Magblock 10 Round Limiter for CZ P-09/P-09 F Nocturne (9mm) 19 Round Magazines

- Fits 19 round 9mm CZ P-09 Full-Size - P-09 F Nocturne magazines
- Easy installation at the base of the spring.
- Limits the magazine to 10 rounds of 9mm. 
- Held in place with spring tension or can be epoxied for a permanent modification. 
- Lightweight, efficient design. 
- Made of a super strong, heat resistant, fiber reinforced polymer.

Magblock for VZ 58 (7.62x39mm) Magazines.

- This block fits the VZ.58 30 round magazines in 7.62x39mm and will convert them to a 10 round magazine.

- Replaces the lower locking plate for an easy and secure install.

- These are marked as an "AK47" limiter but is modified to work in the VZ.58. I know these rifles don't usually share any parts :)

-NOTE: Only fits the type of VZ.58 magazine shown in the photos. These will not work if your magazine internals are significantly different than those pictured.

Magblock 10 and 15 Round Limiter for Magpul 30 Round AK-47 Pmag (7.62x39mm)

This block fits the new Magpul 30 round AK47 magazines and will convert them to hold 10 rounds.

- Replaces the lower locking plate for an easy and secure install.
- Built in spring catch holds the limiter securely in place and prevents noise.
- Also available as a 5 round limiter for 20 round Pmags and a 15 round option is available.
- Patented design not available anywhere else. 

*Made using out new Universal AK Limiter. If using the universal AK kit to make this limiter, cut so #39 shows in the indicator notch and use the Pmag lock insert. The block sold here come pre-cut for this size. 

Upgrade Stainless Steel AK replacement springs available for Pmag AK Magazines! Add to order below for a discount.  See our upgrade springs here: LINK

Magblock 10 Round Limiter for CZ Scorpion Evo (9mm) 30 Round Magazines

- Fits 30 round 9mm CZ Scorpion Evo magazines
- Easy installation at the base of the spring.
- Limits the magazine to 10 rounds of 9mm. 
- Held in place with spring tension or can be epoxied for a permanent modification. 
- Lightweight, efficient design. 
- Made of a super strong, heat resistant, fiber reinforced polymer.

 *This block is designed for the CZ factory Smoke Gray 30 Round magazines only. It will not work in the CZ factory Window magazines. Look at the picture below to determine which magazine you have. We carry blocks for both styles of magazines. 

CZ Evo Factory Window 10/30 Magblock: https://www.magazineblocks.com/magento/cz-scorpion-evo-10-30-window-magblock-10-and-15-round-limiter-9mm.html

PS90 MAGBLOCK  

- New and Improved Easy Install Design.

- This block will fit original 5.7x28mm PS90 Magazines made by FNH and some aftermarket magazines as well.

- The block attaches to the bottom of the magazine spring and will convert 50 round magazines to hold only 10 rounds.

- No modifications to your expensive FN PS90 magazines are needed to install.

- The block can be epoxied to the spring for a permanent modification.

*PATENT PENDING*

AR10 Magblock 5/10

Fits ACS and C-Products .308/7.62x51mm 10 round magazines and will convert them to hold only 5 rounds.

 - No need to drill any holes. 

 - Load magazines on a closed bolt.

 - Easy to install. 

- No external magazine modifications. 

- May fit other brand AR 10 Magazines. 

Magblock 10/30 MCL (Magazine Capacity Limiter) for Magpul 30 round Pmags in 300 Blackout only.

- This block will replace the lower spring attachment point  or locking plate and convert a 30 round magazine to hold only 10 rounds.

- The Pmag dust covers will still fit when loaded.

- Magazines can be loaded with the bolt closed.- Does not affect reliability.

- No increase in spring pressure. 

MagBlock Branded PMAG Retaining Plate For Gen M2 & Gen M3

- MagazineBlocks LLC locking plate for Magpul PMAG .223/ 5.56 magazines.

Fits 10, 20, and 30 round Pmags. This is our brand locking plate and is a great options if we're sold out of the factory Magpul version.

Works the same. Choose Generation of your magazines below: Gen M3 will state this on the side. If you don’t see it then you have Gen 2 / /MOE pmags.

Magblock for Mossberg 590M 2 Round Limiter for 5 Round Magazines (12ga)

• Fits Mossberg 5 round magazines and will limit them to 2 rounds in the magazine for hunting. 
• Fits under the follower. The original plug will need to be removed by pulling out with pliers. See photos.
• Can be held in with included screw or epoxy if a permanent modification is needed. 

Lancer L7 10/20 Limiter for 20 round magazines in .308/7.62x51mm.

- This block will replace the lower spring attachment point  or locking plate and convert a 20 round magazine to hold only 10 rounds.
- Only fits L7 Advanced Warfighter with slide on base as shown.
- Does not affect reliability.
- No increase in spring pressure or wear. 
Note: This is a custom modified Pmag block and will replace the original base. 

Ruger Mini 30 Magblock 10/20 Magazine Capacity Limiter

 This block is for use in RUGER 20 round factory Mini 30 magazines. These blocks will insert at the base of the magazine spring and convert a 20 round magazine to hold only 10 rounds.

- Only for use in RUGER manufactured magazines. 

Great for the range bag and to show your magazines are blocked. 

Also for patch collectors like myself :)

- 3” Round PVC 

- Hook and loop backing 

Magblock Universal Pistol Base only

Magblock 10 Round Limiter for Magpul 30 Round AK-74 Pmag (5.45x39mm)

- This block fits the new Magpul 30 round AK74 magazines and will convert them to hold 10 rounds.

- Replaces the lower locking plate for an easy and secure install.

- Built in spring catch holds the limiter securely in place and prevents noise.

- Made of super strong heat resistant polymer.