Products
-
HEXMAG AR-10, SR25 10/20 Magblock (.308)
Hexmag AR-10/SR25 Magblock 10/20
- Magblock 10/20 MCL block for use in polymer Hexmag AR-10/SR25 magazines.
- This block will convert a 7.62x51/.308 20 round magazine to hold only 10 rounds.
- Uses the original Hexmag locking plates.
$6.50 As low as: $5.50 -
Lancer L7 10/25 Magblock (.308)
Lancer L7 10/25 Limiter for 25 round magazines in .308/7.62x51mm.
- This block will replace the lower spring attachment point or locking plate and convert a 25 round magazine to hold only 10 rounds.
- Only fits L7 Advanced Warfighter with slide on base as shown.
- Does not affect reliability.
- No increase in spring pressure or wear.
Note: This is a custom modified Pmag block and will replace the original base.$6.95 As low as: $5.95 -
Daniel Defense AR-15 Magblock (5.56)
Magblock 10/32 MCL (Magazine Capacity Limiter) for Daniel Defense 32 round magazines in .223/5.56mm.
- Magazines can be loaded with the bolt closed.
- Does not affect reliability.
- No increase in spring pressure.
- Check out are Youtube Install video:
* You will have to use the Factory Daniel Defense Retaining plate with our block. You insert the block with the Daniel Defense retaining plate sitting under the block and then put the magazine back together.
$6.50 As low as: $4.95 -
PMAG 35 EV9 CZ Scorpion Evo, DD PCC Magblock 10/35 (9mm)
Magblock 10 Round Limiter for Magpul PMAG 35 CZ Scorpion Evo 3 (9mm) 35 Round Magazines
- Fits 35 round 9mm Magpul PMAG 35 CZ Scorpion Evo and Daniel Defense PCC magazines
- Easy installation at the base of the spring on top of the original locking plate so you wont loose your original.
- Limits the magazine to 10 rounds of 9mm.
- Lightweight, efficient design.
- Made of a strong, heat resistant, polymer.- The new Daniel Defense PCC 9mm is being issued with the Magpul PMAG CZ Evo 35-round magazine.
$6.95 As low as: $5.95 -
Amend2, ATI, Black Rain Ord AR-15 Magblock 10/30 (5.56)
10 Round Limiter for Mod2 30 Round Amend2 Magazines
Magblock 10/30 MCL (Magazine Capacity Limiter) for Amend2 30 round in .223/5.56mm and .300 Blackout.
- This block will replace the lower spring attachment point or locking plate and convert a 30 round magazine to hold only 10 rounds.
- Does not affect reliability.
- No increase in spring pressure.
-A custom made adaptor allowes for use of the stock floor plate.
-This block will also fit the ATI AR15 30-round polymer magazine along with the Black Rain Ordnance Official Polymer magazine. (See photos of Magazines that these will work in.)
*ATTENTION: This posting is for the Magblock (only) and not for the magazine. We don't currently sell any magazines at all.
$6.95 As low as: $5.95 -
ETS AR15 MCL .223/.556 10/30 Limiter
Magblock 10/30 for ETS (Elite Tactical System)
- For use in ETS type 30 round magazines for the AR15.
- These blocks will convert a 30 round magazine to hold only 10 rounds.$6.59 As low as: $5.95 -
CZ Scorpion Evo PGS Hybrid Magblock 10/32 (9mm)
Magblock 10 Round Limiter for CZ Scorpion Evo PGS Hybrid (9mm) 32 Round Magazines
- Fits 32 round 9mm CZ Scorpion Evo PGS Hybrid magazines
- Easy installation at the base of the spring.
- Limits the magazine to 10 rounds of 9mm.
- Held in place with spring tension or can be epoxied for a permanent modification.
- Lightweight, efficient design.
- Made of a super strong, heat resistant, fiber reinforced polymer.*ATTENTION: This posting is for the Magblock (only) and not for the magazine. We don't currently sell any magazines at all.
$6.95 As low as: $5.95 -
Magblock Upgrade 30 Round AK-47 Replacement Spring for Polymer Magazines
- Replacement upgrade stainless steel springs.
- Uses highest quality 17-7 Stainless Steel to prevent tension loss.
- Fits all Polymer AK-47 magazines including Pmag, Tapco, Promag, Circle10, Bakelite, Arsenal, etc.
- Exceeds military specs
- Guaranteed not to lose tension!
- Great to use with Magblock Limiters also.
- Order our 24 coil for use in mil spec metal AK mags.
