Magblocks
Magazine Capacity Limiters also known as Magblocks for multiple rifles and pistol magazines.
-
Promag Canik TP9 Magblock 10/18 (9mm)
Magblock 10 Round Limiter for Promag Canik TP9 18 Round Magazines (ONLY)
- Fits 18 round 9mm Promag Canik TP9 magazines (This Block Will Not Work In Factory Canik TP9 Magazines).
- Easy installation at the base of the spring.
- Limits the magazine to 10 rounds of 9mm.
- Held in place with spring tension or can be epoxied for a permanent modification.
- Lightweight, efficient design.
- Made of a super strong, heat resistant, fiber reinforced polymer.-Tested on Promag (Only) Canik TP9 magazines. The block may need to be modified to work with magazines from other manufactures.
.* Universal limiter can be cut to #20 showing in the notch to make this limiter.
$6.59 As low as: $5.95 -
Beretta M9-22, 92FS-22 & M9A1-22 Magblock 5/15 (.22LR) (5 Round Limter)
Beretta M9-22, 92FS-22, M9A1-22 (.22LR) Magblock 5 Round Limiter New Improved Fit
- Fits 15 round .22 Beretta 92-22 magazines.
- Easy installation by replacing the locking plate. See photos.
- Limits the magazine to 5 rounds of .22 for hunting.
- Held in place with spring tension or can be epoxied for a permanent modification.
- Lightweight, efficient design.*Please click on photos for installation instructions.
$13.95 As low as: $11.95 -
SUREFEED E2 USGI AR15 Magblock 10/30 (5.56)
Okay Industries Surefeed E2 Magblock 10/30 USGI MCL (Magazine Capacity Limiter) for AR15/M16 Magazines
- For use in Surefeed E2 USGI type 30 round magazines for the AR15/M16.
- These blocks will convert a 30 round magazine to hold only 10 rounds.$6.95 As low as: $5.95 -
Grand Power K100 P1 Magblock 10/15 (9mm)
Magblock 10 Round Limiter for Grand Power K100 P1 15 Round Magazines
- Fits 15 round 9mm Factory Grand Power K100 P1 magazines.
- Easy installation at the base of the spring.
- Limits the magazine to 10 rounds of 9mm.
- Held in place with spring tension or can be epoxied for a permanent modification.
- Lightweight, efficient design.
- Made of a super strong, heat resistant, fiber reinforced polymer.-Tested on factory Grand Power K100 P1 magazines.The block may need to be modified to work with magazines from other manufactures.
.* Universal limiter can be cut to #10 showing in the notch to make this limiter.
$6.59 As low as: $5.95 -
Grand Power K100 P1 Magblock 10/20 (9mm)
Magblock 10 Round Limiter for Grand Power K100 20 Round Magazines
- Fits 20 round 9mm Factory Grand Power K100 magazines.
- Easy installation at the base of the spring.
- Limits the magazine to 10 rounds of 9mm.
- Held in place with spring tension or can be epoxied for a permanent modification.
- Lightweight, efficient design.
- Made of a super strong, heat resistant, fiber reinforced polymer.-Tested on factory Grand Power K100 magazines.The block may need to be modified to work with magazines from other manufactures.
.* Universal limiter can be cut to #20 showing in the notch to make this limiter.
$6.59 As low as: $5.95 -
ETS Glock 22 Magblock 10/16 (.40)
ETS Glock 22 (.40) Magblock
- Fits 16 round .40 ETS Glock 22 magazines. *See details on correct follower types below.
- Easy installation under the magazine follower.
- Limits the magazine to 10 rounds of .40 ammunition.
- Held in place with spring tension or can be epoxied for a permanent modification.
- Lightweight, efficient design.ATTENTION: This block is designed for the ETS Glock 22 magazine only.
$6.59 As low as: $5.95 -
ETS Glock 22 10/19 Magblock (.40)
ETS Glock .40 Magblock 10 Round Limiter for 19 round Magazines
This Magblock fits the ETS 19 round .40 magazines for Glocks and will limit them to 10 rounds. Easily installed in seconds at the base of the magazine. It is held in place with spring tension alone or can be glued or epoxied if desired for a permanent modification where required. (Epoxy sold separately).
- Simple install to make 10/19 Glock .40 magazines.
- No modification to the magazine is required.
- Lightweight and will not interfere with magazine reliability.
- Fits ETS magazines like the one pictured.*This block is designed for the ETS Glock .40 19 round magazine only. If used in other magazines it might need to be modified.
