Products
-
Sale
GEN M3 Pmag MCL 15/30 Block (15 Round Limiter)
15 Round Limiter for Gen M3 30 Round Pmags
Magblock 15/30 MCL (Magazine Capacity Limiter) for Magpul 30 round Gen M3 Pmags in .223/5.56mm.
- This block will replace the lower spring attachment point or locking plate and convert a 30 round magazine to hold only 15 rounds.
- The Pmag dust covers will still fit when loaded.
- Magazines can be loaded with the bolt closed on many rifles.
- Does not affect reliability.
- No increase in spring pressure.
- Compatable with new Magpul Gen 3 Pmags only. These will not work in original Pmags.
-
AR-9 mm 10/20 Block
Converts 9mm AR-15 20 round magazine to 10 rounds.
- This block will work with 9mm 20 round AR-15 magazines.
- Marked where to cut for a 15 round block.
- It replaces the lower magazine locking plate.
- The spring can also be epoxied to the block which allows for disassembly.
$6.95 As low as: $5.95 -
Sale
Troy BattleMag 15/30 Magblock
Troy BattleMag 15/30 MCL (Magazine Capacity Limiter) for 30 round Troy BattleMags in .223/5.56mm.
- This block will sit on top of the Troy locking plate and convert a 30 round magazine to hold only 15 rounds.
- The optional shock absorbing floor plate will still function normally.
- Does not affect reliability.
- No increase in spring pressure or wear.
(Note: This is a custom trimmed Pmag block)
-
H&K416 22LR 10/30 Magblock
HK416 22LR 10/30 Magblock 10 Round Limiter
- This block will convert 30 round HK 416 22LR magazines into a 10 round magazine.
- Easy to install without damage to your magazines.
$6.95 As low as: $5.49 -
Ruger Mini 14 Magblock 10/20
Mini 14 Magblock 10/20 MCL (Magazine Capacity Limiter for Ruger Magazines
This block is for use in RUGER 20 round Mini 14 magazines. These blocks will attach to the lower spring and convert a 20 round magazine to hold only 10 or 15 rounds. (Select option below).
- Only for use in RUGER manufactured magazines.
- This is a modified USGI magblock.
$6.95 As low as: $5.95 -
ProMag DPMS LR-308 Magblock 10/20
Magblock for ProMag DPMS LR-308 20 Round Magazines. 10 or 15 Round Limiters available.
Fits Promag DPMS LR-308 20 round magazines in .308/7.62x51mm and will convert them to hold only 10 or 15 rounds.- Easy to install in seconds.
- No need to drill any holes.
- Load magazines on a closed bolt in most rifles.
- No external magazine modifications.$6.59 As low as: $5.49 -
AR10 ArmaLite Magblock 10/25 (.308)
Magblock for ArmaLite AR10 25 Round Magazines. 10 and 15 Round Limiters.
Fits ArmaLite AR10 .308/7.62x51mm 25 round magazines and will convert them to hold only 10 or 15 rounds.
- Easy to install in seconds.
- No need to drill any holes.
- Load magazines on a closed bolt in most rifles.
- No external magazine modifications.
- Select 10 or 15 round limiter below.$6.95 As low as: $5.95 -
Mini 14 MCL 10/30 Block (Tapco)
Mini 14 Magblock 10/30 MCL - Magazine Capacity Limiter for Tapco 30 Round .223/5.56mm Magazines)
- Fits new Tapco 30 round magazines for the Ruger Mini 14.
- These blocks will attach to the bottom of the spring.
- Converts a 30 round magazine to hold only 10 rounds.
*Only for use in TAPCO Mini 14 magazines.$6.95 As low as: $5.95 -
Thermold 15/30 Magblock
Magblock 15/30 MCL (15 Round Magazine Capacity Limiter) for Thermold 30 round AR-15/M16 Magazines.
- Fits Thermold 30 round black Zytel Nylon magazines in 5.56 mm, 223 Cal.
