without damage to your magazines.

- This block allows for the use of the factory locking plate.

- This block will only work in the magazine like shown in the photos.

*ATTENTION: This posting is for the Magblock (only) and not for the magazine. We don't currently sell any magazines at all.

Magblock 10 Round Limiter Girsan Witness2311 11 Round .45 Magazines

- Fits 11 round .45 Girsan Witness2311 magazine made by Checkmate. 
- Easy installation into the follower of the magazine.
- Limits the magazine to 10 rounds of .45
- Held in place with spring tension or can be epoxied for a permanent modification. 
- Lightweight, efficient design. 
- Only fits the floor plates shown. May need sanding shorter if your magazines have a floorplate locking plate.

-This block has been tested on Girsan Witness 2311 magazine made by Checkmate. This block has not been tested on any other brand of magazine.

*This posting is for the magblock (only) and not for the magazine. We don't currently sell any magazines at all.

Magblock 10 Round Limiter Girsan Witness2311 15 Round 10mm - .40 Magazines

- Fits 15 round 10mm/.40 S&W Girsan Witness2311 magazine made by Checkmate. 
- Easy installation into the follower of the magazine.
- Limits the magazine to 10 rounds of 10mm - .40 
- Held in place with spring tension or can be epoxied for a permanent modification. 
- Lightweight, efficient design. 
- Only fits the floor plates shown. May need sanding shorter if your magazines have a floorplate locking plate.

-This block has been tested on Girsan Witness 2311 magazine made by Checkmate. This block has not been tested on any other brand of magazine.

*ATTENTION: This posting is for the Magblock (only) and not for the magazine. We don't currently sell any magazines at all.

Magblock 10 Round Limiter for H&K MP7 4.6x30mm 40 Round Magazines

- Fits 40 round 4.6x30mm HK MP7 factory magazines.
- Limits the magazine to 10 rounds of 4.6x30mm.
- Held in place with spring tension or can be epoxied for a permanent modification. 
- Lightweight, efficient design. 
- See Video below for installation instructions.

This block will work with 10 round 9mm Grand Power Stribog magazines to make a 5 or 2 round magazine. Block allows you to use the stock locking plate.

Taurus GX2 Magblock 10/13 (9mm) 10 Round Limiter

This Magblock fits the factory Taurus GX2 13 round 9mm magazines and will limit them to 10 rounds. Easily installed in seconds at the base of the magazine. It is held in place with spring tension alone or can be glued or epoxied if desired or required. This provides an easy method to convert your factory Taurus GX2 magazines to 10 rounds. No external modification to the magazine is required

*ATTENTION: This posting is for the Magblock (only) and not for the magazine. We don't currently sell any magazines at all.

Magblock 10 Round Limiter for Springfield Kuna 9mm 30 Round Magazines

- Fits 30 round 9mm Springfield Kuna factory magazines.
- Easy installation.
- Limits the magazine to 10 rounds of 9mm
- Held in place with spring tension or can be epoxied for a permanent modification. 
- Lightweight, efficient design. 
- Made of a super strong, heat resistant, fiber reinforced polymer.

*ATTENTION: This posting is for the Magblock (only) and not for the magazine. We don't currently sell any magazines at all.
 

HERA ARMS INDUSTRIES H3 Magblock 

- For use in Hera Arms H3 AR-15 type 30 round magazines for the AR15/M16. 
- These blocks will convert a 30 round magazine to hold only 10 or 15 rounds.

- This posting is for the Magblock (Only) and not for the magazine. You will not receive a magazine with your order.

Mecgar Beretta 92FS Compact - M9 Magblock 10/16 (9mm) 10 & 15 Round Limiter

This Magblock fits the Mecgar made Beretta 92FS Compact/M9 16 round 9mm magazines and will limit them to 10 rounds.  Easily installed in seconds at the base of the spring. The factory locking plate is installed under the block. It is held in place with spring tension alone or can be glued or epoxied if desired.

- Simple install to make 10/16 Mecgar Beretta 92FS Compact magazines.
- No modification to the magazine is required.
- Lightweight and will not interfere with magazine reliability.
- Works on Mecgar made Beretta 92FS Compact - M9 magazines (Only) as seen in the photos (with Bright Green Followers). Other types of magazines will likely require modification of the limiter. 

*Please click on photos for installation instructions. 

 *ATTENTION: This posting is for the Magblock (only) and not for the magazine. We don't currently sell any magazines at all.

WILSON COMBAT AR-15 (5.56x45) 10 and 15 Round Magblock Limiter

This block fits the Wilson Combat AR-15 30 round 5.56x45 magazines and will convert them to a 10 or 15 round magazine.

-This block is designed to use the factory retaining plate with our block.

-Works on Wilson Combat 30 round AR-15  5.56x45 magazine shown in the photos.

Note: This block is made from a cut down Gen2 PMag block.

*ATTENTION: This posting is for the Magblock (only) and not for the magazine. We don't currently sell any magazines at all.

Palmetto State Armory AK-103 Magblock Limiter (7.62x39mm)

- This block fits the PSA AK-103 30 round AK47 magazines 7.62x39mm and will convert them to a 10 or 15 round magazine.

- Replaces the lower locking plate for an easy and secure install.

- This block is made from our Universal AK Kit cut to #39 

Tanfoglio Compact Magblock 10 Round Limiter (10mm)

-This Magblock fits the Tanfoglio Compact 10mm 11 round magazines and will limit them to 10 rounds. 

-Easily installed in seconds at the base of the magazine. It is held in place with spring tension alone or can be glued or epoxied if desired.

-Simple install to make 10 round Tanfoglio Compact 10mm Magazines.

-No modification to the magazine is required.

-Lightweight and will not interfere with magazine reliability.

*This block is designed for the Tanfoglio Compact 10mm magazine (ONLY) and will not work on Mec-Gar magazines.