Products
-
SPRINGFIELD M14 -M1A 10/15
Fits Springfield M14/M1A 7.62x51mm/.308 15 round magazines.
- Easiest and quickest way to make a 10 round M14 Magazine.
- Can be permanently attached to the spring with epoxy.
- The block attaches to the spring to prevent noise and movement.
- No magazine modifications required.
-Allows loading on a closed bolt with 10 rounds installed.
$6.50 As low as: $5.95 -
H&K416 22LR 10/30 Magblock
HK416 22LR 10/30 Magblock 10 Round Limiter
- This block will convert 30 round HK 416 22LR magazines into a 10 round magazine.
- Easy to install without damage to your magazines.
$6.95 As low as: $5.49 -
Promag COL-A18 AR 10/30 Magblock 10 Round Limiter
10 Round Limiter for Promag COL-A18 - AR15 30 Round Polymer Magazines
Magblock 10/30 MCL (Magazine Capacity Limiter) for Promag 30 round polymer magazines in .223/5.56mm. Model COL-A18.
- This block will replace the lower spring attachment point or locking plate and convert a 30 round magazine to hold only 10 rounds.
- Customized base of the Magblock includes two locking points just like the original locking plate.
- Does not affect reliability.
- No increase in spring pressure.
- Compatable with Promag model: COL-A18 - AR-15 / M16 .223-5.56x45mm (30)Rd Black Polymer Magazines only. These magazines have 2 small posts on the locking plate that lock into the floor plate.
$6.50 As low as: $5.95 -
Gen 2 Pmag 15/20 Magblock (Gen 2)
Magblock 15/20 MCL (Magazine Capacity Limiter) for Magpul 20 round Pmags in .223/5.56mm. (Gen 2 only)
- This block will replace the lower spring attachment point or locking plate and convert a 20 round magazine to hold only 15 rounds.
- Magazines can be loaded with the bolt closed.
- Does not affect reliability.
- No increase in spring pressure.
Note: This is a trimmed down 10 round block to allow 15 rounds. These fit Straight Body Gen 2 Pmags only. Gen 3 limiters are available as a different product.
$5.95 As low as: $3.95 -
Gen 2 Pmag 15/30 Magblock (GEN 2)
Magblock 15/30 MCL (Magazine Capacity Limiter) for Magpul 30 round Pmags in .223/5.56mm. (Gen 2)
- This block will replace the lower spring attachment point or locking plate and convert a 30 round magazine to hold only 15 rounds.
- Magazines can be loaded with the bolt closed.
- Does not affect reliability.
- No increase in spring pressure.
- Will also fit 30 round Emags.
Note: This is a trimmed down 10 round block to allow 15 rounds. These will not work in Gen M3 Pmags. Gen M3 Pmag 15 round limiters are available as a different product. These fit Gen 2 Pmags only.
$5.95 As low as: $3.95 -
Troy BattleMag 10/30 Magblock
Troy BattleMag 10/30 MCL (Magazine Capacity Limiter) for 30 round Troy BattleMags in .223/5.56mm.
- This block will sit on top of the Troy locking plate and convert a 30 round magazine to hold only 10 rounds.
- The optional shock absorbing floor plate will still function normally.
- Does not affect reliability.
- No increase in spring pressure or wear.
(Note: This is a custom trimmed Pmag block)
$6.50 As low as: $5.95 -
AR-9mm 10/32 ProMag Block
- Converts 9mm AR-15 32 round magazine to 10 rounds.
- This block will work with 9mm AR-15 magazines made by ProMag only.
- It replaces the lower floor plate.
- The spring can also be epoxied to the block which allows for disassembly and cleaning.
- We have a separate block available for UZI, C-Products, and ASC 32 round magazines. This one only fits Promag magazines.
