Magblocks

Heckler & Koch UMP Magblock

- Works with H&K UMP 15 rd Magazines as shown.

- This block allows for the use of the factory locking plate

- Simple quick installation.

- With our block it allows for the full power of the spring to be used.

-This block has been tested on the US Made HK UMP .45 15-round magazine.

*ATTENTION: This posting is for the Magblock (only) and not for the magazine. We don't currently sell any magazines at all.

CMMG MK4 - AR-15 5.7x28 10/32 Magblock 10 Round Limiter

- This block will convert 32 round CMMG MK4/AR-15 5.7x28 magazines into a 10 round magazine.

- Easy to install without damage to your magazines. Allows use of factory locking plate and base plate.

 -This block is for CMMG Mk4 (See photos) 5.7x28 magazines in the pictures only. 

*ATTENTION: This posting is for the Magblock (only) and not for the magazine. We don't currently sell any magazines at all.

 Magblock 10 Round Limiter for Heckler & Koch P30SK and VP9SK 9mm

- Fits 12 round 9mm H&K P30SK and VP9SK magazines. 
- Limits the magazine to 10 rounds of 9 mm
- Easy installation on top of the locking plate as shown in the photos.
- New, Improved design.
- Lightweight, efficient design. 

Ruger AR556 450 Bushmaster 2 Round Limiter Magblock 

 This block is for use in RUGER 450 Bushmaster USGI Style magazine made by ASC. These blocks will attach to the lower spring and convert either a 5 or 7 round magazine to hold only 2 for hunting. 

- Only for use in RUGER AR556 450 Bushmaster Magazines manufactured by ASC magazines. Our test magazine was labeled 5-round, but after removing the follower that works as a block, the magazine is a factory 7-round magazine.

5 Round Limiter for AC-Unity AK556 Magblock for 5.45x45mm 10 round magazines

• This AC-Unity AK556 block fits 10 round polymer AC-Unity marked 5.45x45 mm magazines and will convert them to hold only 5 rounds for hunting.

*ATTENTION: This posting is for the Magblock (only) and not for the magazine. We don't currently sell any magazines at all.

Magblock 10 Round Limiter for GFroce GF9 Rapture (9mm) 12 Round Magazines

- Fits 12 round 9mm magazines
- Easy installation at the base of the spring.- Limits the magazine to 10 rounds of 9mm.
- Held in place with spring tension or can be epoxied for a permanent modification. 
- Lightweight, efficient design. - Made of a super strong, heat resistant, fiber reinforced polymer. - Tested on Rapture GF9 magazine. 

SPRINGFIELD SAINT VICTOR 10 & 15 ROUND LIMITER (9MM)

This block will work with 32 round 9mm Springfield Saint Victor magazine made by Metalform to make a 10 or 15 round magazine.

It replaces the lower floor plate.

The spring can also be epoxied to the block which allows for dis-assembly and cleaning, or epoxy the floor plate closed for a more secure modification.

*ATTENTION: This posting is for the Magblock (only) and not for the magazine. We don't currently sell any magazines at all.

CMMG MK4 - AR-15 9mm 10/33 Magblock 10 or 15 Round Limiter

- This block will convert 33 round CMMG MK4/AR-15 9mm magazines into a 10 round magazine.

- Easy to install without damage to your magazines. This block will replace the factory locking plate (see photos).

 -This block is for CMMG Mk4 (See photos) 9mm magazines in the pictures only. 

*ATTENTION: This posting is for the Magblock (only) and not for the magazine. We don't currently sell any magazines at all.

Magblock 10 Round Limiter Girsan Witness2311 17 Round 9mm Magazines

- Fits 17 round 9mm Girsan Witness2311 marked Checkmate 2011 126 mm magazines. 
- Easy installation into the follower of the magazine.
- Limits the magazine to 10 rounds of 9mm. 
- Held in place with spring tension or can be epoxied for a permanent modification. 
- Lightweight, efficient design. 
- Only fits the floor plates shown. May need sanding shorter if your magazines have a floorplate locking plate.

*Note: This block will work in Staccato 126mm-17rd G3 magazines.

*ATTENTION: This posting is for the Magblock (only) and not for the magazine. We don't currently sell any magazines at all.

Taurus TX-22 Toro (.22LR) Magblock 10 Round Limiter for 22 Round Magazine.

- Fits 22 round Taurus TX-22 Toro magazines. 
- Easy installation by replacing the locking plate. See photos.
- Limits the magazine to 10 rounds of .22 
- Held in place with spring tension or can be epoxied for a permanent modification. 
- Lightweight, efficient design. 

*ATTENTION: This posting is for the Magblock (only) and not for the magazine. We don't currently sell any magazines at all.

Walther PDP Pro, Pro-X, Pro-E, Pro-SD Magblock 10 & 15 Round Limiters

- Fits 18 round 9mm Factory Walther PDP magazines w/ a +2 factory extension as shown.
- Tested in Walther PDP Pro Magazines.
- Easy installation at the base of the spring as shown.
- Limits the magazine to 10 rounds of 9mm
- Held in place with spring tension or can be epoxied for a permanent modification.
- Lightweight, efficient design.

*ATTENTION: This posting is for the Magblock (only) and not for the magazine. We don't currently sell any magazines at all.

Ruger LC Carbine  (.45) Magblock

- Fits 13 round .45 caliber Glock 21 and 41 magazines.  *See details on correct follower types below. 
-Will also fit Korean Glock Magazines.  
- Easy installation under the magazine follower.
- Limits the magazine to 10 rounds of .45 caliber ammunition. 
- Held in place with spring tension or can be epoxied for a permanent modification. 
- Lightweight, efficient design. 

* Please click the photos for installation instructions. Fits newer generation full metal lined Glock Magazines.
Only compatible with the follower type shown in the pictures. 

* Uses a cut off Glock Limiter. The end will not end on a rib, so is not as smooth of a cut, but works great. 

* This block will work in the Ruger LC Carbine 13-round magazine made by Glock or SGM chambered in .45 acp.

*ATTENTION: This posting is for the Magblock (only) and not for the magazine. We don't currently sell any magazines at all.

Ruger LC Carbine - SGM Tactical Glock 10mm Magblock 10 and 15 Round Limiter for 30 Round Magazines

- Fits 30 round Ruger LC Carbine / SGM Tactical Glock 10mm magazines manufactured in Korea.  *See details on correct follower types below. 
- Easy installation under the magazine follower.
- Limits the magazine to 10 or 15 rounds of 10mm
- Held in place with spring tension or can be epoxied for a permanent modification. 
- Lightweight, efficient design. 

*ATTENTION: This posting is for the Magblock (only) and not for the magazine. We don't currently sell any magazines at all.

Magblock 10 Round Limiter for Sig P365 .380 auto12 Round Magazines

- Fits 12 round .380 auto Factory Sig P365-380, P365 Luxe AXG, P365-380 Rose magazines. 
- Save time and money with a simple install.
- Easy installation at the base of the spring, with the bottom of the block locking into the base locking plate.
- Limits the magazine to 10 rounds of .380. 
- Held in place with spring tension or can be epoxied for a permanent modification where required to be legal. 
- Lightweight, efficient design. 
- Made of a super strong, heat resistant, fiber reinforced polymer.

- This block is designed for the P365 .380 12-round magazine, and will not work in 9mm P365 magazines

*ATTENTION: This posting is for the Magblock (only) and not for the magazine. We don't currently sell any magazines at all.

*ATTENTION: This posting is for the Magblock (only) and not for the magazine. We don't currently sell any magazines at all.