- Will convert a 30 round magazine to hold 15 rounds.
- Fits current production Thermold magazines as seen in the photos.
- Easy install using all of the original magazine components.$5.95 As low as: $5.50 -
E-Lander Elander 10/30 Magblock 10 Round Limiter
E-Lander Magblock 10/30 Magazine Capacity Limiter (10 Round Limiter)
- For use in E-Lander 30 round magazines.
- These blocks will convert a 30 round E-Lander magazine to hold only 10 rounds.
- Replaces the E-Lander locking plate and has a built in floor plate lock.- These can be used with USGI Ranger Plates and L-Plates. The bottom of the limiter can be modified for this and the block shortened by 2mm to allow room for the Magpul locking plate. We offer this as an option. You can also do it yourself following the instuctions found in the FAQ section here: http://www.magazineblocks.com/magento/faq FYI: Once the block is modified for use with a Ranger Plate or L-Plate the block can not be used without one of these products in place ot it will hold >10 rounds.
$5.95 As low as: $4.50 -
Vepr 7.62x39 mm 10/30 Magblock
Vepr 7.62 x 39 mm 10/30 Magblock- for SMG Tactical / Surefire Magazines
- Converts the Vepr polymer 7.62 x 39 mm 30 round magazine made by SMG Tactical to 10 rounds.
- This block fits the 30 round Vepr SMG (Surefire Gun Mags) or Surefire Magazines. (May fit others, but not tested at this time)
- This block will replace the original magazine locking plate.
- Also fits the Saiga 30 round 7.62x39 magazines made by SMG.
$7.49 As low as: $5.95 -
Thermold 10/30 Magblock
Magblock 10/30 MCL (Magazine Capacity Limiter) for Thermold 30 round AR-15/M16 Magazines.
- Fits Thermold 30 round black Zytel Nylon magazines in 5.56 mm, 223 Cal.
- Will convert a 30 round magazine to hold 10 rounds.
- Only fits current production Thermold magazines.- No modification of the original magazine is needed.$6.50 As low as: $5.95 -
CAA 10/30 Magblock 10 Round Limiter
10 Round Limiter for CAA Indicative 30 Round Polymer Magazines
Magblock 10/30 MCL (Magazine Capacity Limiter) for CAA 30 round polymer magazines in .223/5.56mm.
- This block will attach to the bottom of the spring, and sits on top of the original locking plate.
- Easy conversion of 30 round CAA magazines to hold 10 rounds.
- Does not affect reliability.
- No increase in spring pressure.$5.95 As low as: $5.25 -
IMI Defense Polymer 10/30 Magblock
10 and 15 Round Limiter for IMI Defense AR15 30 Round Polymer Magazines
Magblock 10/30 and 15/30 MCL (Magazine Capacity Limiter) for IMI Defense 30 round polymer magazines in .223/5.56mm.
- This block will attach to the bottom of the spring, and sits on top of the original locking plate.
- Easy conversion of 30 round magazine IMI magazines to hold only 10 rounds. Option to cut for 15 rounds available. Check box below.
- Does not affect reliability.
- No increase in spring pressure.
$7.95 As low as: $6.25 -
SWAMP FOX 10/30 Magblock 10 Round Limiter
10 Round Limiter for SWAMP FOX 30 Round Polymer Magazines
Magblock 10/30 MCL (Magazine Capacity Limiter) for Swamp Fox 30 round polymer magazines in .223/5.56mm. The Swamp Fox TMG-M30-P01 is a 30 round light weight polymer magazine that fits 5.56×45 NATO and .223 Remington AR15/M16 style firearms.
- This block will replace the lower spring attachment point or locking plate and convert a 30 round magazine to hold only 10 rounds.
- Customized base of the Magblock includes a locking point just like the original locking plate.
- Does not affect reliability.
- No increase in spring pressure.
- Easy to install.$5.95 As low as: $5.25