Products

M+M INDUSTRIES AK-47 10/30 Magblock Limiter

This block fits the M+M Industries 30 round AK47 magazines and will convert them to a 10 or 15 round magazine.

-Replaces the lower locking plate.

-Works on M+M Industries 7.62x39mm AK magazines shown in the photos.

Note: This block is made from our Universal AK Kits cut to #38 using a square locking plate.

5 Round Limiter for SR-25 Mod2 10 Round Amend2 Magazines

Magblock (Magazine Capacity Limiter) for Amend2 10 round in .308/7.62x51. 

- This block will replace the lower spring attachment point  or locking plate and convert a 10 round magazine to hold only 5 rounds.

- Does not affect reliability.

- No increase in spring pressure. 

-Note: You will use the factory locking plate/retaining plate with our magblock. See photos for details.

WILSON COMBAT AR-15 (5.56x45) 10 and 15 Round Magblock Limiter

This block fits the Wilson Combat AR-15 30 round 5.56x45 magazines and will convert them to a 10 or 15 round magazine.

-This block is designed to use the factory retaining plate with our block.

-Works on Wilson Combat 30 round AR-15  5.56x45 magazine shown in the photos.

Note: This block is made from a cut down Gen2 PMag block.

*ATTENTION: This posting is for the Magblock (only) and not for the magazine. We don't currently sell any magazines at all.

JTS Group M12AK 2 Round Limiter for 5 Round Magazines (12ga)

• Fits JTS Group M12AK 5 round magazines and will limit them to 2 rounds
• Fits at the base of the magazine
• This allows you to use the factory locking plate
• Magblock for the JTS M12AK and M12AK-T1 5-round magazine

*ATTENTION: This posting is for the Magblock (only) and not for the magazine. We don't currently sell any magazines at all.

Century Arms AP51 and AP53 Translucent Polymer Magblock 

- For use in the Century Arms AP51 and AP53 Translucent Polymer 20 round magazines (Like in the Photos)

- These blocks will convert a 20 round Century Arms AP51 and AP53 Translucent Polymer magazine to hold only 10 or 15 rounds.

- NOTE: For use only in Century Arms AP51, AP53 Translucent Polymer manufactured magazines. You will use the factory retaining plate with this block to work.

*ATTENTION: This posting is for the Magblock (only) and not for the magazine. We don't currently sell any magazines at all.

Century Arms MKE HK 93, 53 and 33 Translucent Polymer Magblock 

- For use in the Century Arms MKE HK 93, 53 and 33 Translucent Polymer 30 round magazines (Like in the Photos)

- These blocks will convert a 30 round Century Arms MKE HK 93, 53, 33 Translucent Polymer magazine to hold only 10 or 15 rounds.

- NOTE: For use only in Century Arms MKE HK Translucent Polymer manufactured magazines. You will not use the factory retaining plate with this block to work this block will replace the factory retaining plate.

-Note: You will have to pull the end of the spring out just a little bit to allow for the block to be inserted into the spring. This can be done with a pair of pliers or a screwdriver.

*ATTENTION: This posting is for the Magblock (only) and not for the magazine. We don't currently sell any magazines at all.

USPS EXPRESS PRIORITY SHIPPING  Add On Charge (1 - 2 Business Day)

Priority Mail Express is the fastest domestic service offered by USPS, providing 1–3 day delivery (typically 1–2 days) for most U.S. addresses and PO Boxes™. It offers guaranteed overnight to 2-day delivery by 6 PM, with a money-back guarantee if it arrives late.

- This add on charge doesn't include the intial shipping charge and acts as an upgrade to your standard shipping rate.

- Shipping time doesn't include processing time. If you are in a major rush and need this order processed right away, please contact us via email or through our text message line. 

- If you place an order late Friday or on the weekend, your order won't be processed until the next business day, excluding national holidays, as USPS is closed then.

TruGlo Mag-Wrench Glock Magazine Take-down Tool

- For removing Glock factory magazine base plates

- Easily change base plates and replace springs

- Made from machined aircraft aluminum 

- Makes breaking down your factory Glock magazines much easier

Magpul Industries Magazine Coupler (Fits PMAG and GEN M3)

- Fits 5.56x45 PMAG 30 and 40 round AR/M4 GEN M2 MOE and AR/M4 GEN M3 magazines

- Two-piece bolt-on design

- Impact resistant polymer

Magazineblock "RESIST" Trucker Snap-Back Hat

- Snap-Back design perfect for all head sizes

- Trucker style is perfect for spring, summer and fall time wheather

- Great to show off your "Resist" pride 

- Offering in Black with red logo and FDE base with OD green front

Springfield XDM-XD Pistol Limiter 3 Pack Kit

Save time and money by making your magazines legal. 

- This Springfield XDM-XD Magblock fits most magazines from Springfield XDM series and XD series in 9mm, .40, .45 up to 19- round capacity magazines.

- Easily installs into the follower (For Factory Springfield XDM-XD Magazines Only). It is held in place with spring tension alone or can be epoxied if desired.

- No modification to the magazine is required.

- Lightweight and will not interfere with magazine reliability.

-Now offering Hellcat and Hellcat Pro Cut Blocks (Choose 1 or up to 3) to be cut to fit Hellcat 11, 13, 15 or 17 round magazines. If you choose only 1 then all 3 will be cut to that lenght. 

-If you have a Hellcat/Hellcat Pro with different capacity magazines you can now let us know and we will send the 3-pack cut to size and ready to go for the Hellcat-Hellcat Pro magazines. 

M&P 22X Magblock 10 and 15 Round Limiter 

- This block will convert 20 round M&P 22X magazines into a 10 or 15 round magazine.

- Easy to install without damage to your magazines.

- You will have to use your factory retaining plate with our block.

- This block is a cut down version of the M&P15 .22 10/25 magblock and will be marked 10/25.

*ATTENTION: This posting is for the Magblock (only) and not for the magazine. We don't currently sell any magazines at all.

AMEND2 SCAR 17 MAGBLOCK  

- New and Improved Easy Install Design.

- This block will fit the Amend2 (Only) 7.62x51mm NATO/.308 for the SCAR 17 Magazines made by Amend2.

- The block installs at the bottom of the magazine spring and will convert 20 round magazines to hold only 10 rounds.

- No modifications to your Amend2 SCAR 17 polymer magazines are needed to install.

- The block can be epoxied to the spring for a permanent modification.

- This block is designed and tested for the Amend2 SCAR 17 magazine only and won't work in factory FN SCAR 17 magazines.

*ATTENTION: This posting is for the Magblock (only) and not for the magazine. We don't currently sell any magazines at all.

SDS Imports AR-15 Polymer 10/30 Magblock 

- For use in the SDS Imports AR-15 Polymer 30 round magazines (Like in the Photos)

- These blocks will convert a 30 round SDS Imports AR-15 Polymer magazine to hold only 10 or 15 rounds.

- NOTE: For use only in SDS Imports AR-15 Polymer manufactured factory magazines. You will use the factory retaining plate with this block to work.

*ATTENTION: This posting is for the Magblock (only) and not for the magazine. We don't currently sell any magazines at all.