Magblocks

Magblock 10 Round Limiter CZ-75 Compact, P-01, PCR, Shadow Compact, Shadow Carry 15 Round Magazines

- Fits 15 round 9mm CZ75 Compact, P-01, PCR, Shadow 2 Compact and Shadow 2 Carry factory magazines
- Easy installation at the base of the spring.
- Limits the magazine to 10 rounds of 9mm. 
- Held in place with spring tension or can be epoxied for a permanent modification. 
- Lightweight, efficient design. 

*If using our Universal Limiter for this magazine: Cut to #8 and glue flush at the bottom for 10/15 limiter. 

*Tested on factory CZ75 Compact 15 round magazine that are marked 11rd .40 on the other side. This block will fit the new Shadow 2 Compact and Carry magazines.

Magblock 10/20 and 15/20 Okay Surefeed USGI MCL (Magazine Capacity Limiter)

- For use in Surefeed Okay Industries 20 round magazines.
- These blocks will convert a 20 round magazine to hold only 10 rounds.

-Note: This block is designed for the OKAY Industries Surefeed 20 round magazine only. It will not work in other USGI 20 round magazines without modification. 

Fits Ohio Ordnance Works Browning BAR .30-06 20 round magazines.

- Easiest and quickest way to make a 10 and 15 round Browning BAR Magazine.

- Can be permanently attached to the spring with epoxy.

- The block attaches to the spring to prevent noise and movement.

- No magazine modifications required.

-Allows loading on a closed bolt with 10 rounds installed.

-New light weight design.

Springfield Hellcat 9mm 10/15 Magblock

- Fits 15 round 9mm Hellcat Compact  magazines. 
- Easy installation under the magazine follower.
- Limits the magazine to 10 rounds of 9mm. 
- Held in place with spring tension or can be epoxied for a permanent modification. 
- Lightweight, efficient design. 

Note: Please verify which number is showing under the follower of your magazine. If the number reads #1, #3 or #4 then you'll need a special cut Hellcat block. If it reads any other number, then you can use the standard cut block.

Armscor/RIA XT-22 Magnum  (.22WMR) Magblock 10 Round Limiter for 14 Round Magazine.

- Fits 14 round Armscor/Rock Island Armory XT-22 magnum magazines. 
- Easy installation by replacing the locking plate. See photos.
- Limits the magazine to 10 rounds of .22 magnum
- Held in place with spring tension or can be epoxied for a permanent modification. 
- Lightweight, efficient design. 

 *ATTENTION: This posting is for the Magblock (only) and not for the magazine. We don't currently sell any magazines at all.

Smith & Wesson M&P Shield Plus, Shield X, and Equalizer 9mm Sub-Compact Magblock 10 Round Limiter

- Fits 13 round 9mm M&P Shield Plus and Shield X magazines. 
- Easy installation at the base of the spring.
- Limits the magazine to 10 rounds of 9 mm. 
- Held in place with spring tension or can be epoxied for a permanent modification. 
- Lightweight, efficient design. 
- See video below for magazine disassembly instructions. 

 -This block is marked 6900. This block is also used for the S&W 6900 series magazine. 

Pmag LR10 Magblock GEN M3 Magazine Capacity Limiters (5 Round for Hunting)

Fits the Magpul LR10 .308/7.62x51mm 10 round Pmags and will convert them to hold only 5 rounds for hunting. 

- Will NOT fit older version magazines. Gen M3 Only.

- Load magazines on a closed bolt in most rifles.

- Easy to install. New style block allows you to use the stock locking plate.

- No external magazine modifications.

GSG-15 .22LR 10/22 Magblock 10 and 15 Round Limiter

- This block will convert 22 round GSG-15 .22LR magazines into a 10 round magazine.

- Easy to install without damage to your magazines.

-Installs at the base of the magazne.

GSG AK-47 .22LR 10/24 Magblock 10 and 15 Round Limiter

- This block will convert 24 round GSG AK-47 .22LR magazines into a 10 or 15 round magazine.

- Easy to install without damage to your magazines.

-Installs at the base of the magazne.

Tanfoglio Stock Master Magblock 10/17 Round and 15/17 Round Limiter for 17 Round Magazines

This Magblock fits the Tanfoglio Stock Master 9mm, 17 round magazines and will limit them to 10 rounds.  Easily installed in seconds at the base of the magazine. It is held in place with spring tension alone or can be glued or epoxied if desired.
-Simple install to make 10 round Tanfoglio Stock Master and  Italia Defiant Stock Magazines.
-No modification to the magazine is required.
-Lightweight and will not interfere with magazine reliability.

"Universal Limiter Instuctions: To make this limiter from a universal cut the base flush with "18" showing in the indicator notch. Cement the base and slide together. Limiters ordered on this listing come Premade to these specifications. 

*This block is designed for the Tanfoglio Stock Master Factory magazine (ONLY), and will not work on Mec-Gar magazines. 

This block fits 20 Round Thompson .45 magazines to limit them to 10 rounds.

The spring can also be epoxied to the block for a permanent installation. A spring catch at the bottom makes installation quick and easy.

Zev Technologies Plus 5 Glock 17 and Glock 34 (9mm) Magblock  10/22

- Fits 22 round 9mm Zev Technologies plus 5 basepad extension for Factory Glock 17 and Glock 34 magazines.  *See details on correct follower types below. 

- Easy installation under the magazine follower.
- Limits the magazine to 10 rounds of 9mm. 
- Held in place with spring tension or can be epoxied for a permanent modification. 
- Lightweight, efficient design. 

* Please click the photos for installation instructions. Fits newer generation full metal lined Glock Magazines.
Only compatible with the follower type shown in the pictures. 

Patent Pending

*This block is intended for the +5 Zev Technologies basepad extensions attached to a factory Glock 17 & Glock 34 magazine, and will limit a 22 round magazinedown to 10 rounds. *See pictures of Zev +5 Extension. 

Beretta M9A3 Magblock 10/17 (9mm) 10 Round Limiter

This Magblock fits the factory Beretta M9A3 17 round 9mm magazines and will limit them to 10 rounds.  Easily installed in seconds at the base of the spring. The factory locking plate is installed under the block. It is held in place with spring tension alone or can be glued or epoxied if desired.

- Simple install to make 10/17 Beretta M9A3 magazines.
- No modification to the magazine is required.
- Lightweight and will not interfere with magazine reliability.
- Works on original factory Beretta M9A3 magazines as seen in the photos. Other types of magazines will likely require modification of the limiter. 

*Please click on photos for installation instructions. 

 *ATTENTION: This posting is for the Magblock (only) and not for the magazine. We don't currently sell any magazines at all.

Lancer L7 5/10 Limiter for 10 round magazines in .308/7.62x51mm.

- This block will replace the lower spring attachment point  or locking plate and convert a 10 round magazine to hold only 5 rounds for hunting.
- Only fits L7 Advanced Warfighter with slide on base as shown.
- Does not affect reliability.
- No increase in spring pressure or wear. 
Note: This is a custom modified Pmag block and will replace the original base.