Magblocks

KEL-TEC P50 MAGBLOCK 10 & 15 ROUND LIMITER

- New and Improved Easy Install Design.

- This block will fit original 5.7x28mm Kel-Tec P50 Magazines made by Kel-Tec.

- The block replaces the factory locking plate and will convert 50 round magazines to hold only 10 rounds. 

- The block can be epoxied to the spring for a permanent modification.

*PATENT PENDING*

 *ATTENTION: This posting is for the Magblock (only) and not for the magazine. We don't currently sell any magazines at all.

 Magblock 10 Round Limiter for Heckler & Koch VP70 9mm

- Fits 18 round 9mm H&K VP9 magazines. 
- Limits the magazine to 10 rounds of 9 mm
- Easy installation under the follower as shown in the photos.
- Lightweight, efficient design. 

*ATTENTION: This posting is for the Magblock (only) and not for the magazine. We don't currently sell any magazines at all.

Magblock for Bulgarian AK-47 40 Round (7.62x39mm) Magazines.

- This block fits the Bulgarian 40 round magazines in 7.62x39mm and will convert them to a 10 rounds. 

- Replaces the lower locking plate for an easy and secure install.

.

Smith & Wesson CSX 9mm Magblock 10 Round Limiters

- Fits 12 round 9mm CSX magazines. 
- New design installs at the base of the spring.
- Limits the magazine to 10 rounds of 9mm. 
- Held in place with spring tension or can be epoxied for a permanent modification. 
- Lightweight, efficient design. - Tested with factory S&W 12 Round CSX Magazines. 

Ruger PC Carbine, Security-9, Security-9 Pro Magblock Limiter

This Magblock fits the Ruger PC Carbine/Security-9 Full-size 9mm 17 round magazines and will limit them to 10 rounds. 

Easily installed in seconds at the base of the magazine. It is held in place with spring tension alone or can be glued or epoxied if desired.

-Simple install to make 10, 15 or 5 round Ruger PC Carbine/Security-9 Magazines.

-No modification to the magazine is required.

-Lightweight and will not interfere with magazine reliability.

-This block is designed for the Ruger Security-9 Full-size 17rd magazine that is also used in the Ruger PC Carbine. This block won't work in the 15rd Ruger Security-9 magazine.

 *ATTENTION: This posting is for the Magblock (only) and not for the magazine. We don't currently sell any magazines at all.

Magblock 10 Round Limiter for Ruger LCP Max (.380 ) 12 Round Magazines

- Fits 12 round .380 magazines
- Easy installation at the base of the spring.- Limits the magazine to 10 rounds of .380.
- Held in place with spring tension or can be epoxied for a permanent modification. 
- Lightweight, efficient design. - Made of a super strong, heat resistant, fiber reinforced polymer. - Tested on Ruger LCP Max 

Smith & Wesson M&P 2.0 10mm Magblock 10 Round Limiters

- Fits 15 round 10mm M&P magazines. 
- Limits the magazine to 10 rounds of 10mm. 
- Held in place with spring tension or can be epoxied for a permanent modification. 
- Lightweight, efficient design. - Tested with factory S&W Magazines M&P 10mm

-This block will fit standard, 2.0, and Performace Center 15-round 10mm magazines

*Please click on photos at left for installation instructions. New design installs at the base of the spring and sits on top of the original locking plate.

 *ATTENTION: This posting is for the Magblock (only) and not for the magazine. We don't currently sell any magazines at all.

Springfield OSP Elite Compact 10mm 10/11 Magblock

- Fits 11 round OSP Elite 10mm magazines. 
- Easy installation under the magazine follower.
- Limits the magazine to 10 rounds of 9mm. 
- Held in place with spring tension or can be epoxied for a permanent modification. 
- Lightweight, efficient design. 

AREX Rex Zero S1 Magblock 10 Round Limiters 

- Fits 17 round 9mm Factory AREX Rex Zero S1 magazines as shown.
- Tested in AREX Rex Zero S1 17 round magazine.
- Easy installation at the base of the spring as shown.
- Limits the magazine to 10 rounds of 9mm
- Held in place with spring tension or can be epoxied for a permanent modification.
- Lightweight, efficient design.

Note: This block has only been tested with magazine that has the spring bunch at the bottom.

*ATTENTION: This posting is for the Magblock (only) and not for the magazine. We don't currently sell any magazines at all.

Magblock 10 Round Limiter for CZ Scorpion (.32) 20 Round Magazines

- Fits 20 round .32auto CZ Scorpion magazines
- Easy installation at the base of the spring.
- Limits the magazine to 10 rounds of .32auto. 
- Held in place with spring tension or can be epoxied for a permanent modification. 
- Lightweight, efficient design. 
- Made of a super strong, heat resistant, fiber reinforced polymer.

 -This block will only work in the ,32 auto, 20 round magazine.

HERA ARMS H2 Magblock 10/20  (Magazine Capacity Limiter) for AR15/M16 Magazines

- For use in Hera Arms H2 AR-15 type 20 round magazines for the AR15/M16. 
- These blocks will convert a 20 round magazine to hold only 10 rounds.

Mauser MP40 GSG .22LR 10/22 Magblock Limiter

- This block will convert 22 round GSG .22LR magazines into a 10 round magazine.

- Easy to install without damage to your magazines.

-Installs at the base of the magazne. You will not use the stock locking plate with this block.

*ATTENTION: This posting is for the Magblock (only) and not for the magazine. We don't currently sell any magazines at all.

Magblock 10 Round Limiter for Promag Canik TP9 18 Round Magazines (ONLY)

- Fits 18 round 9mm Promag Canik TP9 magazines (This Block Will Not Work In Factory Canik TP9 Magazines). 
- Easy installation at the base of the spring.
- Limits the magazine to 10 rounds of 9mm. 
- Held in place with spring tension or can be epoxied for a permanent modification. 
- Lightweight, efficient design. 
- Made of a super strong, heat resistant, fiber reinforced polymer.

-Tested on Promag (Only) Canik TP9 magazines. The block may need to be modified to work with magazines from other manufactures.

*ATTENTION: This posting is for the Magblock (only) and not for the magazine. We don't currently sell any magazines at all.

Taurus GX4 Magblock 10/13 (9mm) 10 Round Limiter

- This Magblock fits the factory Taurus GX4 13 round 9mm magazines and will limit them to 10 rounds.

- Easily installed in seconds at the base of the magazine. It is held in place with spring tension alone or can be glued or epoxied if desired or required.

- This provides an easy method to convert your factory Taurus GX4 magazines to 10 rounds.

- No external modification to the magazine is required

- Has been tested on original factory magazines.

*ATTENTION: This posting is for the Magblock (only) and not for the magazine. We don't currently sell any magazines at all.