Magblocks

MAGBLOCK UNIVERSAL AK LIMITER KIT (Retail 3 Pack)

ALLOWS FOR AN EASY CUSTOM SOLUTION FOR MOST METAL AK TYPE MAGAZINES. REQUIRES CUTTING OF THE MAGBLOCK FOR A CUSTOM FIT. AS SHIPPED IT WILL LIMIT MOST 30 ROUND MAGAZINES TO SLIGHTLY LESS THAN 10 ROUNDS.

Fits most steel 30 round AK47, AK74, AKS, SKS, VZ, and Saiga magazines and will convert them to hold only 10 or 15  rounds. Replaces the flat locking plates at the bottom of the spring. This part must be removed. Tested with Romanian, Russian, Korean, Promag, Saiga, IO, Chinese magazines and more.

- Features a spring catch which will allow an easy attachment point to the spring. This prevents the block making noise and epoxy can be added at this point to make it permanent.
- Pre notched cut outs in the most common lengths for easy cutting.
- Works on many military spec steel AK47 magazines.

Don't forget to check out our new upgrade stainless steel AK springs for polymer and steel magazines here or add below to your order. 

Magblock 10 Round Limiter for Act-Mag - Armscor Smith & Wesson M&P 17 Round Magazines

- Fits 17 round 9mm Act-Mag - Armscor Smith and Wesson M&P magazines. 
- Easy installation at the base of the spring.
- Limits the magazine to 10 rounds of 9mm. 
- Held in place with spring tension or can be epoxied for a permanent modification. 
- Lightweight, efficient design. 
- Made of a super strong, heat resistant polymer.

*This block is designed for the Act-Mag - Armscor S&W M&P 17-round magazines. This block won't work in factory S&W M&P magazines.

*This posting is for the magblock (only) and not for the magazine. We don't currently sell any magazines at all.

Walther PDP Taylor Freelance +3 Extension Magblock 10 Round Limiters

- Fits 18 round 9mm Factory Walther PDP magazines as shown that are using Taylor Freelance +3 Extensions.
- Tested in Walther PDP Magazines w/ Taylor Freelance +3 extension.
- Easy installation under the follower like seen in the photos.
- Limits the magazine to 10 rounds of 9mm
- Held in place with spring tension or can be epoxied for a permanent modification.
- Lightweight, efficient design.

-ATTENTION: Walther has recently changed their locking plate design. So you need to determine which size locking plate you have. An easy way to tell is the new magazines have the blue follower and thin locking plate.

*This block will only work in the newer Walther PDP magazines, shown in the photos.

SEE PICS for example. 

This listing is for Magblocks only, and not for Taylor Freelance +3 Extensions.

*This posting is for the magblock (only) and not for the magazine. We don't currently sell any magazines at all.

Rost Martin RM1C 9mm Magblock 10 Round Limiters

- Fits 17 round 9mm Rost Martin RM1C Magazine
- New design installs at the base of the spring.
- Limits the magazine to 10 rounds of 9mm. 
- Held in place with spring tension or can be epoxied for a permanent modification. 
- Lightweight, efficient design.

*Please click on photos at left for installation instructions. New design installs at the base of the spring and sits on top of the original locking plate.

*This posting is for the magblock (only) and not for the magazine. We don't currently sell any magazines at all.

Rost Martin RM1C - RM1S 9mm Magblock 10 Round Limiters

- Fits 15 round 9mm Rost Martin RM1C Magazine
- New design installs at the base of the spring.
- Limits the magazine to 10 rounds of 9mm. 
- Held in place with spring tension or can be epoxied for a permanent modification. 
- Lightweight, efficient design.

*Please click on photos at left for installation instructions. New design installs at the base of the spring and sits on top of the original locking plate.

 *ATTENTION: This posting is for the Magblock (only) and not for the magazine. We don't currently sell any magazines at all.

ASC USGI 6.5 Grendel, 6mm ARCMagblock 5/10 MCL (Magazine Capacity Limiter)

- For use in ASC USGI 6.5 Grendel & 6mm ARC 10 round magazines. 
- These blocks will convert a 10 round magazine to hold only 5 or 2 rounds.

*ATTENTION: This posting is for the Magblock (only) and not for the magazine. We don't currently sell any magazines at all.

