Search results for 'rad lock'
-
Magblock Locking Plate for Magpul Pmag
MagazineBlocks LLC locking plate for Magpul PMAG .223/ 5.56 magazines. Fits 10, 20, and 30 round Pmags. This is our brand locking plate since we are sold out of originals. Works the same. Choose Generation of your magazines below: Gen M3 will state this on the side. If you don’t see it then you have Gen 2 / /MOE pmags.$4.00 -
Panzer Arms MKA1919 AR-12 Magblock 5/10 (12ga)
Magblock for Panzer Arms MKA1919 AR-12 5 Round Limiter for 10 Round Magazines (12ga)
- Fits Panzer Arms 10 round magazines and will limit them to 5 rounds.
- Fits at the base of the magazine. This block will replace the factory locking plate.
$6.95 -
Grand Power Stribog 10/20 Magblock (9mm)
This block will work with 20 round 9mm Grand Power Stribog magazines to make a 10 round magazine. Block allows you to use the stock locking plate.
$7.49 As low as: $5.95 -
ETS H&K VP9 & P30 Magblock 10/17 (9mm)
Magblock 10 Round Limiter for ETS Heckler & Koch VP9 9mm
- Fits 17 round 9mm ETS (Elite Tactical Systems) H&K VP9 magazines.
- Limits the magazine to 10 rounds of 9 mm
- Easy installation into the follower as shown in the photos.
- New, Improved design.
- Lightweight, efficient design.$5.95 As low as: $4.75 -
TAPCO AK-47 10/30 Magblock
Magblock for Tapco AK47 10/30, 10/20. 15/30 Limiter (7.62x39mm)
- This block fits the Tapco 30 round AK47 magazines 7.62x39mm and will convert them to a 10 round magazine.
- Replaces the lower locking plate for an easy and secure install.
- Also marked where to cut to make 10 round blocks for the 20 round Tapco AK magazines.
- Now marked where to cut for a 15 round limiter for 30 round Tapco Magazines.
$7.49 As low as: $5.95 -
Taurus TX-22 Compact Magblock 10/13 (.22LR)
Taurus TX-22 Compact (.22LR) Magblock 10 Round Limiter for 13 Round Magazine.
- Fits 13 round Taurus TX-22 Compact magazines.
- Easy installation by replacing the locking plate. See photos.
- Limits the magazine to 10 rounds of .22
- Held in place with spring tension or can be epoxied for a permanent modification.
- Lightweight, efficient design.$6.59 As low as: $5.95 -
Chinese Norinco AK-47 10/30 Magblock (7.62)
Magblock for Chinese Norinco AK47 (7.62x39mm) Magazines.
- This block fits the Norinco 30 round AK47 magazines in 7.62x39mm and will convert them to a 10 round magazine.
- Replaces the lower locking plate for an easy and secure install.
Want to upgrade to the best stainless steel AK replacement springs available? See our upgrade springs here: LINK
$7.49 As low as: $5.95 -
WBP AK-556 10/30 Magblock (5.56x45)
Polish WBP AK-556 Magblock for 5.45x45mm 30 round magazines
- This AK-74 block fits most 30 round polymer 5.45x45 mm magazines and will convert them to hold only 10 rounds.
- The new design features a spring catch which will allow an easy attachment point to the spring.
- This prevents the block making noise and epoxy can be added at this point to make it permanent.
- This block will replace the original magazine locking plate.
-This magazineblock is made using our "New" Universal AK kits cut to #36+sides sanded.
$7.49 As low as: $6.49 -
Korean Steel AK47 10/30 MagBlock (7.62)
Magblock for South Korean Steel AK47 (7.62x39mm) Magazines.
- This block fits the S. Korean Steel 30 round AK47 magazines in 7.62x39mm and will convert them to a 10 round magazine.
- Replaces the lower locking plate for an easy and secure install.
Want to upgrade to the best stainless steel AK replacement springs available? See our upgrade springs here: LINK
$7.49 As low as: $5.95 -
XTECH Tactical AK-47 10/30 Magblock (7.62)
Magblock for X-Tech Tactical AK47 (7.62x39mm) Magazines.
- This block fits the XTECH Tactical 30 round AK47 magazines in 7.62x39mm and will convert them to a 10 round magazine.
- Replaces the lower locking plate for an easy and secure install.
Want to upgrade to the best stainless steel AK replacement springs available? See our upgrade springs here: LINK
$7.49 As low as: $5.95 -
CIRCLE 11 AK47 10/30 Magblock Limiter (7.62)
Circle 11 AK47 10 and 15 Round Magblock Limiter
This block fits the Circle 11 30 round AK47 magazines and will convert them to a 10 round magazine.
-Replaces the lower locking plate.
-Works on Circle 11 7.62x39mm AK magazines.
Note: This block is made from our Universal AK Kits cut to #39 using a square locking plate.
$7.49 As low as: $5.95 -
Atlas Gunworks 120mm Slidelock 10/16 Magblock (9mm)
Magblock 10 Round Limiter for Atlas Gunworks Slidelock 120mm 16 Round 9mm Magazines
- Fits 18 round 9mm Factory Atlas Gunworks 120 mm magazines.
- Easy installation into the follower of the magazine.
- Limits the magazine to 10 rounds of 9mm.
- Held in place with spring tension or can be epoxied for a permanent modification.
- Lightweight, efficient design.
- Only fits the Slidelock (lock-back) follower style magazines. See pictures below of a Slidelock follower.$6.95 As low as: $5.95 -
THRIL GEN 2 MPX 10/35 Magblock (9mm)
Magblock 10 Round Limiter for THRIL GEN 2 SM9 MPX 9mm 35 Round Magazines
- Fits 35 round 9mm MPX THRIL GEN 2 magazines.
- Easy installation by inserting the block at the base. This block replaces the factory locking plate.
- Limits the magazine to 10 rounds of 9mm
- Held in place with spring tension or can be epoxied for a permanent modification.
- Lightweight, efficient design.
$7.49 As low as: $5.95 -
AK Tanker 10/20 Magblock (7.62)
Tanker AK47 10/20 Magblock
This block fits the Tanker 20 round AK47 magazines and will convert them to a 10 round magazine.
-Replaces the lower locking plate.
-Works on Korean surplus magazines.
$7.49 As low as: $5.95 -
AC-Unity MP5 10/40 Magblock (9mm)
Magblock 10 Round Limiter for AC-Unity MP5 9mm 40 Round Magazines
- Fits 40 round 9mm AC-Unity MP5 style magazines.
- Limits the magazine to 10 rounds of 9mm
- Held in place with spring tension or can be epoxied for a permanent modification.
- Lightweight, efficient design.NOTE: This block is designed for the AC-Unity MP5 Magazines.
$7.95 As low as: $6.95