Sig Sauer Cross PMAG10 ACIS Pattern Magblock (2 or 5 Round Limiter for Hunting)

Fits the Sig Cross Magpul PMAG10 chambered in .308/7.62x51mm, .227 Fury, and 6.5 Creedmoor 10 round Pmags and will convert them to hold only 2 or 5 rounds for hunting. 

- Load magazines on a closed bolt in most rifles.

- Easy to install. New style block allows you to use the stock locking plate.

- No external magazine modifications.

Magpul Part# for magazine: MAG1169-BLK

*This posting is for the magblock (only) and not for the magazine. We don't currently sell any magazines at all.

Maglula UpLula Magazine Loader/Unloader - Fits 223 Rem/556 Nato AR-15 Magazine 

• Eliminates Wear on Feed Lips

• Takes One-Third the Time of Thumb Loading

• Prolongs Magazine Liffe

Magblock Limiter For Bul Armory SASII 2011 140mm 22 Round 9mm Magazines

- Fits 22 round 9mm Factory Bul Armory 140mm SASII magazines. 
- Easy installation at the base of the magazine. (See pictures for details)
- Limits the magazine to 10 rounds of 9mm. 
- Held in place with spring tension or can be epoxied for a permanent modification. 
- Lightweight, efficient design. 
- Only fits the floor plates shown. May need sanding shorter if your magazines have a floorplate locking plate.

*This posting is for the magblock (only) and not for the magazine. We don't currently sell any magazines at all.

Magblock Limiter for Bul Armory SASII 2011 126mm 18 Round 9mm Magazines

- Fits 18 round 9mm Factory Bul Armory SASII Tac+ and Tac Light 126mm magazines. 
- Easy installation at the base of the magazine. (See pictures for details)
- Limits the magazine to 10 rounds of 9mm. 
- Held in place with spring tension or can be epoxied for a permanent modification. 
- Lightweight, efficient design. 
- Only fits the floor plates shown. May need sanding shorter if your magazines have a floorplate locking plate.

*This posting is for the magblock (only) and not for the magazine. We don't currently sell any magazines at all.

 Magblock 10 Round Limiter for Heckler & Koch CC9 9mm

- Fits 12 round 9mm H&K CC9 magazines. 
- Limits the magazine to 10 rounds of 9 mm
- Easy installation on top of the locking plate as shown in the photos.
- New, Improved design.
- Lightweight, efficient design. 

*This posting is for the magblock (only) and not for the magazine. We don't currently sell any magazines at all.

Magblock 10 Round Limiter for Canik METE MC9L, MC9LS, MC9 PRIME 17 Round Magazines

- Fits 17 round 9mm Factory Canik Mete MC9L, MC9LS and MC9 Prime magazines. 
- Easy installation under the follower with the spring keeping it in place.
- Limits the magazine to 10 rounds of 9mm. 
- Held in place with spring tension or can be epoxied for a permanent modification. 
- Lightweight, efficient design. 
- Made of a super strong, heat resistant, fiber reinforced polymer.

-Tested on factory Canik Mete MC9L & MC9LS 17-round magazines.The block may need to be modified to work with magazines from other manufactures.

*This posting is for the magblock (only) and not for the magazine. We don't currently sell any magazines at all.

Taran Tactical +5/6 Extension Glock 17 and Glock 34 (9mm) Magblock

- Fits 23 round 9mm Glock 17 and Glock 34 Magazines.  *See details on correct follower types below. 
- Easy installation under the magazine follower.
- Limits the magazine to 10 rounds of 9mm. 
- Held in place with spring tension or can be epoxied for a permanent modification. 
- Lightweight, efficient design. 

*This posting is for the magblock (only) and not for the magazine. We don't currently sell any magazines at all.

