Magblocks

Magblock 10 Round Limiter for CZ-75 Compact, P-01, and PCR 15 Round Magazines

- Fits 15 round 9mm CZ75 Compact, P-01, and PCR  factory magazines
- Easy installation at the base of the spring.
- Limits the magazine to 10 rounds of 9mm. 
- Held in place with spring tension or can be epoxied for a permanent modification. 
- Lightweight, efficient design. 

*If using our Universal Limiter for this magazine: Cut to #8 and glue flush at the bottom for 10/15 limiter. 

*Tested on factory CZ75 Compact 15 round magazine that are marked 11rd .40 on the other side. This block will fit the new Shadow 2 Compact magazines.

Magblock 10/20 and 15/20 Okay Surefeed USGI MCL (Magazine Capacity Limiter)

- For use in Surefeed Okay Industries 20 round magazines.
- These blocks will convert a 20 round magazine to hold only 10 rounds.

-Note: This block is designed for the OKAY Industries Surefeed 20 round magazine only. It will not work in other USGI 20 round magazines without modification. 

Magblock 10 Round Limiter for CZ-82, CZ-83 (.380 and 9x18) 12 Round Magazines

- Fits 12 round .380, 9x18 CZ-82, CZ-83 magazines
- Easy installation at the base of the spring.- Limits the magazine to 10 rounds of .380 and 9x18.
- Held in place with spring tension or can be epoxied for a permanent modification. 
- Lightweight, efficient design. - Made of a super strong, heat resistant, fiber reinforced polymer. - Tested on CZ55 - CZ-82, CZ-83 factory magazines

Magblock for Rock Island Armory 5 Round Limiter for 9 Round Magazines (12ga)

• Fits Rock Island Armory VR60 9 round magazines and will limit them to 5 rounds. 
• Fits at the base of the magazine. This block will replace the factory locking plate.

Magblock for Panzer Arms MKA1919 AR-12 5 Round Limiter for 10 Round Magazines (12ga)

• Fits Panzer Arms 10 round magazines and will limit them to 5 rounds. 
• Fits at the base of the magazine. This block will replace the factory locking plate.

Magblock 10 & 15 Round Limiter for Palmetto PSA AK-V, AR-V 9mm 35 Round magazine

- This block fits the new Palmetto PSA AK-V and AR-V 9mm magazines and will convert them to hold 10 and 15 rounds.

-Installs at the base and is held in place by spring tension.

- Made of super strong heat resistant polymer.

-This block is compatiable with the Palmetto PSA AK-V U9 35 round magazines.

Springfield Hellcat 9mm 10/15 Magblock

- Fits 15 round 9mm Hellcat Compact  magazines. 
- Easy installation under the magazine follower.
- Limits the magazine to 10 rounds of 9mm. 
- Held in place with spring tension or can be epoxied for a permanent modification. 
- Lightweight, efficient design. 

Note: Please verify which number is showing under the follower of your magazine. If the number reads #4 or #3 then you'll need a special cut Hellcat block. If it reads any other number, then you can use the standard cut block.

Armscor/RIA XT-22 Magnum  (.22WMR) Magblock 10 Round Limiter for 14 Round Magazine.

- Fits 14 round Armscor/Rock Island Armory XT-22 magnum magazines. 
- Easy installation by replacing the locking plate. See photos.
- Limits the magazine to 10 rounds of .22magnum
- Held in place with spring tension or can be epoxied for a permanent modification. 
- Lightweight, efficient design. 

Magblock 10/50 MCL (Magazine Capacity Limiter) for X-Products X-14 HXP 50 round Drum in 7.62x51/.308.

- Magazines can be loaded with the bolt closed.
- Does not affect reliability
- No increase in spring pressure
- Easy to install, see the video. 

Beretta 90-Two Magblock 10/17 (9mm) 10 Round Limiter

This Magblock fits the factory Beretta 90-Two 17 round 9mm magazines and will limit them to 10 rounds.  Easily installed in seconds at the base of the spring. The factory locking plate is installed under the block. It is held in place with spring tension alone or can be glued or epoxied if desired.

- Simple install to make 10/17 Beretta 90-Two magazines.
- No modification to the magazine is required.
- Lightweight and will not interfere with magazine reliability.
- Works on original factory Beretta 90-two magazines as seen in the photos. Other types of magazines will likely require modification of the limiter. 

-Will not work on older Beretta 92 17 round magazines. Will only work on Beretta magazines pictured below.

*Please click on photos for installation instructions. 

*Universal Limiter Instructions: Cut to #18 and glue flush at the bottom for 10/17 limiter. Slide lock is not used. When epoxy cures assemble magazine. The two parts of the universal limiter must be glued flush to prevent the locking plate from causing the limiter to shift sideways. #18 will show in the limiter window notch like in the photos. 

 Attention: Make sure to verify what magazine you have before ordering. The magazine you have should look like the one in the picture. 

Taurus G3 Magblock 10/17 and 15/17 (9mm) 10 and 15 Round Limiter

This Magblock fits the factory Taurus G3 17 round 9mm magazines and will limit them to 10 rounds. Easily installed in seconds at the base of the magazine. It is held in place with spring tension alone or can be glued or epoxied if desired or required. This provides an easy method to convert your factory Taurus G3 magazines to 10 rounds. No external modification to the magazine is required

Has been tested on original factory magazines.

Smith & Wesson M&P Shield Plus, Equalizer 9mm Sub-Compact Magblock 10 Round Limiter

- Fits 13 round 9mm M&P Shield Plus magazines. 
- Easy installation at the base of the spring.
- Limits the magazine to 10 rounds of 9 mm. 
- Held in place with spring tension or can be epoxied for a permanent modification. 
- Lightweight, efficient design. 

Pmag LR10 Magblock GEN M3 Magazine Capacity Limiters (5 Round for Hunting)

Fits the Magpul LR10 .308/7.62x51mm 10 round Pmags and will convert them to hold only 5 rounds for hunting. 

- Will NOT fit older version magazines. Gen M3 Only.

- Load magazines on a closed bolt in most rifles.

- Easy to install. New style block allows you to use the stock locking plate.

- No external magazine modifications.

GSG-15 .22LR 10/22 Magblock 10 and 15 Round Limiter

- This block will convert 22 round GSG-15 .22LR magazines into a 10 round magazine.

- Easy to install without damage to your magazines.

-Installs at the base of the magazne.