Search results for 'm&p'
-
M&P Shield Plus 30 Super Carry 10/16 Magblock
Smith & Wesson M&P Shield Plus 30 Super Carry 10 Round Limiter
- Fits 16 round 9mm M&P Shield Plus magazines chambered in 30 Super Carry.
- Easy installation at the base of the spring.
- Limits the magazine to 10 rounds of 30 Super Carry.
- Held in place with spring tension or can be epoxied for a permanent modification.
- Lightweight, efficient design.$6.59 As low as: $5.95 -
M&P SHIELD PLUS & EQUALIZER 10/15 Magblock (9mm)
Smith & Wesson M&P Shield Plus, Equalizer 9mm Magblock 10 Round Limiter
- Fits 15 round 9mm M&P Equalizer/Shield Plus magazines.
- Easy installation at the base of the spring.
- Limits the magazine to 10 rounds of 9 mm.
- Held in place with spring tension or can be epoxied for a permanent modification.
- Lightweight, efficient design.$6.59 As low as: $5.95 -
M&P15 .22 Magblock Limiter 10/25 (.22LR)
M&P15 .22LR 10/25 Magblock 10 Round Limiter
- This block will convert 25 round M&P15 .22LR magazines into a 10 round magazine.
- Easy to install without damage to your magazines.
- Replaces the original locking plate.
$6.95 As low as: $5.95 -
ZENITH MP5 10/30 Magblock (9mm)
Magblock 10 Round Limiter for Zenith ZF-5 MP5 9mm 30 Round Magazines
- Fits 30 round 9mm Zenith MP5 style magazines.
- Limits the magazine to 10 rounds of 9mm
- Held in place with spring tension or can be epoxied for a permanent modification. (Follower insert requires epoxy or silicone to securely hold in place).
- Lightweight, efficient design.NOTE: This block is designed for the Zenith ZF-5 MP5 Stye magazines only. This block is longer then the standard H&K MP5 Magblock and won't work in the HK MP5 factory magazines.
$7.95 As low as: $6.95 -
S&W M&P 22 Magnum 10/30 Magblock (.22WMR)
Smith & Wesson M&P 22 Magnum Magblock 10 Round Limiters
- Fits 30 round .22 Magnum M&P magazines.
- New design installs at the base of the magazine and is held in place with spring tension. You will use the factory locking plate.
- Limits the magazine to 10 rounds of 22 magnum.
- Held in place with spring tension or can be epoxied for a permanent modification.
- Lightweight, efficient design. - Tested with factory S&W 30 Round M&P 22 Magnum Magazines.$6.95 As low as: $5.95 -
Smith & Wesson M&P FPC, 2.0 Magblock 10/23 (9mm)
Smith & Wesson M&P FPC, 2.0 9mm Magblock 10 Round Limiters
- Fits 23 round 9mm M&P FPC (Folding Pistol Caliber Carbine) magazines.
- Will also fit 2.0 models
- New design installs at the base of the spring.
- Limits the magazine to 10 rounds of 9mm.
- Held in place with spring tension or can be epoxied for a permanent modification.
- Lightweight, efficient design. - Tested with factory S&W Magazines.*Please click on photos at left for installation instructions. New design installs at the base of the spring and sits on top of the original locking plate..
$6.95 As low as: $5.95 -
Smith & Wesson M&P Five-Seven 10/22 Magblock (5.7x28)
Smith & Wesson M&P Five-Seven Magblock 10 & 15 Round Limiter
- Fits 22 round 5.7 mm S&W M&P 5.7 magazines.
- Easy installation at the base of the spring.
- Limits the magazine to 10 rounds of 5.7 mm.
- Held in place with spring tension or can be epoxied for a permanent modification.
- Lightweight, efficient design.$6.95 As low as: $5.95 -
S&W M&P 2.0 10mm Magblock 10/15 (10mm)
Smith & Wesson M&P 2.0 10mm Magblock 10 Round Limiters
- Fits 15 round 10mm M&P magazines.
- Limits the magazine to 10 rounds of 10mm.
- Held in place with spring tension or can be epoxied for a permanent modification.
- Lightweight, efficient design. - Tested with factory S&W Magazines M&P 10mm-This block will fit standard, 2.0, and Performace Center 15-round 10mm magazines
*Please click on photos at left for installation instructions. New design installs at the base of the spring and sits on top of the original locking plate.
$6.59 As low as: $5.95 -
S&W M&P SHIELD PLUS, EQUALIZER 10/13 Magblock (9mm)
Smith & Wesson M&P Shield Plus, Equalizer 9mm Sub-Compact Magblock 10 Round Limiter
- Fits 13 round 9mm M&P Shield Plus magazines.
- Easy installation at the base of the spring.
- Limits the magazine to 10 rounds of 9 mm.
- Held in place with spring tension or can be epoxied for a permanent modification.
- Lightweight, efficient design.$6.59 As low as: $5.95 -
S&W M&P Full Size 10/14 Magblock (.45)
Smith & Wesson M&P .45 Magblock 10 Round Limiters
- Fits 14 round .45ACP M&P magazines.
