Magblocks
Magazine Capacity Limiters also known as Magblocks for multiple rifles and pistol magazines.
-
Black Ace Tactical Bull-Pup 2/5 Magblock (12ga)
Magblock for Black Ace Tactical 2 Round Limiter for 5 Round Magazines (12ga)
- Fits Black Ace Tactical 5 round magazines and will limit them to 2 rounds.
- Fits at the base of the magazine. This allows you to use the factory locking plate.
$6.95 -
CZ-55, CZ-82, CZ-83 Magblock 10/12 (.380)
Magblock 10 Round Limiter for CZ-82, CZ-83 (.380 and 9x18) 12 Round Magazines
- Fits 12 round .380, 9x18 CZ-82, CZ-83 magazines
- Easy installation at the base of the spring.- Limits the magazine to 10 rounds of .380 and 9x18.
- Held in place with spring tension or can be epoxied for a permanent modification.
- Lightweight, efficient design. - Made of a super strong, heat resistant, fiber reinforced polymer. - Tested on CZ55 - CZ-82, CZ-83 factory magazines$6.59 As low as: $5.95 -
Rock Island Armory VR60 Magblock 5/9 (12ga)
Magblock for Rock Island Armory 5 Round Limiter for 9 Round Magazines (12ga)
- Fits Rock Island Armory VR60 9 round magazines and will limit them to 5 rounds.
- Fits at the base of the magazine. This block will replace the factory locking plate.
$7.95 As low as: $4.50 -
Panzer Arms MKA1919 AR-12 Magblock 5/10 (12ga)
Magblock for Panzer Arms MKA1919 AR-12 5 Round Limiter for 10 Round Magazines (12ga)
- Fits Panzer Arms 10 round magazines and will limit them to 5 rounds.
- Fits at the base of the magazine. This block will replace the factory locking plate.
$6.95 -
Palmetto PSA AK-V, AR-V Magblock 10/35 (9mm)
Magblock 10 & 15 Round Limiter for Palmetto PSA AK-V, AR-V 9mm 35 Round magazine
- This block fits the new Palmetto PSA AK-V and AR-V 9mm magazines and will convert them to hold 10 and 15 rounds.
-Installs at the base and is held in place by spring tension.
- Made of super strong heat resistant polymer.
-This block is compatiable with the Palmetto PSA AK-V U9 35 round magazines.
$7.49 As low as: $5.95 -
H&K G36 10/30 Magblock (5.56x45)
Heckler & Koch G36 Magblock
- Works with Factory Magazines for the HK G36 only.
- 10/30 and 15/30 configuration (10 rounds in a 30 round body)
- Simple quick install.
$6.50 As low as: $5.95 -
Smith & Wesson 5900 Series Magblock 10/14 (9mm)
Smith & Wesson 5900 Series Magblock 10/14 (9mm)
This Magblock fits the Smith & Wesson 5900 Series 14 round 9mm magazines and will limit them to 10 rounds. Easily installed in seconds under the magazine follower. It is held in place with spring tension alone or can be glued or epoxied if desired.
-Simple install to make 10/15 S&W 5900 Series magazines.
-No modification to the magazine is required.
-Lightweight and will not interfere with magazine reliability.
-Block is designed for the 14 round, black follower, early version, 659 series magazines.
$6.59 As low as: $5.95 -
Eagle Imports SPS 10/21 Magblock (9mm)
Magblock 10 Round Limiter for Eagle Import SPS 21 Round 9mm/.38 Magazines
- Fits 21 round 9mm/38super Factory Eagle Import SPS magazines.
- Easy installation into the follower.
- Limits the magazine to 10 rounds of 9mm/38super.
- Held in place with spring tension or can be epoxied for a permanent modification.
- Lightweight, efficient design.
- Only fits the floor plates shown. May need sanding shorter if your magazines have a floorplate locking plate.$6.95 As low as: $5.95 -
Steyr SPP 10/30 Magblock (9mm)
Magblock 10 and 15 Round Limiter for Steyr SPP 30 Round Magazines
- Fits 30 round 9mm Steyr SPP factory magazines
- Easy installation at the base of the spring.
- Limits the magazine to 10 rounds of 9mm.
- Held in place with spring tension or can be epoxied for a permanent modification.
- Lightweight, efficient design.$6.95 As low as: $5.95 -
Steyr L9-A2 MF Magblock 10/17 (9mm)
Magblock 10 and 15 Round Limiter for Steyr L9-A2 17 Round Magazines
- Fits 17 round 9mm Steyr A2-MF factory magazines
- Easy installation at the base of the spring.
- Limits the magazine to 10 rounds of 9mm.
- Held in place with spring tension or can be epoxied for a permanent modification.
- Lightweight, efficient design.*If using our Universal Limiter for this magazine: Cut to #17 and glue flush at the bottom for 10/17 limiter. Slide lock is not used.
$6.59 As low as: $5.95 -
OKAY Surefeed USGI 10/20 MagBlock (5.56)
Magblock 10/20 and 15/20 Okay Surefeed USGI MCL (Magazine Capacity Limiter)
- For use in Surefeed Okay Industries 20 round magazines.
- These blocks will convert a 20 round magazine to hold only 10 rounds.-Note: This block is designed for the OKAY Industries Surefeed 20 round magazine only. It will not work in other USGI 20 round magazines without modification.
$6.95 As low as: $5.95 -
CZ-75 Compact, P-01, PCR, Shadow 2 Compact Magblock 10/15 (9mm)
Magblock 10 Round Limiter for CZ-75 Compact, P-01, and PCR 15 Round Magazines
- Fits 15 round 9mm CZ75 Compact, P-01, and PCR factory magazines
- Easy installation at the base of the spring.
- Limits the magazine to 10 rounds of 9mm.
- Held in place with spring tension or can be epoxied for a permanent modification.
- Lightweight, efficient design.*If using our Universal Limiter for this magazine: Cut to #8 and glue flush at the bottom for 10/15 limiter.
*Tested on factory CZ75 Compact 15 round magazine that are marked 11rd .40 on the other side. This block will fit the new Shadow 2 Compact magazines.
$6.59 As low as: $5.95 -
Ruger BX-15 Hunting Magblock 5/15 (.22WMR & 17HMR) (Hunting)
Ruger BX-15 Magblock 5 Round Limiters for .22WMR & .17HMR for hunting.
- Fits 15 round .22WMR & .17HMR Ruger BX15 magazines.
- Easy installation.
- Limits the magazine to 5 rounds of .22WMR & .17HMR
- Held in place with spring tension or can be epoxied for a permanent modification.
- Lightweight, efficient design.$6.59 As low as: $5.95 -
THERMOLD Mini 30 Ruger Magblock 10/26
Thermold Mini 30 Magblock 10/26 Magazine Capacity Limiter
This block is for use in Thermold 26 round Mini 30 magazines. These blocks will insert at the base of the magazine spring and convert a 26 round magazine to hold only 10 rounds.
- Only for use in Thermold manufactured magazines.
- Designed to work in the polymer magazine only.
$6.95 As low as: $5.95 -
HEXMAG AR-10, SR25 5/20 Magblock (Hunting)
Hexmag AR-10/SR25 Magblock 5/20
- Magblock 5/20 MCL block for use in polymer Hexmag AR-10/SR25 magazines.
- This block will convert a 7.62x51/.308 20 round magazine to hold only 5 rounds.
- Uses the original Hexmag locking plates.
$6.95 As low as: $5.95