Products

Converts AR-15 7.62x39 C-Products and ASC 30 round magazine to 10 rounds

*ATTENTION: This posting is for the Magblock (only) and not for the magazine. We don't currently sell any magazines at all.

ASC - C-Products 10 Round Limiter 9mm AR-15 32 round magazine

This block will work with 9mm AR-15 magazines. It was designed for the C-products/Duramag and ASC magazines, but may work with other similar magazines. It replaces the lower floor plate. The spring can also be epoxied to the block which allows for disassembly. Can be cut down to fit other pistol caliber magazines. Will not fit UZI magazines but we do offer an UZI block. 

*ATTENTION: This posting is for the Magblock (only) and not for the magazine. We don't currently sell any magazines at all.

Converts FAL 20 round magazines to 10 rounds.

This block will fit surplus military FAL 20 round magazines and convert them to 10 rounds.
The end of the magazine spring will snap into the hole in the block to hold it in place.

*ATTENTION: This posting is for the Magblock (only) and not for the magazine. We don't currently sell any magazines at all.

Converts C-Products 6.8mm 25 round magazines to 10 rounds.

Magblock 10/25 MCL block for use in C-Products, ASC, and other 6.8 mm 25 round magazines. This block will convert a 25 round magazine to hold only 10 rounds of 6.8mm. May fit other 25 round 6.8 mm magazines also

NOTE: This it a cut down USGI Magblock, so the top was milled off. Works perfectly.

*ATTENTION: This posting is for the Magblock (only) and not for the magazine. We don't currently sell any magazines at all.

Saiga 10/30 Magblock 

- Converts the Saiga .223 Surefire 30 round magazine to 10 rounds.

- This block fits the Saiga polymer 30 round magazines in .223/5.56mm.

- This block will replace the original magazine locking plate.

- Fits  Surefire (SGM) magazines. Others may need modification for a correct fit.

*ATTENTION: This posting is for the Magblock (only) and not for the magazine. We don't currently sell any magazines at all.

Colt USGI 10/20 MCL Magblock

For use in ONLY Colt 20 round magazines. (See USGI 10/20 for other types of USGI magazines.)

-This block will attach to the bottom of the spring and convert 20 round magazines to hold only 10 rounds.

-COLT  USGI magazines use a modified 10/20 USGI block which has been trimmed and an adapter plate plastic welded on.

-Requires no magazine modifications. 

*ATTENTION: This posting is for the Magblock (only) and not for the magazine. We don't currently sell any magazines at all.

Works on G3 and HK91 twenty round magazines.

G3 and HK91 10/20 Block for 7.62x51mm or .308 magazines.

To Install:
This new design is held to the spring by removing the locking plate and installing the spring into the hole in the block as seen in the photo. The block and spring is then inserted back into the magazine. The locking plate is then positioned under the block. Then slide the floor plate closed as normal.

No external modifications to the magazine are necessary.

*ATTENTION: This posting is for the Magblock (only) and not for the magazine. We don't currently sell any magazines at all.

- Fits Gen 2 Pmag 20 only (Straight body)

Magblock 10/30 MCL (Magazine Capacity Limiter) for Magpul 30 round Pmags in .223/5.56mm.

- This block will replace the lower spring attachment point  or locking plate and convert a 30 round magazine to hold only 10 rounds.

- The Pmag dust covers will still fit when loaded.

- Magazines can be loaded with the bolt closed.

- Does not affect reliability.

- No increase in spring pressure. 

- Will also fit 30 round Emags. 

- Compatable with original Pmags and "M" Series only.  These will not work without modifications in Gen 3 or M3 Pmags. We will have another product set up to buy pre-trimmed M3 blocks. Here are instructions on how to trim blocks to work with Gen M3 Pmags:   http://www.calguns.net/calgunforum/showpost.php?p=9787410&postcount=261

SCAR 17 MAGBLOCK  

- New and Improved Easy Install Design.

- This block will fit original 7.62x51mm NATO/.308 SCAR 17 Magazines made by FNH.

- The block attaches to the bottom of the magazine spring and will convert 20 round magazines to hold only 10 rounds.

- No modifications to your expensive FN SCAR magazines are needed to install.

- The block can be epoxied to the spring for a permanent modification.

Made from super strong ABS plastic.

*PATENT PENDING*

PMAG GEN M2 LR20 Magblock for .308/7.62x51 Magazine

Fits the Magpul LR20 .308/7.62x51mm Pmags (All older versions) and will convert them to hold only 10 rounds. Easy to install. You will not use the original factory locking plate with this block.

- Will NOT fit new Gen M3 Version. Fits all prior versions.

 - Dust covers still fit with 10 rounds loaded.

 - Load magazines on a closed bolt.

 - Easy to install. 

- No external magazine modifications. 

*ATTENTION: This posting is for the Magblock (only) and not for the magazine. We don't currently sell any magazines at all.

10 Block Bulk Pack

• 10 block bulk pack. Includes ONLY the following: Pmag M2/MOE 10/30, Pmag M2/MOE 10/20, USGI 10/30, and USGI 10/20, HK G36, XD/XDm 9 and .40 Pistol blocks, and Glock 9 and .40 Pistol blocks, excluding the Glock 10/33. 
• You MUST specify the quantity and type of each block below. Please be specific. 

Excludes 10/20 Colt blocks and Gen 3 blocks

Springfield XD 9mm Magblock

• Fits 16 round XD and XD Mod 2 9mm magazines.
• Easy installation under the magazine follower.
• Limits the magazine to 10 rounds of 9mm.
• Held in place with spring tension or can be epoxied for a permanent modification. 
• Lightweight, efficient design. 

Heckler & Koch G36 Magblock

- Works with Magpul Pmag Magazines for the HK G36 only.

- 10/30 configuration (10 rounds in a 30 round body)

- Replaces the original locking plate

- Simple quick install.