Search results for 'glock 19'

Glock 19X Magblock 10/19 (9mm)

This Magblock fits the Glock 19X magazines with the +2 extended base. (19 round magazines)  and will limit them to 10 rounds.  

- This is a 2 part limiter. It is a -17 round limiter under the follower, then a -2 adapter to limit the extended floorplate.

- Easily installed in seconds. It is held in place with spring tension alone or can be glued or epoxied if desired.

-Simple install to make 10/19 Glock 19X magazines.

-No modification to the magazine is required.

-Lightweight and will not interfere with magazine reliability.

PATENT # 9328982 B2, Additional Patents Pending

* Please click the photos for installation instructions. Fits newer generation full metal lined Glock Magazines.
Only compatible with the follower type shown in the pictures. 

 

Glock 17 and Glock 34 (9mm) Magblock

- Fits 17 round 9mm Factory Glock 17, Glock 19X and Glock 34 magazines.  *See details on correct follower types below. 
-Will also fit Korean Glock Magazines.  
- Easy installation under the magazine follower.
- Limits the magazine to 10 rounds of 9mm. 
- Held in place with spring tension or can be epoxied for a permanent modification. 
- Lightweight, efficient design. 

* Please click the photos for installation instructions. Fits newer generation full metal lined Glock Magazines.
Only compatible with the follower type shown in the pictures. 

New patent pending design allows this limiter to be adapted to fit all other Glock 9mm and .40 magazines including a 15 round option for the Glock 17 magazine. Cutting using an appropriate tool is required. Pre-cut limiters are available.

Glock 19 (9mm) Magblock (For Older Style Followers Only)

- Fits 15 round 9mm Foctory Glock 19 magazines.  *See details on correct follower types below. 
- Easy installation under the magazine follower.
- Limits the magazine to 10 rounds of 9mm. 
- Held in place with spring tension or can be epoxied for a permanent modification. 
- Lightweight, efficient design. 

* Please click the photos for installation instructions. Fits older style follower Glock Magazines only.
Only compatable with the follower type shown in the pictures. 

Glock 19 (9mm) Magblock

- Fits 15 round 9mm Foctory Glock 19 magazines.  *See details on correct follower types below. 
-Will also fit Korean Glock Magazines.  
- Easy installation under the magazine follower.
- Limits the magazine to 10 rounds of 9mm. 
- Held in place with spring tension or can be epoxied for a permanent modification. 
- Lightweight, efficient design. 

* Please click the photos for installation instructions. Fits newer generation full metal lined Glock Magazines.
Only compatible with the follower type shown in the pictures. If you have older followers we offer a different product. 

-These will work in the SGM Tactical Glock19 magazine.

-Will work in the "Gen5 Magazines"

-Block is cut slighly short to accomdate Gen5 Glock 19 followers. 

Amend2 Glock 19 (9mm) Magblock

- Fits 15 round 9mm Amend2 Glock 19 magazines.  
- Easy installation at the base of the magazine.
- Limits the magazine to 10 rounds of 9mm. 
- Held in place with spring tension or can be epoxied for a permanent modification. 
- Lightweight, efficient design. 

 

 

ETS Glock 9mm Magblock 10 Round Limiter for 15 round Magazines

This Magblock fits the ETS 15 round 9mm magazines for Glocks and will limit them to 10 rounds.  Easily installed in seconds at the base of the magazine. It is held in place with spring tension alone or can be glued or epoxied if desired for a permanent modification where required. (Epoxy sold separately). 

- Simple install to make 10/15 Glock 9mm magazines.
- No modification to the magazine is required.
- Lightweight and will not interfere with magazine reliability.
- Fits ETS magazines like the one pictured.

ATTENTION: This block is designed for the ETS Glock19 15 round magazine only.

 

AC-Unity Glock 19 (9mm) Magblock

- Fits 15 round 9mm AC Unity Glock 19 Magazines.  
- Easy installation at the base of the magazim.
- Limits the magazine to 10 rounds of 9mm. 
- Held in place with spring tension or can be epoxied for a permanent modification. 
- Lightweight, efficient design. 

