Magblocks
Magazine Capacity Limiters also known as Magblocks for multiple rifles and pistol magazines.
-
MecGar Para Ordnance P14 .45 Magblock 10/14
Magblock 10 Round Limiter for MecGar Para Ordnance P14 .45 magazines
- Fits 14 round .45 MecGar Para Ordnance P14 magazines.
- Easy installation at the base of the spring.
- Limits the magazine to 10 rounds of .45.
- Held in place with spring tension or can be epoxied for a permanent modification.
- Lightweight, efficient design.
- Made of a super strong, heat resistant, fiber reinforced polymer.*** Tested on MecGar Para Ordnance P14 .45 magazines which use a locking plate at the base. The block may need to be modified to work with magazines from other manufactures or sizes. If your magazines do not have a plastic locking plate that sits on top ot the floor plater then they will not work.
WILL NOT WORK WITH PRO-MAG PARA14 MAGAZINES
$6.59 As low as: $5.95 -
Springfield XDM Elite 10mm 10/16 Magblock (10mm)
Springfield XDM Elite 10mm Magblock 10 Round Limiter
- Fits 16 round XDM Elite 10mm magazines.
- Easy installation under the magazine follower.
- Limits the magazine to 10 rounds of 10mm
- Held in place with spring tension or can be epoxied for a permanent modification.
- Lightweight, efficient design.
- NOTE: (Same limiter as the XDM 9mm 10/19, just cut down)
$6.59 As low as: $5.95 -
FN 502 Magblock 10/15 (.22LR)
FN 502 (.22LR) Magblock 10 Round Limiter for 15 Round Magazine.
- Fits 15 round FN 502 magazines.
- Easy installation and allows you to use the stock locking plate. See photos.
- Limits the magazine to 10 rounds of .22
- Held in place with spring tension or can be epoxied for a permanent modification.
- Lightweight, efficient design.$6.59 As low as: $5.95 -
Sig Sauer MPX 10/35 Magblock (9mm)
Magblock 10 Round Limiter for Sig MPX 9mm 35 Round Magazines
- Fits 35 round 9mm Sig MPX factory magazines.
- Easy installation by inserting the block at the base. This block replaces the factory locking plate.
- Limits the magazine to 10 rounds of 9mm
- Held in place with spring tension or can be epoxied for a permanent modification.
- Lightweight, efficient design.
$7.49 As low as: $5.95 -
Sig Sauer P320 Magblock 10/30 (9mm)
New Magblock 10 Round Limiter for Sig P320 30 Round Magazines
- Fits 30 round 9mm Factory Sig P320 amagazines.
- Easy installation at the base of the spring.
- Limits the magazine to 10 rounds of 9mm.
- Held in place with spring tension or can be epoxied for a permanent modification.
- Lightweight, efficient design.$8.95 As low as: $6.95 -
H&K P713 9mm Magblock 10/13 Magblock
Magblock 10 Round Limiter for Heckler & Koch P7M13 9mm
- Fits 13 round 9mm H&K P7M13 magazines.
- Limits the magazine to 10 rounds of 9 mm
- Easy installation under the follower as shown in the photos.
- Lightweight, efficient design.-This block will work in P7M10 .40S&W marked magazines.
$6.95 -
Walther WMP .22 Magnum 5/15 Magblock (Hunting)
Walther WMP (.22 Magnum) Magblock 5 Round Limiter for 15 Round Magazine For Hunting
- Fits 15 round .22 Walther WMP .22 magazines.
- Easy installation by using the stock locking plate. See photos.
- Limits the magazine to 5 rounds of .22 Magnun.
- Held in place with spring tension or can be epoxied for a permanent modification.
- Lightweight, efficient design.*Please click on photos for installation instructions.
$6.59 As low as: $5.95 -
Kimber Mako R7 Magblock 10/11 (9mm)
Magblock 10 Round Limiter for Kimber Mako R7 (9mm) 11 Round Magazines
- Fits 11 round 9mm magazines
- Easy installation at the base of the spring.- Limits the magazine to 10 rounds of 9mm.
- Held in place with spring tension or can be epoxied for a permanent modification.
