Search results for '9mm'
-
AR-9mm 10/32 ProMag Block
- Converts 9mm AR-15 32 round magazine to 10 rounds.
- This block will work with 9mm AR-15 magazines made by ProMag only.
- It replaces the lower floor plate.
- The spring can also be epoxied to the block which allows for disassembly and cleaning.
- We have a separate block available for UZI, C-Products, and ASC 32 round magazines. This one only fits Promag magazines.
$6.95 As low as: $5.95 -
ETS Glock 9mm 10/32 Round Limiter (9mm)
ETS Glock 9mm Magblock 10 Round Limiter for 32 round Magazines
This Magblock fits the ETS 32 round 9mm magazines for Glocks and will limit them to 10 rounds. Easily installed under the follower of the magazine. It is held in place with spring tension alone or can be glued or epoxied if desired for a permanent modification where required. (Epoxy sold separately).
- Simple install to make 10/32 Glock 9mm magazines.
- No modification to the magazine is required.
- Lightweight and will not interfere with magazine reliability.
- Fits ETS magazines like the one pictured.*This block is designed for the ETS 32 Glock magazines only. If used in other magazines it might need to be modified.
$6.95 As low as: $5.95 -
Springfield XD 9mm 10/16 Magblock (9mm)
Springfield XD 9mm Magblock
- Fits 16 round XD and XD Mod 2 9mm magazines.
- Easy installation under the magazine follower.
- Limits the magazine to 10 rounds of 9mm.
- Held in place with spring tension or can be epoxied for a permanent modification.
- Lightweight, efficient design.
$6.50 As low as: $5.95 -
Springfield XDM 9mm Magblock 10/19 (9mm)
Springfield XDM 9mm Magblock
- Fits 19 round 9mm XDM magazines.
- Easy installation under the magazine follower.
- Limits the magazine to 10 rounds of 9mm.
- Held in place with spring tension or can be epoxied for a permanent modification.
- Lightweight, efficient design.-This block will work in the 19-round Elite, X-DM Elite OSP 9mm magazines.
Springfield XDM 9mm Magblock
$6.50 As low as: $5.95 -
H&K P713 9mm Magblock 10/13 Magblock
Magblock 10 Round Limiter for Heckler & Koch P7M13 9mm
- Fits 13 round 9mm H&K P7M13 magazines.
- Limits the magazine to 10 rounds of 9 mm
- Easy installation under the follower as shown in the photos.
- Lightweight, efficient design.-This block will work in P7M10 .40S&W marked magazines.
$6.95 -
S&W CSX 9mm 10/12 Magblock
Smith & Wesson CSX 9mm Magblock 10 Round Limiters
- Fits 12 round 9mm CSX magazines.
- New design installs at the base of the spring.
- Limits the magazine to 10 rounds of 9mm.
- Held in place with spring tension or can be epoxied for a permanent modification.
- Lightweight, efficient design. - Tested with factory S&W 12 Round CSX Magazines.$6.59 As low as: $5.95 -
Sig Sauer P224 (9mm) 10/12 Magblock
Magblock 10 Round Limiter for Sig P229 and P226 12 Round .40 Magazines.
- Fits the new 12 round .40 Factory Sig P229 and P226 magazines.
- Easy installation at the base of the spring.
- Limits the magazine to 10 rounds of .40
- Held in place with spring tension or can be epoxied for a permanent modification.
- Lightweight, efficient design.
- Made of a super strong, heat resistant, fiber reinforced polymer.$6.59 As low as: $5.95 -
CheckMate 2011 - 126mm Magblock (9mm)
Magblock 10 Round Limiter for Checkmate 126mm 17 Round 9mm Magazines
- Fits 17 round 9mm Factory Checkmate 2011 126 mm magazines.
- Easy installation into the follower of the magazine.
- Limits the magazine to 10 rounds of 9mm.
- Held in place with spring tension or can be epoxied for a permanent modification.
- Lightweight, efficient design.
- Only fits the floor plates shown. May need sanding shorter if your magazines have a floorplate locking plate.*Note: This block will work in Staccato 126mm-17rd G3 magazines.
$6.95 As low as: $5.95 -
Springfield XD/XDM Compact 9mm 10/13 (9mm)
Springfield XD and XDM Compact 9mm Magblock
- Fits 13 round 9mm XD and XDM Compact magazines.
- Easy installation under the magazine follower.
- Limits the magazine to 10 rounds of 9mm.
- Held in place with spring tension or can be epoxied for a permanent modification.
- Lightweight, efficient design.$6.50 As low as: $5.95 -
Steyr SPP 10/15 Magblock (9mm)
Magblock 10 Round Limiter for Steyr SPP 15 Round Magazines
- Fits 15 round 9mm Steyr SPP factory magazines
- Easy installation at the base of the spring.
- Limits the magazine to 10 rounds of 9mm.
- Held in place with spring tension or can be epoxied for a permanent modification.
- Lightweight, efficient design.$6.95 As low as: $5.95 -
Glock 17 Magblock 10/17 (9mm) for Older Style Follower
Glock 17 (9mm) Magblock (For Older Style Followers Only)
- Fits 17 round 9mm Foctory Glock 17 magazines. *See details on correct follower types below.
- Easy installation at the base of the magazine.
- Limits the magazine to 10 rounds of 9mm.
- Held in place with spring tension or can be epoxied for a permanent modification.
- Lightweight, efficient design.* Please click the photos for installation instructions. Fits older style follower Glock Magazines only.
Only compatable with the follower type shown in the pictures.$6.59 As low as: $5.95 -
Springfield Echelon 10/15 Magblock (9mm)
Springfield Echelon 9mm 10/15 Magblock
- Fits 15 round 9mm Echelon Factory magazines.
- Easy installation under the magazine follower.
- Limits the magazine to 10 rounds of 9mm.
- Held in place with spring tension or can be epoxied for a permanent modification.
- Lightweight, efficient design.Springfield Echelon 9mm Magblock - This block is designed for the factory 15-round magazine, only.
$6.50 As low as: $5.95 -
Kimber KDS9c Magblock 10/15 (9mm)
Magblock 10 Round Limiter for Kimber KDS9c (9mm) 15 Round Magazines
- Fits 15 round Kimber KDS9C 9mm magazines
- Easy installation at the base of the magazine - Limits the magazine to 10 rounds of 9mm.
- Held in place with spring tension or can be epoxied for a permanent modification.
- Lightweight, efficient design. - Made of a super strong, heat resistant, fiber reinforced polymer. - Tested on Kimber KDS9c 15 round magazine.$6.59 As low as: $5.95 -
FN Reflex Magblock 10/15 (9mm)
Magblock 10 Round Limiter for FN Reflex 15 Round Magazines
- Fits 15 round 9mm FN Reflex magazines.
- Easy installation under the follower.
- Limits the magazine to 10 rounds of 9mm.
- Held in place with spring tension or can be epoxied for a permanent modification.
- Lightweight, efficient design.
- Made of a super strong, heat resistant, fiber reinforced polymer.$6.59 As low as: $5.95 -
FN Reflex Magblock 10/11 (9mm)
Magblock 10 Round Limiter for FN Reflex 11 Round Magazines
- Fits 11 round 9mm FN Reflex magazines.
- Easy installation under the follower.
- Limits the magazine to 10 rounds of 9mm.
- Held in place with spring tension or can be epoxied for a permanent modification.
- Lightweight, efficient design.
- Made of a super strong, heat resistant, fiber reinforced polymer.$6.59 As low as: $5.95