Magblock 10 Round Limiter for STI Staccato CS/C 15 Round 9mm Magazines

- Fits 15 round 9mm Factory Staccato STI CS/C  magazines. 
- Easy installation into the base of the magazine.
- Limits the magazine to 10 rounds of 9mm. 
- Held in place with spring tension or can be epoxied for a permanent modification. 
- Lightweight, efficient design. 

*This posting is for the magblock (only) and not for the magazine. We don't currently sell any magazines at all.

Magblock for Riley Defense RAK-308 M77 .308 20 Round Magazines. 10 and 15 Round Limiters.

Fits Riley Defense RAK308-C .308/7.62x51mm 20 round magazines made by Riley Defense.

- Easy to install in seconds.
- Allows the use of the stock locking plate.
- No external magazine modifications.
- Select 10 or 15 round limiter below. 

- Tested in Riley Defense RAK308-C M77 magazines made by Riley Defense.

*ATTENTION: This posting is for the Magblock (only) and not for the magazine. We don't currently sell any magazines at all.

Mecgar Smith & Wesson 5900 Series Magblock 10/15 (9mm)

This Magblock fits the Mecgar Smith & Wesson 5900 Series 15 round 9mm magazines and will limit them to 10 rounds.  Easily installed in seconds at the base of the magazine, and It is held in place with spring tension alone or can be glued or epoxied if desired.

-Simple install to make 10/15 Mecgar S&W 5900 Series magazines.

-No modification to the magazine is required.

-Lightweight and will not interfere with magazine reliability.

-This block will also work on the Lionheart LH9 15-round magazines.

*This block has been tested on the MecGar Smith and Wesson 5900 series magazines only, and will not work in the factory S&W magazines.

*This posting is for the magblock (only) and not for the magazine. We don't currently sell any magazines at all.

Mossberg MC2C 9mm Compact Magblock 10 Round Limiter for 16 Round Magazine

- Fits 16 round 9mm Mossberg MC2C magazines. 
- Easy installation at the base of the spring.
- Limits the magazine to 10 rounds of 9 mm. 
- Held in place with spring tension or can be epoxied for a permanent modification. 
- Lightweight, efficient design. 

*ATTENTION: This posting is for the Magblock (only) and not for the magazine. We don't currently sell any magazines at all.

MecGar Competiton CZ-75 10 & 15 Round Magblock 

- Fits 19 round 9mm Mec-Gar Competition CZ-75B, SP-01, Shadow 2 magazines
- ***Reported to work with factory 18 round magazines also, may need to be slightly shortened for all 10 rounds in some if these magazines.
- Limits the magazine to 10 rounds of 9mm. 
- Held in place with spring tension or can be epoxied for a permanent modification. 
- Lightweight, efficient design. 

*ATTENTION: This posting is for the Magblock (only) and not for the magazine. We don't currently sell any magazines at all.

Strike Industries Magblock 10/30 for AR15/M16 Magazines

- For use in Strike Industries 33 round magazines for the AR15/M16. 
- These blocks will convert a 33 round magazine to hold only 10 or 15 rounds.

Mecgar Taurus PT92 and PT99 Magblock 10/20 (9mm) 10 & 15 Round Limiter

This Magblock fits the Mecgar branded Taurus PT92 and PT99 20 round 9mm magazines and will limit them to 10 rounds. Easily installed in seconds at the base of the magazine. Save time and money converting your magazines to 10 rounds. It is held in place with spring tension alone or can be glued or epoxied if a permanent modification is needed to be legal.

- Simple install to make 10/20 Mecgar Taurus PT92 and PT99 magazines.
- No modification to the magazine is required.
- Lightweight and will not interfere with magazine reliability.
- Works on Mecgar Taurus PT92/PT99 magazines as shown in the photos. Magazines marked "Made in Italy". Other types of magazines will require modification of the limiter or a different size.

-This block will also work on the Mec-Gar Beretta 92FS/M9 20-round magazine (MecGar Part#:MGPB9220DPS). 

*ATTENTION: This posting is for the Magblock (only) and not for the magazine. We don't currently sell any magazines at all.