 

ETS Glock .40 Magblock 10 Round Limiter for 19 round Magazines

This Magblock fits the ETS 19 round .40 magazines for Glocks and will limit them to 10 rounds.  Easily installed in seconds at the base of the magazine. It is held in place with spring tension alone or can be glued or epoxied if desired for a permanent modification where required. (Epoxy sold separately). 

- Simple install to make 10/19 Glock .40 magazines.
- No modification to the magazine is required.
- Lightweight and will not interfere with magazine reliability.
- Fits ETS magazines like the one pictured.

 *This block is designed for the ETS Glock .40 19 round magazine only. If used in other magazines it might need to be modified. 

Glock 21 (.45) Magblock

- Fits 13 round .45 caliber Glock 21 and 41 magazines.  *See details on correct follower types below. 
-Will also fit Korean Glock Magazines.  
- Easy installation under the magazine follower.
- Limits the magazine to 10 rounds of .45 caliber ammunition. 
- Held in place with spring tension or can be epoxied for a permanent modification. 
- Lightweight, efficient design. 

* Please click the photos for installation instructions. Fits newer generation full metal lined Glock Magazines.
Only compatible with the follower type shown in the pictures. 

* Uses a cut off Glock Limiter. The end will not end on a rib, so is not as smooth of a cut, but works great. 

Glock Magazine Spring 11 Coil Replacements

 

Compatable with the following magazines: 

- Fits 19 round G17, G18, G34, and G22 magazines

-  Will fit Glocks 22, 31, 35, 37 newer mags. 

- Can be cut down to fit 17 round G17 magazines. 

ETS Glock 9mm Magblock 10 Round Limiter for 31 round Magazines

This Magblock fits the ETS 31 round 9mm magazines for Glocks and will limit them to 10 rounds.  Easily installed under the follower of the magazine. It is held in place with spring tension alone or can be glued or epoxied if desired for a permanent modification where required. (Epoxy sold separately). 

- Simple install to make 10/31 Glock 9mm magazines.
- No modification to the magazine is required.
- Lightweight and will not interfere with magazine reliability.
- Fits ETS magazines like the one pictured.

 

 

Epoxy Fast Setting

Hardman Double Bubble Pouch (4.0 grams). Will work for a few rifle or up to 5-10 pistol limiters depending on amount used.
Features:
- Starts to set in only 3- 5 minutes. Mix small batches if doing a lot of limiters.
- Handling strength: 15-30 minutes.
- Color: white.
- Viscosity: honey.
- Full Strength: 24 hours

4.0 Grams.

Magblock 10 Round Limiter for Remington RP9 9mm magazines

- Fits 18 round 9mm Remingto RP9 magazines. 
- Easy installation at the base of the spring.
- Limits the magazine to 10 rounds of 9mm. 
- Held in place with spring tension or can be epoxied for a permanent modification. 
- Lightweight, efficient design. 
- Made of a super strong, heat resistant, fiber reinforced polymer.

*** Tested on factory Remington RP9 9mm double stack magazines which use a locking plate at the base. The block may need to be modified to work with magazines from other manufactures or sizes. If your magazines do not have a plastic locking plate that sits on top ot the floor plater then they will not work. 

 

Taurus PT92, PT99, PT917, and PT917C Magblock 10/17 (9mm) 10 Round Limiter

This Magblock fits the factory Taurus PT92, PT99, PT917, and PT917C 17 round 9mm magazines and will limit them to 10 rounds. Easily installed in seconds at the base of the magazine. It is held in place with spring tension alone or can be glued or epoxied if desired.

- Simple install to make 10/17 Taurus PT92, PT99, PT917 magazines.
- No modification to the magazine is required.
- Lightweight and will not interfere with magazine reliability.
- Works on original factory Taurus PT92, PT99, PT917, PT917C magazines as shown in the photos. Other types of magazines may require modification of the limiter.

Please click on photos for installation instructions.