Search results for 'sig'
-
Sig Sauer P226 Mec-Gar Magblock 10/17 (9mm)
Magblock 10 Round Limiter for Sig P226 17 Round Mec-Gar Magazines
This Magblock fits the Sig P226 Mec-Gar 17 round magazines and will limit them to 10 rounds. These blocks are for the Sig Sauer branded magazines made by Mec-gar. These magazines are found on Sig Sauer's website.
- Easy installation at the base of the spring.
- Limits the magazine to 10 rounds of 9mm.
- Held in place with spring tension or can be epoxied for a permanent modification.
- Lightweight, efficient design.
- Made of a super strong, heat resistant, fiber reinforced polymer.
Block used is a Universal Pistol Limiter cut to #17.
$6.59 As low as: $5.95 -
Sig Sauer 550 Magblock 10/20
Magblock 10 Round Limiter for Sig 550 / PE90 20 Round Magazines
- Fits 10 round 5.56mm Sig 550, PE90, SG 550 factory 20 round magazines.
- Easy installation. limiter replaces the original locking plate.
- Limits the magazine to 10 rounds of 5.56mm
- Held in place with spring tension or can be epoxied for a permanent modification.
- Lightweight, efficient design.
- Made of strong, lightweight polymer.
$6.95 As low as: $5.95 -
Sig Sauer P226 X-Five Mec-Gar Magblock 10/20 (9mm)
Magblock 10 Round Limiter for Sig P226 20 Round Mec-Gar Magazines
This Magblock fits the Sig P226 X-Five Mec-Gar 20 round magazines (With aluminum addition as shown) made by Mec-Gar and will limit them to 10 rounds.
- Easy installation at the base of the spring.
- Limits the magazine to 10 rounds of 9mm.
- Held in place with spring tension or can be epoxied for a permanent modification.
- Lightweight, efficient design.
- Made of a super strong, heat resistant, fiber reinforced polymer.
Block used is a Universal Pistol Limiter cut to #22.
$6.59 As low as: $5.95 -
Sig Sauer Gen 2 MPX Magblock 10/20 (9mm)
Magblock 10 Round Limiter for Sig Gen 2 MPX 9mm 20 Round Magazines
- Fits 20 round 9mm Sig MPX factory magazines.
- Limits the magazine to 10 rounds of 9mm
- Held in place with spring tension or can be epoxied for a permanent modification.
- Lightweight, efficient design.
- Made of a super strong, heat resistant, fiber reinforced polymer.-This block will ONLY work in the new Sig MPX 20-round magazine pictured below.
$7.49 As low as: $5.95 -
Sig Sauer MecGar P228 Magblock 10/18 (9mm)
Magblock 10 Round Limiter for MecGar Sig P228 18 Round Magazines
- Fits 18 round 9mm MecGar Sig P228 magazines with the +3 extension.
- Easy installation at the base of the spring.
- Limits the magazine to 10 rounds of 9mm.
- Held in place with spring tension or can be epoxied for a permanent modification.
- Lightweight, efficient design.
- Made of a super strong, heat resistant, fiber reinforced polymer.$6.59 As low as: $5.95 -
Sig P320-380 10/12 Magblock (.380)
Magblock 10 Round Limiter for Sig P320 .380 auto12 Round Magazines
- Fits 12 round .380 auto Factory Sig P320 magazines.
- Save time and money with a simple install.
- Easy installation at the base of the spring, with the bottom of the block locking into the base locking plate.
- Limits the magazine to 10 rounds of 9mm.
- Held in place with spring tension or can be epoxied for a permanent modification where required to be legal.
- Lightweight, efficient design.
- Made of a super strong, heat resistant, fiber reinforced polymer.$6.59 As low as: $5.95 -
Sig P322 Magblock 10/25 (22LR)
Sig Sauer P322 .22LR 10/25 Magblock 10 Round Limiter
- This block will convert 25 round Sig P322 .22LR magazines into a 10 round magazine.
- Easy to install without damage to your magazines.
-Installs at the base of the magazne.
