Magblock 5 Round Limiter for Pmag 10 GL9 Magazines.

- Fits 10 round Magpul Pmag GL9 magazines for Glock 19.

- Easy installation at the base of the magazine and sits on top of the locking plate.
- Limits the magazine to 5 rounds of 9mm. 
- Held in place with spring tension or can be epoxied for a permanent modification. 
- Lightweight, efficient design. 

* Please click the photos for installation instructions. Fits Magpul Pmag 10 GL9 Magazines Only. Will not fit standard Glock type Magazines.

Universal Limiter Instructions: To make this limiter using the universal pistol limiter, cut the base flush with #6 showing in the indicator notch. 

Magblock 10/30 MCL (Magazine Capacity Limiter) for Magpul 30 round Steyr Aug Pmags in .223/5.56mm.

- This block will replace the lower spring attachment point  or locking plate and convert a 30 round magazine to hold only 10 rounds.

- The Pmag dust covers will still fit when loaded.

- Magazines can be loaded with the bolt closed.

- Does not affect reliability.

- No increase in spring pressure. 

10 Round Limiter for Gen M3 40 Round Pmags

Magblock 10/40 MCL (Magazine Capacity Limiter) for Magpul 40 round Gen M3 Pmags in .223/5.56mm. 

- This block will replace the lower spring attachment point or locking plate and convert a 40 round magazine to hold only 10 rounds.

- Includes 2 part limiter for extra height.

- Magazines can be loaded with the bolt closed.

- Does not affect reliability.

- Compatible with the 40 round Magpul Gen 3 Pmags only.

Magblock 10/20 MCL (Magazine Capacity Limiter) for Magpul 20 round Gen M3 Pmags in .223/5.56mm.

- Fits NEW Gen M3 Pmag 20  (Curved body)

- This block will replace the lower spring attachment point  or locking plate and convert a 20 round magazine to hold only 10 rounds.

- The Pmag dust covers will still fit when loaded.

- Magazines can be loaded with the bolt closed in most rifles. Some trimming of the limiter may be required for this.

- Does not affect reliability.

- No increase in spring pressure. 

Magblock 10 Round Limiter for Magpul 30 Round AK-74 Pmag (5.45x39mm)

- This block fits the new Magpul 30 round AK74 magazines and will convert them to hold 10 rounds.

- Replaces the lower locking plate for an easy and secure install.

- Built in spring catch holds the limiter securely in place and prevents noise.

- Made of super strong heat resistant polymer.

Magblock 10 and 15 Round Limiter for Magpul 20 Round AK-47 Pmag (7.62x39mm)

This block fits the new Magpul 20 round AK47 magazines and will convert them to hold 10 rounds.

- Replaces the lower locking plate for an easy and secure install.
- Built in spring catch holds the limiter securely in place and prevents noise.
- Also available as a 10 round limiter for 20 round Pmags and a 15 round option is available.
- Patented design not available anywhere else. 

*Made using out new Universal AK Limiter. If using the universal AK kit to make this limiter, cut so #24.5 shows in the indicator notch and use the Pmag lock insert. The block sold here come pre-cut for this size. 

Upgrade Stainless Steel AK replacement springs available for Pmag AK Magazines! Add to order below for a discount.  See our upgrade springs here: LINK

- Fits Gen 2 Pmag 20 only (Straight body)

Pmag LR10 Magblock GEN M3 Magazine Capacity Limiters (5 Round for Hunting)

Fits the Magpul LR10 .308/7.62x51mm 10 round Pmags and will convert them to hold only 5 rounds for hunting. 

- Will NOT fit older version magazines. Gen M3 Only.

- Load magazines on a closed bolt in most rifles.

- Easy to install. New style block allows you to use the stock locking plate.

- No external magazine modifications.

Magblock 10 and 15 Round Limiter for Magpul 30 Round AK-47 Pmag (7.62x39mm)

This block fits the new Magpul 30 round AK47 magazines and will convert them to hold 10 rounds.

- Replaces the lower locking plate for an easy and secure install.
- Built in spring catch holds the limiter securely in place and prevents noise.
- Also available as a 5 round limiter for 20 round Pmags and a 15 round option is available.
- Patented design not available anywhere else. 

*Made using out new Universal AK Limiter. If using the universal AK kit to make this limiter, cut so #39 shows in the indicator notch and use the Pmag lock insert. The block sold here come pre-cut for this size. 

Upgrade Stainless Steel AK replacement springs available for Pmag AK Magazines! Add to order below for a discount.  See our upgrade springs here: LINK

Magblock 10/30 MCL (Magazine Capacity Limiter) for Magpul 30 round Pmags in 300 Blackout only.

- This block will replace the lower spring attachment point  or locking plate and convert a 30 round magazine to hold only 10 rounds.

- The Pmag dust covers will still fit when loaded.

- Magazines can be loaded with the bolt closed.- Does not affect reliability.

- No increase in spring pressure. 

Heckler & Koch G36 Magblock

- Works with Magpul Pmag Magazines for the HK G36 only.

- 10/30 configuration (10 rounds in a 30 round body)

- Replaces the original locking plate

- Simple quick install. 

10 Round Limiter for Gen M3 30 Round Pmags

Magblock 10/30 MCL (Magazine Capacity Limiter) for Magpul 30 round Gen M3 Pmags in .223/5.56mm. 

- This block will replace the lower spring attachment point  or locking plate and convert a 30 round magazine to hold only 10 rounds.

- The Pmag dust covers will still fit when loaded.

- Magazines can be loaded with the bolt closed.

- Does not affect reliability.

- No increase in spring pressure. 

- Compatable with new Magpul Gen 3 Pmags only.  These will not work in original Pmags. Can NOT be snapped down to fit 20 round Gen M3 Pmags. Please order pre-trimmed blocks for your 20 round Gen M3 Magazines.

Magblock 10/30 MCL (Magazine Capacity Limiter) for Magpul 30 round Pmags in .223/5.56mm.

- This block will replace the lower spring attachment point  or locking plate and convert a 30 round magazine to hold only 10 rounds.

- The Pmag dust covers will still fit when loaded.

- Magazines can be loaded with the bolt closed.

- Does not affect reliability.

- No increase in spring pressure. 

- Will also fit 30 round Emags. 

- Compatable with original Pmags and "M" Series only.  These will not work without modifications in Gen 3 or M3 Pmags. We will have another product set up to buy pre-trimmed M3 blocks. Here are instructions on how to trim blocks to work with Gen M3 Pmags:   http://www.calguns.net/calgunforum/showpost.php?p=9787410&postcount=261

Magblock 10 Round Limiter for Pmag 15 GL9 Magazines.

- Fits 15 round Magpul Pmag GL9 magazines for Glock 19.

- Easy installation at the base of the magazine and sits on top of the locking plate.
- Limits the magazine to 10 rounds of 9mm. 
- Held in place with spring tension or can be epoxied for a permanent modification. 
- Lightweight, efficient design. 

* Please click the photos for installation instructions. Fits Magpul Pmag 15 GL9 Magazines Only. Will not fit standard Glock type Magazines.

Universal Limiter Instructions: To make this limiter using the universal pistol limiter, cut the base flush with #8 showing in the indicator notch. Then cement base and slide in place. The bottom lock is not used. 

Note: This block will fit the New Shadow Systems MR920 15 round magazine.