$6.95 As low as: $5.95 -
ARSENAL CIRCLE 10 AK47 10/30 Magblock (7.62)
Arsenal Bulgarian AK47 10/30 Magblock
This block fits the Arsenal 30 round AK47 magazines and will convert them to a 10 round magazine.
-Replaces the lower locking plate.
-Works on Arsenal Bulgarian 7.62x39mm AK magazines.
Note: This block is made from our Universal AK Kits cut to #38 using a square locking plate.
$7.49 As low as: $5.95 -
Springfield XD 9mm 10/16 Magblock (9mm)
Springfield XD 9mm Magblock
- Fits 16 round XD and XD Mod 2 9mm magazines.
- Easy installation under the magazine follower.
- Limits the magazine to 10 rounds of 9mm.
- Held in place with spring tension or can be epoxied for a permanent modification.
- Lightweight, efficient design.
$6.50 As low as: $5.95 -
H&K MAGPUL G36 10/30 Magblock
Heckler & Koch G36 Magblock
- Works with Magpul Pmag Magazines for the HK G36 only.
- 10/30 configuration (10 rounds in a 30 round body)
- Replaces the original locking plate
- Simple quick install.
$6.25 As low as: $4.75 -
Tapco AR .223 /5.56mm 10/30 Block
Tapco Intrafuse AR-15 Magblock
- Magblock 10/30 MCL block for use in polymer Tapco Intrafuse AR-15 magazines.
- This block will convert a 30 round magazine to hold only 10 rounds.
- The block replaces the lower Tapco locking plate.
NOTE: The Tapco follower must be modified like in the picture to hold all 10 rounds.
$6.59 As low as: $5.49 -
AR-10 C-Products/ASC 10/20 Magblock (.308)
AR10 Magblock 10/20
Fits ACS and C-Products .308/7.62x51mm 20 round magazines and will convert them to hold only 10 rounds.
- No need to drill any holes.
- Load magazines on a closed bolt.
- Easy to install.
- No external magazine modifications.
- May fit other brand AR 10 Magazines.
$6.95 As low as: $5.95 -
SCAR 17 Magblock 15/20
SCAR 17 MAGBLOCK
- New and Improved Easy Install Design.
- This block will fit original 7.62x51mm NATO/.308 SCAR 17 Magazines made by FNH.
- The block attaches to the bottom of the magazine spring and will convert 20 round magazines to hold only 15 rounds.
- No modifications to your expensive FN SCAR magazines are needed to install.
- The block can be epoxied to the spring for a permanent modification.
- Can also limit a 10 round Scar 17 magazine to 5 rounds.
Made from super strong ABS plastic.
*PATENT PENDING*
$10.95 As low as: $8.95 -
SCAR 17 Magblock 5/20
SCAR 17 MAGBLOCK 5/20
- New and Improved Easy Install Design. Makes removal after hunting season easier.
- This block will fit original 7.62x51mm NATO/.308 SCAR 17 Magazines made by FNH.
- The block attaches to the bottom of the magazine spring and will convert 20 round magazines to hold only 5 rounds.
- No modifications to your expensive FN SCAR magazines are needed to install.
- The block can be secured to the spring for a permanent modification or removed to restore full 20 round capacity.
- For use where hunting laws restrict capacity to 5 rounds.
Made from super strong ABS plastic.
*PATENT PENDING*
$10.95 As low as: $8.95 -
Thermold 10/20 and 10/15 Magblock
Magblock 10 Round Magazine Capacity Limiter for Thermold 15 and 20 round AR-15/M16 Magazines.
- Fits Thermold 20 round and 15 round black Zytel Nylon magazines in 5.56 mm, 223 Cal.- Will convert both a 20 or 15 round magazine to hold only 10 rounds.
- Only fits current production Thermold magazines. Has not been tested on older versions. Some modification may be needed for older production magazines.
- The Thermold 15 and 20 round magazines use the same body size and differ only by a slight internal modification. The same limiter will limit both magazines to 10 rounds.$6.50 As low as: $5.95