Products
-
Thermold 10/20 and 10/15 Magblock
Magblock 10 Round Magazine Capacity Limiter for Thermold 15 and 20 round AR-15/M16 Magazines.
- Fits Thermold 20 round and 15 round black Zytel Nylon magazines in 5.56 mm, 223 Cal.- Will convert both a 20 or 15 round magazine to hold only 10 rounds.
- Only fits current production Thermold magazines. Has not been tested on older versions. Some modification may be needed for older production magazines.
- The Thermold 15 and 20 round magazines use the same body size and differ only by a slight internal modification. The same limiter will limit both magazines to 10 rounds.$6.95 As low as: $5.95 -
Promag COL-A18 AR 10/30 Magblock
10 Round Limiter for Promag COL-A18 - AR15 30 Round Polymer Magazines
Magblock 10/30 MCL (Magazine Capacity Limiter) for Promag 30 round polymer magazines in .223/5.56mm. Model COL-A18.
- This block will replace the lower spring attachment point or locking plate and convert a 30 round magazine to hold only 10 rounds.
- Customized base of the Magblock includes two locking points just like the original locking plate.
- Does not affect reliability.
- No increase in spring pressure.
- Compatable with Promag model: COL-A18 - AR-15 / M16 .223-5.56x45mm (30)Rd Black Polymer Magazines only. These magazines have 2 small posts on the locking plate that lock into the floor plate.
$6.50 As low as: $5.95 -
Gen 2 Pmag 15/20 Magblock (Gen 2)
Magblock 15/20 MCL (Magazine Capacity Limiter) for Magpul 20 round Pmags in .223/5.56mm. (Gen 2 only)
- This block will replace the lower spring attachment point or locking plate and convert a 20 round magazine to hold only 15 rounds.
- Magazines can be loaded with the bolt closed.
- Does not affect reliability.
- No increase in spring pressure.
Note: This is a trimmed down 10 round block to allow 15 rounds. These fit Straight Body Gen 2 Pmags only. Gen 3 limiters are available as a different product.
$6.09 As low as: $4.49 -
Gen 2 Pmag 15/30 Magblock (GEN 2)
Magblock 15/30 MCL (Magazine Capacity Limiter) for Magpul 30 round Pmags in .223/5.56mm. (Gen 2)
- This block will replace the lower spring attachment point or locking plate and convert a 30 round magazine to hold only 15 rounds.
- Magazines can be loaded with the bolt closed.
- Does not affect reliability.
- No increase in spring pressure.
- Will also fit 30 round Emags.
Note: This is a trimmed down 10 round block to allow 15 rounds. These will not work in Gen M3 Pmags. Gen M3 Pmag 15 round limiters are available as a different product. These fit Gen 2 Pmags only.
$6.59 As low as: $4.95 -
Troy BattleMag 10/30 Magblock
Troy BattleMag 10/30 MCL (Magazine Capacity Limiter) for 30 round Troy BattleMags in .223/5.56mm.
- This block will sit on top of the Troy locking plate and convert a 30 round magazine to hold only 10 rounds.
- The optional shock absorbing floor plate will still function normally.
- Does not affect reliability.
- No increase in spring pressure or wear.
(Note: This is a custom trimmed Pmag block)
$6.95 As low as: $5.95 -
Vepr 7.62x39 mm 10/30 Magblock
Vepr 7.62 x 39 mm 10/30 Magblock- for SMG Tactical / Surefire Magazines
- Converts the Vepr polymer 7.62 x 39 mm 30 round magazine made by SMG Tactical to 10 rounds.
- This block fits the 30 round Vepr SMG (Surefire Gun Mags) or Surefire Magazines. (May fit others, but not tested at this time)
- This block will replace the original magazine locking plate.
- Also fits the Saiga 30 round 7.62x39 magazines made by SMG.
$7.49 As low as: $5.95 -
E-Lander Elander 10/30 Magblock 10 Round Limiter
E-Lander Magblock 10/30 Magazine Capacity Limiter (10 Round Limiter)
- For use in E-Lander 30 round magazines.
- These blocks will convert a 30 round E-Lander magazine to hold only 10 rounds.
- Replaces the E-Lander locking plate and has a built in floor plate lock.- These can be used with USGI Ranger Plates and L-Plates. The bottom of the limiter can be modified for this and the block shortened by 2mm to allow room for the Magpul locking plate. We offer this as an option. You can also do it yourself following the instuctions found in the FAQ section here: http://www.magazineblocks.com/magento/faq FYI: Once the block is modified for use with a Ranger Plate or L-Plate the block can not be used without one of these products in place ot it will hold >10 rounds.