- New design installs at the base of the spring with the "L" shape of the spring going through the block.
- Limits the magazine to 10 rounds of .45.
- Held in place with spring tension or can be epoxied for a permanent modification.
- Lightweight, efficient design. - Tested with factory S&W Magazines M&P .45acp*Please click on photos at left for installation instructions. New design installs at the base of the spring and sits on top of the original locking plate.
*Universal Pistol Limiter Instructions: Cut to #16+hole and glue flush at the bottom for 10/14 limiter. Slide lock is not used. When epoxy cures assemble magazine. The two parts of the universal limiter must be glued flush to prevent the locking plate from causing the limiter to shift sideways. #16 will show in the limiter window notch like in the photos.
$6.59 As low as: $5.95 -
S&W M&P 2.0 Magblock 10/13 (.40)
Smith & Wesson M&P .40 2.0 Magblock 10 Round Limiter for 13 Round Magazines
- Fits 13 round .40 M&P 2.0 Magazines.
- Easy installation on top of the locking plate.
- Limits the magazine to 10 rounds of .40
- Held in place with spring tension or can be epoxied for a permanent modification.
- Lightweight, efficient design.*Will only fit 2.0 version.
*Universal Limiter Instructions: Cut to #5 and glue flush at the bottom for 10/13 limiter. Slide lock is not used. When epoxy cures assemble magazine. The two parts of the universal limiter must be glued flush to prevent the locking plate from causing the limiter to shift sideways. #5 will show in the limiter window notch.
Attention: Smith and Wesson has just recenlty changing their locking plate/floor plate design. You will need to determine which type you have. Please see pictures below.
$6.59 As low as: $5.95 -
S&W M&P 2.0 Full Size 10/15 Magblock (9mm)
Smith & Wesson M&P Full Size 9mm Magblock 10 Round Limiters
- Fits 15 round 9mm M&P full size magazines. (Identified by extra spring coils at the base)
- New design installs at the base of the spring.
- Limits the magazine to 10 rounds of 9mm.
- Held in place with spring tension or can be epoxied for a permanent modification.
- Lightweight, efficient design. - Tested with factory S&W 15 Round Magazines.*Please click on photos at left for installation instructions. New design installs at the base of the spring and sits on top of the original locking plate.
*Universal Pistol Limiter Instructions: Cut to #14 and glue flush at the bottom for 10/15 limiter. Slide lock is not used. When epoxy cures assemble magazine. The two parts of the universal limiter must be glued flush to prevent the locking plate from causing the limiter to shift sideways. #14 will show in the limiter window notch like in the photos.
$6.59 As low as: $5.95 -
Smith & Wesson M&P 2.0 Magblock 10/15 (.40)
Smith & Wesson M&P .40 2.0 Magblock 10 Round Limiter
- Fits 15 round .40 M&P 2.0 Magazines.
- Easy installation on top of the locking plate.
- Limits the magazine to 10 rounds of .40
- Held in place with spring tension or can be epoxied for a permanent modification.
- Lightweight, efficient design.*Will only fit 2.0 version. Other versions require a shlightly shorter limiter.
*Universal Limiter Instructions: Cut to #9 and glue flush at the bottom for 10/15 limiter. Slide lock is not used. When epoxy cures assemble magazine. The two parts of the universal limiter must be glued flush to prevent the locking plate from causing the limiter to shift sideways. #9 will show in the limiter window notch like in the photos.
Attention: Smith and Wesson has just recently changed their locking plate/floor plate design. You will need to determine which type you have. Please see pictures below.
$6.59 As low as: $5.95 -
S&W M&P 2.0 Compact Magblock 10/15 (9mm)
Smith & Wesson M&P 2.0 Compact Magblock 10/15 Limiter
This Magblock fits the Smith & Wesson M&P 2.0 15 round 9mm magazines and will limit them to 10 rounds. New design easily installs at the base of the spring. It is held in place with spring tension alone or can be glued or epoxied if desired. Block comes ready to install.
*If using our Universal Limiter for this magazine: Cut to #9-10 and glue flush at the bottom for 10/15 limiter. Slide lock is not used. When epoxy cures assemble magazine. #9-10 will show in the limiter window notch like in the photos.
Attention: Smith and Wesson has just recenlty changing their locking plate/floor plate design. You will need to determine which type you have. Please see pictures below.
$6.59 As low as: $5.95 -
Smith & Wesson M&P Subcompact 2.0 Magblock 10/12 (9mm)
Smith & Wesson M&P 9 mm Compact Magblock 10 Round Limiter
- Fits 12 round 9mm M&P and M&P 2.0 Subcompact magazines.
- Easy installation at the base of the spring.
- Limits the magazine to 10 rounds of 9 mm.
- Held in place with spring tension or can be epoxied for a permanent modification.
- Lightweight, efficient design.$6.59 As low as: $5.95