Replacement upgrade 30 round spring for use in AK magazines including Pmags, Tapco, Promag, Circle10, Bakelite, Arsenal. Use along with our 10 round blocks for an upgrade or save your original springs. Uses the highest quality 17-7 Stainless spring steel which has the best properties for magazine spring use. Most companies don't use this quality steel due to the added cost, but if you want the best it will cost a little more. These 30rd AK47 magazine spring holds up in the harshest condition and won't loose tension over time even if maintained fully loaded. We guarantee spring will not be damaged from long term storage of fully loaded magazines!
These springs use 17-7 PH is a precipitation-hardened stainless steel that is well suited for aerospace and other applications requiring high strength and good corrosion resistance and formability. Type 17-7PH is a Chromium-Nickel-Aluminum, austenitic stainless steel. It is the most formable of all PH grades and has the highest strength and hardness. It is less magnetic than other PH grades and offers minimal distortion upon heat treatment. This material maintains its valuable properties at temperatures up to 800 F.
$6.99 -
Magblock Upgrade 30 Round AK-47 Military Surplus Replacement Spring
- Replacement upgrade stainless steel springs.
- Uses highest quality 17-7 Stainless Steel to prevent tension loss.
- Fits all AK-47 military surplus magazines.
- Exceeds military specs
- Guaranteed not to lose tension!
- Great to use with Magblock Limiters also.
Replacement upgrade 30 round spring for use in AK military surplus magazines. Use along with our 10 round blocks for an upgrade or save your original springs. Uses the highest quality 17-7 Stainless spring steel which has the best properties for magazine spring use. Most companies don't use this quality steel due to the added cost, but if you want the best it will cost a little more. These 30rd AK47 magazine spring holds up in the harshest condition and won't loose tension over time even if maintained fully loaded. We guarantee spring will not be damaged from long term storage of fully loaded magazines!
These springs use 17-7 PH is a precipitation-hardened stainless steel that is well suited for aerospace and other applications requiring high strength and good corrosion resistance and formability. Type 17-7PH is a Chromium-Nickel-Aluminum, austenitic stainless steel. It is the most formable of all PH grades and has the highest strength and hardness. It is less magnetic than other PH grades and offers minimal distortion upon heat treatment. This material maintains its valuable properties at temperatures up to 800 deg; F
$6.99 -
H&K UMP Magblock 10/30 (9mm)
Heckler & Koch UMP 9mm Magblock 10/30
- Works with H&K UMP 9mm 30 rd Magazines as shown.
-Uses the factory locking plate.
- Simple quick installation.
-Tested on USA made UMP 9mm 30 round magazines.
$7.49 As low as: $6.49 -
Beretta ARX160 10/30 Magblock (.22)
Beretta ARX160 22LR 10/30 Magblock 10 Round Limiter
- This block will convert 30 round Beretta ARX160 22LR magazines into a 10 round magazine.
- Easy to install without damage to your magazines.
*ATTENTION: This posting is for the Magblock (only) and not for the magazine. We don't currently sell any magazines at all.
$6.49 As low as: $4.95 -
DURAMAG & SIG MCX SPEAR Magblock 10/20 (7.62x39)
- New Design
- Converts the updated DURAMAG AR-15 7.62x39 20 round magazine to 10 rounds.
- Easy installation
- Does not affect reliability
$7.49 As low as: $5.95 -
DURAMAG AR 6.5 Grendel 10/20 Magblock
Duramag 6.5 Grendel 10/20 Round Magblock
- Converts the DURAMAG AR-15 6.5 Grendel 20 round magazine to 10 rounds.
- Easy installation
- Does not affect reliability
- This block is constucted from our "New" Universal AK magazineblocks cut to #20.5
$7.49 As low as: $5.95 -
Magpul D60 10/60 Magblock (5.56)
Magblock 10/60 MCL (Magazine Capacity Limiter) for Magpul 60 round D60 Drum in .223/5.56mm.
- Magazines can be loaded with the bolt closed.
- Does not affect reliability.
- No increase in spring pressure.
- Easy to install. See the video for instructions.$14.95 -
Ruger Mini 14 Magblock 10/30
Mini 14 Magblock 10/30 MCL (Magazine Capacity Limiter for Ruger Magazines
This block is for use in RUGER 30 round Mini 14 magazines. These blocks will attach to the lower spring and convert a 30 round magazine to hold only 10 rounds.
- Only for use in RUGER manufactured magazines.
- This is a modified USGI magblock.
$6.95 As low as: $5.95