$7.49 As low as: $6.50 -
Sig Sauer MecGar P228 Magblock 10/15 (9mm)
Magblock 10 Round Limiter for MecGar Sig P228 15 Round Magazines
- Fits 15 round 9mm MecGar Sig P228 magazines.
- Easy installation at the base of the spring.
- Limits the magazine to 10 rounds of 9mm.
- Held in place with spring tension or can be epoxied for a permanent modification.
- Lightweight, efficient design.
- Made of a super strong, heat resistant, fiber reinforced polymer.$6.59 As low as: $5.95 -
Sig Sauer P365 X-Macro, Tacops, Legion Magblock (9mm)
Magblock 10 Round Limiter for Sig P365 XMacro 17 Round Magazines
- Fits 17 round 9mm Factory Sig P365XMacro magazines.
- Save time and money with a simple install.
- Easy installation at the base of the spring.
- Limits the magazine to 10 rounds of 9mm.
- Held in place with spring tension or can be epoxied for a permanent modification where required to be legal.
- Lightweight, efficient design.
- Made of a super strong, heat resistant, fiber reinforced polymer.-This block will works in the X-Macro, Tacops, and P365-AXG Legion 17-round magazines.
$6.95 As low as: $5.95 -
Sig Sauer 1911 Magblock 10/12 (.22LR)
Sig Sauer 1911 (.22LR) Magblock 10 Round Limiter
- Fits 12 round .22 Sig Sauer 1911 magazines.
- Easy installation. See photos.
- Limits the magazine to 10 rounds of .22
- Held in place with spring tension or can be epoxied for a permanent modification.
- Lightweight, efficient design.*Please click on photos for installation instructions.
$6.59 As low as: $5.95 -
Sig Sauer P320 X-Ten, Compact Magblock 10/15 (10mm)
Sig Sauer P320 X-Ten 10mm Magblock 10 Round Limiters for 15 Round Magazine
- Fits 15 round 10mm Sig P320 X-Ten 10mm magazines.
- Limits the magazine to 10 rounds of 10mm.
- Held in place with spring tension or can be epoxied for a permanent modification.
- Lightweight, efficient design. - Tested with factory Sig Sauer X-Ten 10mm 15 round magazine*Please click on photos at left for installation instructions. New design installs at the base of the spring and sits on top of the original locking plate.
This block will for for the new X-Ten Compact too
$6.59 As low as: $5.95 -
Sig Sauer MPX 10/35 Magblock (9mm)
Magblock 10 Round Limiter for Sig MPX 9mm 35 Round Magazines
- Fits 35 round 9mm Sig MPX factory magazines.
- Easy installation by inserting the block at the base. This block replaces the factory locking plate.
- Limits the magazine to 10 rounds of 9mm
- Held in place with spring tension or can be epoxied for a permanent modification.
- Lightweight, efficient design.
$7.49 As low as: $5.95 -
Sig Sauer P320 Magblock 10/30 (9mm)
New Magblock 10 Round Limiter for Sig P320 30 Round Magazines
- Fits 30 round 9mm Factory Sig P320 amagazines.
- Easy installation at the base of the spring.
- Limits the magazine to 10 rounds of 9mm.
- Held in place with spring tension or can be epoxied for a permanent modification.
- Lightweight, efficient design.$8.95 As low as: $6.95 -
Sig P322 Magblock 10/20 (22LR)
Sig Sauer P322 .22LR 10/20 Magblock 10 Round Limiter
- This block will convert 20 round Sig P322 .22LR magazines into a 10 round magazine.
- Easy to install without damage to your magazines.
-Installs at the base of the magazne.
$7.49 As low as: $6.50 -
Sig Sauer P227 Magblock 10/14 (.45)
Magblock 10 Round Limiter for Sig P227 (.45) 14 Round Magazines
- Fits 14 round .45 Sig P227 magazines. (13+2 extension)
- Easy installation at the base of the spring.
- Limits the magazine to 10 rounds of .45
- Held in place with spring tension or can be epoxied for a permanent modification.
- Lightweight, efficient design.$6.59 As low as: $5.95