Products

Converts 9mm AR-15 20 round magazine to 10 rounds.

- This block will work with 9mm 20 round AR-15 magazines.

- Marked where to cut for a 15 round block.

- It replaces the lower magazine locking plate.

- The spring can also be epoxied to the block which allows for disassembly. 

15 Round Limiter for Gen M3 30 Round Pmags

Magblock 15/30 MCL (Magazine Capacity Limiter) for Magpul 30 round Gen M3 Pmags in .223/5.56mm. 

- This block will replace the lower spring attachment point  or locking plate and convert a 30 round magazine to hold only 15 rounds.

- The Pmag dust covers will still fit when loaded.

- Magazines can be loaded with the bolt closed on many rifles.

- Does not affect reliability.

- No increase in spring pressure. 

- Compatable with new Magpul Gen 3 Pmags only.  These will not work in original Pmags.'

- Attention: We now offer the option to use our block with the Magpul factory retaining plate with our block. The block will sit on top of the Magpul retaining plate and is cut differently than our standard Gen M3 10/30 magblock. If you're planning on not using the factory retaining plate then we have an options for you.

SCAR 17 MAGBLOCK for THERMOLD 20 Round. Also fits Rock River Arms LAR-8 Polymer Magazines.

- This block will fit 7.62x51mm NATO/.308 SCAR 17 and LAR-8 Magazines made by THERMOLD and RRA ONLY. 

- The block attaches to the bottom of the magazine spring and will convert 20 round magazines to hold only 10 rounds.

- No modifications to your expensive FN SCAR magazines are needed to install.

- The block can be epoxied to the spring for a permanent modification.

Made from a solid polymer. These are very strong and heat stable to over 260 degrees F.  New easy to install design with spring catch.

*PATENT PENDING*

NOTE: The 10 th round may fit a little tighter in the RRA magazines, and need to be loaded with the bolt open. You can always custom fit the limiter if desired.

Magblock 10 Round Magazine Capacity Limiter for Thermold 15 and 20 round AR-15/M16 Magazines.

- Will convert both a 20 or 15 round magazine to hold only 10 rounds.

- Only fits current production Thermold magazines. Has not been tested on older versions. Some modification may be needed for older production magazines. 
- The Thermold 15 and 20 round magazines use the same body size and differ only by a slight internal modification. The same limiter will limit both magazines to 10 rounds. 

10 Round Limiter for Promag COL-A18 - AR15 30 Round Polymer Magazines

Magblock 10/30 MCL (Magazine Capacity Limiter) for Promag 30 round polymer magazines in .223/5.56mm. Model COL-A18. 

- This block will replace the lower spring attachment point  or locking plate and convert a 30 round magazine to hold only 10 rounds.

- Customized base of the Magblock includes two locking points just like the original locking plate.

- Does not affect reliability.

- No increase in spring pressure. 

- Compatable with Promag model:  COL-A18 - AR-15 / M16 .223-5.56x45mm (30)Rd Black Polymer Magazines only. These magazines have 2 small posts on the locking plate that lock into the floor plate.

Magblock 15/20 MCL (Magazine Capacity Limiter) for Magpul 20 round Pmags in .223/5.56mm. (Gen 2 only)

- This block will replace the lower spring attachment point  or locking plate and convert a 20 round magazine to hold only 15 rounds.

- Magazines can be loaded with the bolt closed.

- Does not affect reliability.

- No increase in spring pressure. 

Note: This is a trimmed down 10 round block to allow 15 rounds.  These fit Straight Body Gen 2 Pmags only.  Gen 3 limiters are available as a different product. 

Magblock 15/30 MCL (Magazine Capacity Limiter) for Magpul 30 round Pmags in .223/5.56mm. (Gen 2)

- This block will replace the lower spring attachment point  or locking plate and convert a 30 round magazine to hold only 15 rounds.

- Magazines can be loaded with the bolt closed.

- Does not affect reliability.

- No increase in spring pressure. 

- Will also fit 30 round Emags.

Note: This is a trimmed down 10 round block to allow 15 rounds.  These will not work in Gen M3 Pmags. Gen M3 Pmag 15 round limiters are available as a different product. These fit Gen 2 Pmags only.  

Troy BattleMag 10/30 MCL (Magazine Capacity Limiter) for 30 round Troy BattleMags in .223/5.56mm.

- This block will sit on top of the Troy locking plate and convert a 30 round magazine to hold only 10 rounds.

- The optional shock absorbing floor plate will still function normally.

- Does not affect reliability.

- No increase in spring pressure or wear. 

(Note: This is a custom trimmed Pmag block)

Magblock 15/30 MCL (15 Round Magazine Capacity Limiter) for Thermold 30 round AR-15/M16 Magazines.

E-Lander Magblock 10/30 Magazine Capacity Limiter (10 Round Limiter)

- For use in E-Lander 30 round magazines.
- These blocks will convert a 30 round E-Lander magazine to hold only 10 rounds. 
- Replaces the E-Lander locking plate and has a built in floor plate lock.  

- These can be used with USGI Ranger Plates and L-Plates. The bottom of the limiter can be modified for this and the block shortened by 2mm to allow room for the Magpul locking plate. We offer this as an option. You can also do it yourself following the instuctions found in the FAQ section here: http://www.magazineblocks.com/magento/faq  FYI: Once the block is modified for use with a Ranger Plate or L-Plate the block can not be used without one of these products in place ot it will hold >10 rounds. 

Converts FAL 30 round magazines to 10 rounds.

This block will fit FAL 30 round magazines and convert them to 10 rounds.
The end of the magazine spring will snap into the hole in the block to hold it in place.

Tested in DSARMS manufactured 30 round magazines, but should work in other similar magazines.

M&P15 .22LR 10/25 Magblock 10 Round Limiter

- This block will convert 25 round M&P15 .22LR magazines into a 10 round magazine.

- Easy to install without damage to your magazines.

- Replaces the original locking plate.

Magblock for Vepr .308 20 Round Magazines.  5, 10 and 15 Round Limiters.

Fits Vepr .308/7.62x51mm 20 round magazines made by Csspecs>