Products

PROMAG Ruger Mini 30 Magblock 10/30 Magazine Capacity Limiter

 This block is for use in PROMAG RUGER 30 round Mini 30 magazines. These blocks will insert at the base of the magazine spring and convert a 20 round magazine to hold only 10 rounds.

- Only for use in PROMAG manufactured magazines. 

- Designed to work in the polymer magazine only.

ProMag M14/M1A 7.62x51mm/.308 20 round magazines.

- Easiest and quickest way to make a 10 round M14 Promag (Only) Magazine.

- Can be permanently attached to the spring with epoxy.

- The block attaches to the spring to prevent noise and movement.

- No magazine modifications required.

-Allows loading on a closed bolt with 10 rounds installed.

-New light weight design.

-This block is designed for the PROMAG M14/M1A 20 Round magazine, only. Military surplus and other manufacturers use our standard block.

Pmag LR10 Magblock GEN M3 Magazine Capacity Limiters (5 Round for Hunting)

Fits the Magpul LR10 .308/7.62x51mm 10 round Pmags and will convert them to hold only 5 rounds for hunting. 

- Will NOT fit older version magazines. Gen M3 Only.

- Load magazines on a closed bolt in most rifles.

- Easy to install. New style block allows you to use the stock locking plate.

- No external magazine modifications.

GSG-15 .22LR 10/22 Magblock 10 and 15 Round Limiter

- This block will convert 22 round GSG-15 .22LR magazines into a 10 round magazine.

- Easy to install without damage to your magazines.

-Installs at the base of the magazne.

GSG AK-47 .22LR 10/24 Magblock 10 and 15 Round Limiter

- This block will convert 24 round GSG AK-47 .22LR magazines into a 10 or 15 round magazine.

- Easy to install without damage to your magazines.

-Installs at the base of the magazne.

Lancer L7 5/10 Limiter for 10 round magazines in .308/7.62x51mm.

- This block will replace the lower spring attachment point  or locking plate and convert a 10 round magazine to hold only 5 rounds for hunting.
- Only fits L7 Advanced Warfighter with slide on base as shown.
- Does not affect reliability.
- No increase in spring pressure or wear. 
Note: This is a custom modified Pmag block and will replace the original base. 

CMMG USGI AR-15 .22LR 10/25 Magblock 10 Round Limiter

- This block will convert 25 round CMMG USGI AR-15 .22LR magazines into a 10 round magazine.

- Easy to install without damage to your magazines. Allows use of factory locking plate and base plate.

 -This block is for CMMG .22LR USGI magazines in the pictures only. Will not work in Clear CMMG .22LR magazines. 

Lancer L7 5/20 Limiter for 20 round magazines in .308/7.62x51mm.

- This block will replace the lower spring attachment point  or locking plate and convert a 20 round magazine to hold only 5 rounds for hunting.
- Only fits L7 Advanced Warfighter with slide on base as shown.
- Does not affect reliability.
- No increase in spring pressure or wear. 
Note: This is a custom modified Pmag block and will replace the original base. 

• New Design
• Converts the updated DURAMAG AR-15 7.62x39 20 round magazine to 10 rounds.
• Easy installation 
• Does not affect reliability 

Ruger Mini 30 Magblock 5/10 Magazine Capacity Limiter

 This block is for use in RUGER 10 round factory Mini 30 magazines. These blocks will insert at the base of the magazine spring and convert a 10 round magazine to hold only 5 rounds for hunting.

- Only for use in RUGER manufactured magazines. 

Magpul Industries Magazine Coupler (Fits PMAG and GEN M3)

- Fits 5.56x45 PMAG 30 and 40 round AR/M4 GEN M2 MOE and AR/M4 GEN M3 magazines

- Two-piece bolt-on design

- Impact resistant polymer

SIG MCX SPEAR Pmag LR20 Magblock GEN M3 Magazine Capacity Limiters (5, 10, and 15 Round Limiters Available)

Fits the Magpul LR20 .308/7.62x51mm Pmags and will convert them to hold only 5, 10, or 15 rounds. Select desired size below. Easy to install. 

- Will NOT fit older version magazines. Gen M3 Only.

- Dust covers still fit with 10 rounds loaded.

- Load magazines on a closed bolt in most rifles.

- Easy to install.

- No external magazine modifications.

-This block requires you use the factory Magpul locking plate with our block (See picture 1 and 2). 

-The factory Sig Sauer MCX-Spear 7.62x51 comes with the Magpul Gen M3 LR308 20-round magazine. Make sure this is the magazine you're trying to block. This block has only been tested on the magazine in the photos.

*This posting is for the magblock (only) and not for the magazine. We don't currently sell any magazines at all.

Sig Sauer Cross PMAG10 ACIS Pattern Magblock (2 or 5 Round Limiter for Hunting)

Fits the Sig Cross Magpul PMAG10 chambered in .308/7.62x51mm, .227 Fury, and 6.5 Creedmoor 10 round Pmags and will convert them to hold only 2 or 5 rounds for hunting. 

- Load magazines on a closed bolt in most rifles.

- Easy to install. New style block allows you to use the stock locking plate.

- No external magazine modifications.

Magpul Part# for magazine: MAG1169-BLK

*This posting is for the magblock (only) and not for the magazine. We don't currently sell any magazines at all.

GSG-M1911, GSG-922 .22LR 10/15 Magblock 10 Round Limiter

- This block will convert 15 round GSG M-1911, GSG 922 magazines into a 10 round magazine.

- Easy to install without damage to your magazines.

-Installs under the follower of the magazine with the spring tension keeps it in place.

*This posting is for the magblock (only) and not for the magazine. We don't currently sell any magazines at all.