$6.59 As low as: $5.95 -
H&K UMP Magblock 10/30 (9mm)
Heckler & Koch UMP 9mm Magblock 10/30
- Works with H&K UMP 9mm 30 rd Magazines as shown.
-Uses the factory locking plate.
- Simple quick installation.
-Tested on USA made UMP 9mm 30 round magazines.
$7.49 As low as: $6.49 -
Sig Sauer 2022 SigPro Magblock 10/17 (9mm)
Magblock 10 Round Limiter for Sig Sauer 2022 SigPro 9mm 17 Round Magazines. Fits 2022 and 2009
- Fits 17 round 9mm Factory Sig Pro magazines.
- Easy installation under the magazine follower.
- Limits the magazine to 10 rounds of 9mm.
- Held in place with spring tension or can be epoxied for a permanent modification.
- Lightweight, efficient design.
The Universal limiter can be used to make this block by cutting flush with the base with #20 showing in the indicator notch. The blocks sold here are pre-cut and fixed at this length.$6.59 As low as: $5.95 -
Sarsilmaz SAR-9 Magblock 10/17 (9mm)
SAR-9 Magblock 10 Round Limiters
- Fits 17 round 9mm Factory Sarsilmaz SAR-9 magazines as shown.
- Tested in SAR9 17 round magazine.
- Easy installation at the base of the spring as shown.
- Limits the magazine to 10 rounds of 9mm
- Held in place with spring tension or can be epoxied for a permanent modification.
- Lightweight, efficient design.Universal Limiter Instructions: To make this limiter out of the Universal just cut flush at the base with number 14 shown in the indicator notch. Cement together after testing fit.
$6.59 As low as: $5.95 -
Sale
H&K USP 9mm Tactical 10/31 Magblock (9mm)
Magblock 10 Round Limiter for Heckler & Koch USP 9mm Tactical
- Fits 31 round 9mm H&K USP9 Tactical magazines.
- Limits the magazinbe to 10 rounds of 9 mm
- Easy installation on top of the locking plate as shown in the photos.
- New, Improved design.
- Lightweight, efficient design.Regular Price: $12.95
Special Price $9.95
-
S&W SW99 Magblock 10/16 (9mm)
Smith & Wesson SW99 9mm Magblock 10 Round Limiters
- Fits 16 round 9mm SW99 magazines.
- New design installs at the base of the spring.
- Limits the magazine to 10 rounds of 9mm.
- Held in place with spring tension or can be epoxied for a permanent modification.
- Lightweight, efficient design. - Tested with factory S&W SW99 16 Round Magazines.*Universal Pistol Limiter Instructions: Cut to #16 and glue flush at the bottom for 10/16 limiter. Slide lock is not used. When epoxy cures assemble magazine. The two parts of the universal limiter must be glued flush to prevent the locking plate from causing the limiter to shift sideways. #16 will show in the limiter window notch like in the photos.
$6.50 As low as: $5.95 -
Taurus PT1911 Magblock 5 Round Limiter (Hunting)
Taurus PT1911 Magblock 5/8 (.45) 5 Round Limiter for Hunting
This Magblock fits the factory Taurus PT1911 8 round .45acp magazines and will limit them to 5 rounds for hunting. Easily installed in seconds at the base of the magazine. It is held in place with spring tension alone or can be glued or epoxied if desired.
- Simple install to make 5/8 Taurus PT1911 magazines.
- No modification to the magazine is required.
- Lightweight and will not interfere with magazine reliability.
- Works on original factory Taurus PT1911 magazines as shown in the photos. Other types of magazines may require modification of the limiter.Please click on photos for installation instructions.
$6.59 As low as: $5.95 -
IWI MASADA Magblock 10/17 (9mm)
IWI MASADA Magblock 10 Round Limiter
- Fits 17 round 9 mm Made in Italy IWI MASADA magazines.
- Easy installation at the base of the magazine.
- Limits the magazine to 10 rounds of 9 mm.
- Held in place with spring tension or can be epoxied for a permanent modification.
- Lightweight, efficient design.$6.50 As low as: $5.95 -
ProMag Cobray M-11 Magblock Limiter 10/32
This block will work with 32 round 9mm ProMag Cobray M-11 magazines to make a 10 round magazine. The spring can also be epoxied to the block which allows for dis-assembly and cleaning, or epoxy the floor plate closed for a more secure modification.
Block installs at the base and allows you to use the factory locking plate.
$6.95 As low as: $5.95