$5.95 As low as: $4.50 -
Thermold 15/30 Magblock
Magblock 15/30 MCL (15 Round Magazine Capacity Limiter) for Thermold 30 round AR-15/M16 Magazines.
- Fits Thermold 30 round black Zytel Nylon magazines in 5.56 mm, 223 Cal.
- Will convert a 30 round magazine to hold 15 rounds.
- Fits current production Thermold magazines as seen in the photos.
- Easy install using all of the original magazine components.$5.95 As low as: $5.50 -
FAL 10/30 Magblock
Converts FAL 30 round magazines to 10 rounds.
This block will fit FAL 30 round magazines and convert them to 10 rounds.
The end of the magazine spring will snap into the hole in the block to hold it in place.Tested in DSARMS manufactured 30 round magazines, but should work in other similar magazines.
$6.59 As low as: $4.95 -
VEPR .308 Magblock 5, 10, and 15 Round Limiters
Magblock for Vepr .308 20 Round Magazines. 5, 10 and 15 Round Limiters.
Fits Vepr .308/7.62x51mm 20 round magazines made by Csspecs>
- Easy to install in seconds.
- Tested in Vepr magazines made by Csspecs. May fit other manufacturers with or without modification.
- Replaces the original locking plate.
- No external magazine modifications.
- Select 5, 10 or 15 round limiter below.$6.95 As low as: $5.95 -
PMAG GEN M3 LR/SR-25 Magblock 10/20 (.308)
Pmag LR20 Magblock GEN M3 Magazine Capacity Limiters (5, 10, and 15 Round Limiters Available)
Fits the Magpul LR20 .308/7.62x51mm Pmags and will convert them to hold only 5, 10, or 15 rounds. Select desired size below. Easy to install.
- Will NOT fit older version magazines. Gen M3 Only.
- Dust covers still fit with 10 rounds loaded.
- Load magazines on a closed bolt in most rifles.
- Easy to install.
- No external magazine modifications.
-This block requires you use the factory Magpul locking plate with our block (See picture 1 and 2).
$6.59 As low as: $5.95 -
CAA 15/30 Magblock 15 Round Limiter
15 Round Limiter for CAA Indicative 30 Round Polymer Magazines
Magblock 15/30 MCL (Magazine Capacity Limiter) for CAA 30 round polymer magazines in .223/5.56mm.
- This block will attach to the bottom of the spring, and sits on top of the original locking plate.
- Easy conversion of 30 round CAA magazines to hold 15 rounds.
- Does not affect reliability.
- No increase in spring pressure.$6.25 As low as: $5.25 -
AR-10 ArmaLite Magblock 10/20 (.308)
Magblock for ArmaLite AR10 20 Round Magazines. 10 and 15 Round Limiters.
Fits ArmaLite AR10 .308/7.62x51mm 20 round magazines and will convert them to hold either 10 or 15 rounds.
- Easy to install in seconds.
- No need to drill any holes.
- Load magazines on a closed bolt in most rifles.
- No external magazine modifications required.New lighter, more reliable design is made from abs plastic.
$6.95 As low as: $5.95 -
Steyr AUG 10/30 Magblock (5.56)
10 Round Limiter for Steyr AUG 30 Round Polymer Magazines
Magblock 10/30 MCL (Magazine Capacity Limiter) for Steyr AUG 30 round polymer magazines in .223/5.56mm.
- This block will replace the lower spring attachment point or locking plate and convert a 30 round magazine to hold only 10 rounds.
- Customized base of the Magblock includes two locking points just like the original locking plate.
- Does not affect reliability.
- No increase in spring pressure.
$7.49 As low as: $6.69 -
Pmag Ranger Plate .223 Black- Gen M3
For use with Magpul Pmag Gen M3Gen M3 Magpul PMAG Ranger Plate
This is a floorplate replacement for the 5.56x45 PMAG Gen M3 that incorporates an integral loop similar to the original Magpul USGI Ranger.
When installed on the base of a magazine, the PMAG Ranger Plate provides unsurpassed speed and control during high stress, tactical magazine changes.
Fits Gen M3 Pmags only in 10, 20, and 30 round sizes.
$7.95