- Lightweight, efficient design. - Made of a super strong, heat resistant, fiber reinforced polymer. - Tested on Kimber Mako R7 11 round magazine.$6.59 As low as: $5.95 -
Kimber Mako R7 Magblock 10/13 (9mm)
Magblock 10 Round Limiter for Kimber Mako R7 (9mm) 13 Round Magazines
- Fits 13 round 9mm magazines
- Easy installation at the base of the spring.- Limits the magazine to 10 rounds of 9mm.
- Held in place with spring tension or can be epoxied for a permanent modification.
- Lightweight, efficient design. - Made of a super strong, heat resistant, fiber reinforced polymer. - Tested on Kimber Mako R7 13 round magazine.$6.59 As low as: $5.95 -
Walther WMP .22 Magblock 10/15 (.22WMR)
Walther WMP (.22Magnum) Magblock 10 Round Limiter for 15 Round Magazine
- Fits 15 round .22 Walther WMP .22 magazines.
- Easy installation by using the stock locking plate. See photos.
- Limits the magazine to 10 rounds of .22
- Held in place with spring tension or can be epoxied for a permanent modification.
- Lightweight, efficient design.*Please click on photos for installation instructions.
$6.59 As low as: $5.95 -
Ruger MAX 9 Limiter 10/12 (9mm)
Magblock 10 Round Limiter for Ruger Max 9 (9mm) 12 Round Magazines
- Fits 12 round 9mm magazines
- Easy installation at the base of the spring.- Limits the magazine to 10 rounds of 9mm.
- Held in place with spring tension or can be epoxied for a permanent modification.
- Lightweight, efficient design. - Made of a super strong, heat resistant, fiber reinforced polymer. - Tested on Ruger Max 9.$6.59 As low as: $5.95 -
H&K P30 VP9 Magblock 10 Round Limiter for +5 Extension
Magblock 10 Round Limiter for Heckler & Koch P30 and VP9 9mm 15 round magazine that has a +5 HK store extension
- Fits 15 round to 20 round 9mm H&K P30 and VP9 magazines that has the +5 extension.
- Limits the magazine to 10 rounds of 9 mm
- Easy installation on top of the locking plate as shown in the photos.
- New, Improved design.
- Lightweight, efficient design.$6.59 As low as: $5.95 -
Bul Armory SASII 10/19 Magblock (9mm)
Magblock 10 Round Limiter for Bul Armory SASII 2011 120mm 19 Round 9mm Magazines
- Fits 19 round 9mm Factory Bul Armory SASII 120 mm magazines.
- Easy installation at the base of the magazine. (See pictures for details)
- Limits the magazine to 10 rounds of 9mm.
- Held in place with spring tension or can be epoxied for a permanent modification.
- Lightweight, efficient design.
- Only fits the floor plates shown. May need sanding shorter if your magazines have a floorplate locking plate.$6.59 As low as: $5.95 -
Glock 20, 40 Magblock 8/15 (10mm) (Michigan Hunting)
Glock 20, 40 (10 mm) Magblock Michigan Hunting
- Fits 15 round 10 mm Glock 20 magazines. *See details on correct follower types below.
- Easy installation under the magazine follower.
- Limits the magazine to 8 rounds of 10mm ammunition for hunting in Michigan.
- Held in place with spring tension or can be epoxied for a permanent modification.
- Lightweight, efficient design.* Please click the photos for installation instructions. Fits newer generation full metal lined Glock Magazines.
Only compatable with the follower type shown in the pictures.Patent Pending
-This block is design to limit stock 15 round magazines to 8 rounds for hunting in Michigan.
$6.95 -
Glock Pistol Limiter Kit (RETAIL 3 PACK)
Glock Pistol Limiter 3 Pack Kit
Save time and money by making your magazines legal.
- This Glock Magblock fits most magazines from .Glock 17, Glock 34 (Without Cutting), Glock 22, Glock 35, Glock 19, Glock 23, Glock 20, Glock 41, Glock 19x (17rd magazine only).
- Easily installs into the follower (Only for Use in Gen3, Gen4 and Gen5 Magazines) . It is held in place with spring tension alone or can be epoxied if desired.
- No modification to the magazine is required.
- Lightweight and will not interfere with magazine reliability.
Attention: Checkout the discounted items we offer to complete your magblock build.
$19.95 As low as: $18.95