Products
-
Mission First Tactical AR-10 Magblock (.308)
Mission First Tactical Extreme Duty AR-10 Magazine Limiter for 20 Round Magazines
Fits the Mission First Tactical AR-10 .308/7.62x51mm magazines and will convert them to hold only 5, 10, or 15 rounds. Select desired size below. Easy to install.
- Load magazines on a closed bolt in most rifles.
- Easy to install.
- No external magazine modifications.
-This block requires you to use the factory Mission First Tactical locking plate with our block to work correctly.
*ATTENTION: This posting is for the Magblock (only) and not for the magazine. We don't currently sell any magazines at all.
$6.50 As low as: $5.95 -
POF Tombstone, Phoenix Magblock 10/20 (9mm)
Magblock Limiters for Patriot Ordnance Factory Tombstone and Phoenix 9mm 20 Round magazine
- This block fits the POF Tombstone - Phoenix 20 round 9mm magazines and will convert them to hold 10 or 15 rounds.
-Installs right under the follower and is held in place by spring tension.
- Made of super strong heat resistant polymer.
$7.49 As low as: $5.95 -
POF Tombstone, Phoenix Magblock 10/35 (9mm)
Magblock Limiters for Patriot Ordnance Factory Tombstone and Phoenix 9mm 35 Round magazine
- This block fits the POF Tombstone - Phoenix 35 round 9mm magazines and will convert them to hold 10 or 15 rounds.
-Installs right under the follower and is held in place by spring tension.
- Made of super strong heat resistant polymer.
$7.49 As low as: $5.95 -
Kel-Tec PLR-22, SU-22 Magblock 10/26 (.22LR)
Kel-Tec PLR-22 & SU-22 .22LR 10/26 Magblock 10 Round and 15 Round Limiter
- This block will convert 26 round Kel-Tec PLR-22, SU-22 .22LR magazines into a 10 or 15 round magazine.
- Easy to install without damage to your magazines. Installs at the base, using the stock locking plate.
*ATTENTION: This posting is for the Magblock (only) and not for the magazine. We don't currently sell any magazines at all.
$6.95 As low as: $5.95 -
Kel-Tec P11 Magblock 10/12 (9mm)
Kel-Tec P11 & P15 (9mm) 10/12 Magblock 10 Round Limiter
- This block will convert 12 round Kel-Tec P11 (9mm) magazines into a 10 round magazine.
- Easy to install without damage to your magazines.
$6.59 As low as: $5.95 -
ProMag GSG-16 Magblock 10/22 (.22LR)
ProMag GSG-16, GSG-5, 522 .22LR 10/22 Magblock 10 & 15 Round Limiter
- This block will convert 22 round Promag GSG .22LR magazines into a 10 or 15 round magazine.
- Easy to install without damage to your magazines.
- Installs at the base of the magazne.
** This block will not work in factory GSG-5 .22LR magazines. It's only intended to work in the Promag GSG magazine.
*ATTENTION: This posting is for the Magblock (only) and not for the magazine. We don't currently sell any magazines at all.
$6.49 As low as: $5.95 -
Feather Industries AT-22 Magblock 10/20 (.22LR) (No Magazine Included)
Feather Industries AT-22 .22LR 10/20 Magblock 10 Round Limiter
- This block will convert 20 round Feather Industries .22LR magazines into a 10 round magazine.
- Easy to install without damage to your magazines.
-Installs at the base of the magazne.
-This listing is for the magblock (only). No Magazine is included with your purchase.
$6.49 As low as: $5.95 -
USGI AR15 MAGBLOCK 10/30 (RETAIL 3 PACK)
USGI 3-Pack Retail Packing Magblock 10/30 MCL (Magazine Capacity Limiter) for AR15/M16 Magazines
- For use in USGI type 30 round magazines for the AR15/M16.
- Will also fit SCAR 16 GI Magazines. Not factory FN SCAR 16 magazines.
- These blocks will convert a 30 round magazine to hold only 10 rounds.
- Works great with Magpul anti-tilt followers.