Magblock 10 Round Limiter for STI Staccato CS/C 15 Round 9mm Magazines

- Fits 17 round 9mm Factory Staccato STI CS/C  magazines. 
- Easy installation into the base of the magazine.
- Limits the magazine to 10 rounds of 9mm. 
- Held in place with spring tension or can be epoxied for a permanent modification. 
- Lightweight, efficient design. 

*This posting is for the magblock (only) and not for the magazine. We don't currently sell any magazines at all.

Magblock 10 Round Limiter for STI Staccato CS/C Compact 15 Round 9mm Magazines

- Fits 15 round 9mm Factory Staccato STI CS/C  Compact magazines only and won't fit the newer 15-round full-size CS/C magaiznes. 
- Easy installation into the base of the magazine.
- Limits the magazine to 10 rounds of 9mm. 
- Held in place with spring tension or can be epoxied for a permanent modification. 
- Lightweight, efficient design. 

*This posting is for the magblock (only) and not for the magazine. We don't currently sell any magazines at all.

SAR-9 Magblock 10 Round Limiter For 21 Round Magazine

- Fits 21 round 9mm Factory Sarsilmaz SAR-9, SAR-9 Socom magazines as shown.
- Tested in SAR9 21 round magazine.
- Easy installation under the follower as seen in the photos.
- Limits the magazine to 10 rounds of 9mm
- Held in place with spring tension or can be epoxied for a permanent modification.
- Lightweight, efficient design.

*This posting is for the magblock (only) and not for the magazine. We don't currently sell any magazines at all.

Fits Ohio Ordnance Works H.C.A.R. and BAR .30-06 30 round magazines.

- Easiest and quickest way to make a 10 and 15 round  HCAR and BAR Magazine.

- Can be permanently attached to the spring with epoxy.

- The block attaches to the spring to prevent noise and movement.

- No magazine modifications required.

-Allows loading on a closed bolt with 10 rounds installed.

*This posting is for the magblock (only) and not for the magazine. We don't currently sell any magazines at all.

Beretta 92 Series 170mm Magblock 10/26 (9mm) 10 & 15 Round Limiter

This Magblock fits the factory Beretta 92 Series 170mm 26 round 9mm magazines and will limit them to 10 rounds.  Easily installed in seconds at the base of the spring. The factory locking plate is installed under the block. It is held in place with spring tension alone or can be glued or epoxied if desired.

- Simple install to make 10/26 Beretta 92 Series 170mm magazines.
- No modification to the magazine is required.
- Lightweight and will not interfere with magazine reliability.
- Works on original factory Beretta 92 series 170mm magazines as seen in the photos. Other types of magazines will likely require modification of the limiter. 

*Please click on photos for installation instructions. 

*ATTENTION: This posting is for the Magblock (only) and not for the magazine. We don't currently sell any magazines at all.

Magblock for Valmet M71, M76, M82, M88 - AK-47 (.223) Magazines.

- This block fits the Valmet M71 type 15 round magazines in .223/5.56 and will convert them to a 10 round magazine.

- Replaces the lower locking plate for an easy and secure install.

- This block is designed for the Valmet M71 type 15-round .223/556 magazines only.

*This posting is for the Magblock (only) and not for the magazine. We don't currently sell any magazines at all.

 Duramag 6.8 Remington SPC Magblock (5, 10, and 15 Round Limiter)

• Converts the DURAMAG AR-15 6.8 Remington SPC 20 round magazine to 10 rounds.
• Easy installation 
• Does not affect reliability 
• This block is constucted from our "New" Universal AK magazineblocks cut to #21.5

*This posting is for the magblock (only) and not for the magazine. We don't currently sell any magazines at all.

SIG MCX SPEAR Pmag LR20 Magblock GEN M3 Magazine Capacity Limiters (5, 10, and 15 Round Limiters Available)

Fits the Magpul LR20 .308/7.62x51mm Pmags and will convert them to hold only 5, 10, or 15 rounds. Select desired size below. Easy to install. 

- Will NOT fit older version magazines. Gen M3 Only.

- Dust covers still fit with 10 rounds loaded.

- Load magazines on a closed bolt in most rifles.

- Easy to install.

- No external magazine modifications.

-This block requires you use the factory Magpul locking plate with our block (See picture 1 and 2). 

-The factory Sig Sauer MCX-Spear 7.62x51 comes with the Magpul Gen M3 LR308 20-round magazine. Make sure this is the magazine you're trying to block. This block has only been tested on the magazine in the photos.

*This posting is for the magblock (only) and not for the magazine. We don't currently sell any magazines at all.