Magblocks

CZ-75 CzechmateTactical Sport 10/26 Magblock 10 Round Limiter for 26 Round factory magazines

This Magblock fits the CZ-75 Czechmate Tactical Sport 26 round magazines will limit them to 10 rounds. Easily installed in seconds at the base of the spring. It is held in place with spring tension alone or can be epoxied if desired.

- Simple install to make 10/26 CZ-75 Czechmate Tactical Sport magazines.

- No external modification to the magazine is required.

- Lightweight and will not interfere with magazine reliability.

Stoeger STR-9 9mm Magblock 10 Round Limiter for 15 Round Magazine

- Fits 15 round 9mm Stoeger STR-9 magazines. 
- Easy installation at the base of the spring.
- Limits the magazine to 10 rounds of 9 mm. 
- Held in place with spring tension or can be epoxied for a permanent modification. 
- Lightweight, efficient design. This is a great way to take your Stoeger STR-9 magazine down to 10-rounds for compliance. 

 *ATTENTION: This posting is for the Magblock (only) and not for the magazine. We don't currently sell any magazines at all.

Mossberg MC2C 9mm Sub-Compact Magblock 10 Round Limiter for 13 Round Magazine

- Fits 13 round 9mm Mossberg MC2C magazines. 
- Easy installation at the base of the spring.
- Limits the magazine to 10 rounds of 9 mm. 
- Held in place with spring tension or can be epoxied for a permanent modification. 
- Lightweight, efficient design. 

Magblock 10 Round Limiter for Sig P365 XMacro 17 Round Magazines

- Fits 17 round 9mm Factory Sig P365XMacro magazines. 
- Save time and money with a simple install.
- Easy installation at the base of the spring.
- Limits the magazine to 10 rounds of 9mm. 
- Held in place with spring tension or can be epoxied for a permanent modification where required to be legal. 
- Lightweight, efficient design. 
- Made of a super strong, heat resistant, fiber reinforced polymer. 

-This block will work in the X-Macro, Tacops, and P365-AXG Legion, Fuse, and XL 17-round magazines.

Springfield XDM Elite 10mm Magblock 10 Round Limiter

• Fits 16 round XDM Elite 10mm magazines. 
• Easy installation under the magazine follower.
• Limits the magazine to 10 rounds of 10mm
• Held in place with spring tension or can be epoxied for a permanent modification. 
• Lightweight, efficient design. 
• NOTE: (Same limiter as the XDM 9mm 10/19, just cut down)

Glock 20, 40 (10 mm) Magblock Michigan Hunting

- Fits 15 round 10 mm Glock 20 magazines.  *See details on correct follower types below. 
- Easy installation under the magazine follower.
- Limits the magazine to 8 rounds of 10mm ammunition for hunting in Michigan. 
- Held in place with spring tension or can be epoxied for a permanent modification. 
- Lightweight, efficient design. 

* Please click the photos for installation instructions. Fits newer generation full metal lined Glock Magazines.
Only compatable with the follower type shown in the pictures. 

-This block is design to limit stock 15 round magazines to 8 rounds for hunting in Michigan.

-This block is a cutdown XD/XDM Springfield block and can be used in Gen3 thru Gen5 Glock 20 magazines, including the orange follower Gen5 magazines. You must choose which Generation Glock 20 magazine you have, as that Gen3 thru 4 use the same block and Gen 5 (orange follower) use a differrent block. The Gen 5 Magblock installs at the base of the magazine.

Glock Pistol Limiter 3 Pack Kit

Save time and money by making your magazines legal. 

- This Glock Magblock fits most magazines from .Glock 17, Glock 34 (Without Cutting), Glock 22, Glock 35, Glock 19, Glock 23, Glock 20, Glock 41, Glock 19x (17rd magazine only).

- Easily installs into the follower (Only for Use in Gen3, Gen4 and Gen5 Magazines) . It is held in place with spring tension alone or can be epoxied if desired.

- No modification to the magazine is required.

- Lightweight and will not interfere with magazine reliability.

Attention: Checkout the discounted items we offer to complete your magblock build.

-We're now offering Glock Factory 10-coil and 11-coil springs at a discount when buying in retail 3-packs. These springs are factory Glock springs and great for rebuilding old magazines or bring new life into your range magazines.

Magblock for Zastava Arms PAP M77 .308 20 Round Magazines.  5, 10 and 15 Round Limiters.

Fits Zastava M77 .308/7.62x51mm 20 round magazines made by Zastava Arms.

- Easy to install in seconds.
- Allows the use of the stock locking plate.
- No external magazine modifications.
- Select 5, 10 or 15 round limiter below. 

- Tested in Zastava Arms M77 PAP magazines made by Zastava. 

Sig Sauer 1911 (.22LR) Magblock 10 Round Limiter 

- Fits 12 round .22 Sig Sauer 1911 magazines. 
- Easy installation. See photos.
- Limits the magazine to 10 rounds of .22 
- Held in place with spring tension or can be epoxied for a permanent modification. 
- Lightweight, efficient design. 

*Please click on photos for installation instructions. 

Glock 26 Magblock 10/12 (9mm)

This Magblock fits the Glock 26 magazines with the +2 extended base. (12 round magazines)  and will limit them to 10 rounds.  

-Simple install to make 10/12 Glock 26 magazines w/ +2 extension.

-No modification to the magazine is required.

-Lightweight and will not interfere with magazine reliability.

PATENT # 9328982 B2, Additional Patents Pending

* Please click the photos for installation instructions. Fits newer generation full metal lined Glock Magazines.
Only compatible with the follower type shown in the pictures. 

Korean AK-74 Magblock for 5.45x39mm 30 round magazines

• This AK-74 block fits Korean 30 round metal 5.45x39 mm magazines and will convert them to hold only 10 rounds. Will only work on magazines with locking plate in picture.
• The new design features a spring catch which will allow an easy attachment point to the spring.
• This prevents the block making noise and epoxy can be added at this point to make it permanent.

PufGun AK-74 Vepr .223 Magblock for 5.45x45mm 30 round magazines

• This AK-74 Vepr block fits 30 round polymer PufGun marked 5.45x45 mm magazines and will convert them to hold only 10 rounds.
• This prevents the block making noise and epoxy can be added at this point to make it permanent.

IMPORTANT:  This block is designed for the AK Vepr .223 marked PufGun magazines only. The block has a special adapter fixed to the bottom of the block,

so that you can use the stock locking plate with no issues. These blocks are designed to fit the PufGun Russian made magazines only.

Sig Sauer P320 X-Ten 10mm Magblock 10 Round Limiters for 15 Round Magazine

- Fits 15 round 10mm Sig P320 X-Ten 10mm magazines. 
- Limits the magazine to 10 rounds of 10mm. 
- Held in place with spring tension or can be epoxied for a permanent modification. 
- Lightweight, efficient design. - Tested with factory Sig Sauer X-Ten 10mm 15 round magazine

*Please click on photos at left for installation instructions. New design installs at the base of the spring and sits on top of the original locking plate.

 This block will for for the new X-Ten Compact and Comp version.

Mossberg MC2C 9mm Compact Magblock 10 Round Limiter for 15 Round Magazine

- Fits 15 round 9mm Mossberg MC2C magazines. 
- Easy installation at the base of the spring.
- Limits the magazine to 10 rounds of 9 mm. 
- Held in place with spring tension or can be epoxied for a permanent modification. 
- Lightweight, efficient design.