- Fits Brownells, C-Products, ACS, D&H, NHMTG, Colt, and most other metal .223/5.56 mm 30 round magazines.-Original military style green USGI followers may need to be trimmed or replaced to work properly. If your followers have a green spike in the middle this will have to be cut down to work properly. Please see the training video section or the other photo here for instructions on how to do this. The link to the FAQ section also provides more information.
-These will not work in the Surefeed E2 USGI AR-15 magazines without modification.
$18.49 As low as: $16.49 -
USGI AR15 Magblock 5/10 (5.56)
Magblock 5/10 USGI MCL (Magazine Capacity Limiter) for AR15/M16 Magazines
- For use in USGI type 10 round magazines for the AR15/M16.
- These blocks will convert a 10 round magazine to hold only 5 rounds.
- Works great Magpul anti-tilt followers.
- Fits Brownells, C-Products, ACS, D&H, NHMTG, Colt, and most other metal .223/5.56 mm 30 round magazines.-Original military style green USGI followers may need to be trimmed or replaced to work properly. If your followers have a green spike in the middle this will have to be cut down to work properly. Please see the training video section or the other photo here for instructions on how to do this. The link to the FAQ section also provides more information.
$6.50 As low as: $5.49 -
ASC AR 7.62x39 New Style Block 10/20
- New Design
- Converts the updated ASC AR-15 7.62x39 20 round magazine to 10 rounds.
- Easy installation
- Does not affect reliability
- Attention: This block won't work in the Duramag AR-15 7.62x39 20 round magazine. We do offer a block for the Duramag 20 round magazine below.
$7.49 As low as: $5.95 -
ASC 6.8 SPC 10/25 Magblock
ASC USGI 6.8 SPC Magblock 10/25 MCL (Magazine Capacity Limiter)
- For use in ASC USGI 6.8 SPC 25 round magazines.
- These blocks will convert a 25 round magazine to hold only 10 rounds.$5.95 As low as: $5.49 -
VZ58 Magblock 10/30 Limiter
Magblock for VZ 58 (7.62x39mm) Magazines.
- This block fits the VZ.58 30 round magazines in 7.62x39mm and will convert them to a 10 round magazine.
- Replaces the lower locking plate for an easy and secure install.
- These are marked as an "AK47" limiter but is modified to work in the VZ.58. I know these rifles don't usually share any parts :)
-NOTE: Only fits the type of VZ.58 magazine shown in the photos. These will not work if your magazine internals are significantly different than those pictured.
$7.49 As low as: $6.49 -
Mini 14 MCL 10/30 Block (Tapco)
Mini 14 Magblock 10/30 MCL - Magazine Capacity Limiter for Tapco 30 Round .223/5.56mm Magazines)
- Fits new Tapco 30 round magazines for the Ruger Mini 14.
- These blocks will attach to the bottom of the spring.
- Converts a 30 round magazine to hold only 10 rounds.
*Only for use in TAPCO Mini 14 magazines.$6.95 As low as: $5.95 -
Thermold 15/30 Magblock
Magblock 15/30 MCL (15 Round Magazine Capacity Limiter) for Thermold 30 round AR-15/M16 Magazines.
- Fits Thermold 30 round black Zytel Nylon magazines in 5.56 mm, 223 Cal.
- Will convert a 30 round magazine to hold 15 rounds.
- Fits current production Thermold magazines as seen in the photos.
- Easy install using all of the original magazine components.$5.95 As low as: $5.50 -
E-Lander Elander 10/30 Magblock 10 Round Limiter
E-Lander Magblock 10/30 Magazine Capacity Limiter (10 Round Limiter)
- For use in E-Lander 30 round magazines.
- These blocks will convert a 30 round E-Lander magazine to hold only 10 rounds.
- Replaces the E-Lander locking plate and has a built in floor plate lock.- These can be used with USGI Ranger Plates and L-Plates. The bottom of the limiter can be modified for this and the block shortened by 2mm to allow room for the Magpul locking plate. We offer this as an option. You can also do it yourself following the instuctions found in the FAQ section here: http://www.magazineblocks.com/magento/faq FYI: Once the block is modified for use with a Ranger Plate or L-Plate the block can not be used without one of these products in place ot it will hold >10 rounds.
$5.95 As low as: $4.50
