Search results for 'uzi'
-
MagBlock Essentials First Aid Kit
MagBlock Essentials First Aid Kit
-This kit contains everything needed when you are having a bad day
-This kit has been designed to allow for quick access to your lifesaving gear when you need to most
-All items are sealed and come packed in a Quick Release Medical Pouch
-This kit would be a great addtiion to a range bag, battle belt, and/or a truck
$42.95 -
North American Rescue, M-FAK Mini First Aid Kit
North American Rescue, M-FAK Mini First Aid Kit
- NAR's most compact, versatile Mini First Aid Kit
- Super compact, rugged nylon platform that allows attachment both vertically (MOLLE backing) and horizontally (3 in. belt loop)
- Clam shell configuration utilizes (2) two main sleeves that open on both ends for easy access
- Multiple elastic loops for secure gear organization
- Vertical mount can be set to open left-to-right or right-to-left based on shooter preference
- Horizontal mount on a belt allows opening directly to your C-A-T.(R) tourniquet
- Treatment pack out option: BLS (Basic Life Support)
- Half the size of the popular T.O.R.K. platform
$82.95 -
North American Rescue, Individual Patrol Officer Medical Kit
North American Rescue, Individual Patrol Officer Kit (IPOK), Medical Kit
-
- 1 x pair Black Talon(R) Nitrile Trauma Gloves, lg.
- 1 x C-A-T(R) (Combat Application Tourniquet(R)) Black
- 1 x S-rolled Gauze (4.5 in. x 4.1 yd.)
- 1 x Flat ETD(TM) 4 in. Emergency Trauma Dressing
$46.95 -
-
North American Rescue, Individual Aid Medical Kit
North American Rescue, Individual Aid Kit, Medical Kit
- Compact first aid kit to treat penetrating and other traumatic injuries
- Designed for non-medically trained caregivers to control bleeding until medically trained responders arrive on scene
- Vacuum packaged & easy-to-open with the medical supplies needed to begin treatment
$15.95 -
North American Combat Application Tourniquet
North American Rescue, Combat Application Tourniquet Gen 7 Medical Tourniquet
- Single Routing Buckle for faster application, decreased blood loss, effective slack removal, fewer windlass turns
- Reinforced windlass rod with increased diameter for enhanced strength and aggressive ribbing for improved grip
- Bilateral windlass clip for rapid windlass lock and bilateral buttress for added strength
- Reinforced stabilization plate with beveled contact bar
- Signature red elliptical tip (Red Tip Technology(R)) provides visual cue during application
- Patented free-moving internal band for true evenly distributed circumferential pressure
$31.95 -
Masterpiece Arms MPA 10/32 Magblock 9mm (Tapco)
10 Round Limiter for 32 Round Tapco MPA Magazines
Magblock 10/32 Magazine Capacity Limiter for the Masterpiece Arms 32 round 9mm magazines made by Tapco.
- This block will replace the lower spring attachment point or locking plate and convert a 32 round magazine to hold only 10 rounds.
- Very easy to install
- Does not affect reliability.
- No increase in spring pressure.
- Slight modification of the follower is required to fit all 10 rounds. Please see the pictures posted here for instructions.
$6.95 As low as: $5.95 -
ProMag Cobray M-11 Magblock Limiter 10/32
This block will work with 32 round 9mm ProMag Cobray M-11 magazines to make a 10 round magazine. The spring can also be epoxied to the block which allows for dis-assembly and cleaning, or epoxy the floor plate closed for a more secure modification.
Block installs at the base and allows you to use the factory locking plate.
$6.95 As low as: $5.95 -
Cobray M-10 Zytel 10/32 Magblock (9mm)
This block will work with 32 round 9mm Cobray M-10 magazines to make a 10 round magazine. The spring can also be epoxied to the block which allows for dis-assembly and cleaning, or epoxy the floor plate closed for a more secure modification.
Block installs at the base.
$6.95 As low as: $5.95 -
Cobray M-11 Zytel 10/32 Magblock (9mm)
This block will work with 32 round 9mm Cobray M-11 magazines to make a 10 round magazine. The spring can also be epoxied to the block which allows for dis-assembly and cleaning, or epoxy the floor plate closed for a more secure modification.
Block installs at the base.
$6.95 As low as: $5.95 -
STEN 10/32 Magblock 10 Round Limiter
Magblock 10 Round Limiter for Sten 32 and 20 Round Magazines
- Fits Sten 32 round magazines and 32 round magazines that have been "Brass Wire" limited to 20 rounds. You must choose an option below.
- Easy installation at the base of the spring.- Limits the magazine to 10 rounds of 9 mm.
- Held in place with spring tension or can be epoxied for a permanent modification.
- Lightweight, efficient design. - Made of a super strong, heat resistant, fiber reinforced polymer. - Please Note: The Photos show a 32 round magazine that has 2 brass wires on the inside that protrude outside near the bottom of the magazine. This is a Sten 32 round magazines that was limited to a single stack 20 round magazine. This was a common military modification that helped with reliability and very widespread on surplus magazines. Please select the "Single Stack Modified" option below if you see these brass wires at the bottom of your magazine to ensure you receive the proper limiter. Thank you.$6.95 As low as: $5.95 -
Thompson .45 10/20 Round Limiter Magblock
This block fits 20 Round Thompson .45 magazines to limit them to 10 rounds.
The spring can also be epoxied to the block for a permanent installation. A spring catch at the bottom makes installation quick and easy.
$6.95 As low as: $5.95 -
Thompson .45 Magblock 10/30 Round Limiter
This block fits 30 Round Thompson .45 magazines to limit them to 10 rounds.The spring can also be epoxied to the block for a permanent installation. A spring catch at the bottom makes installation quick and easy.
$6.95 As low as: $5.95 -
TEC-9 10/32 Magblock 9mm
10 Round Limiter for 32 Round TEC-9 Magazines
Magblock 10/32 Magazine Capacity Limiter for the TEC-9 32 round 9mm magazines pictured here.
- This block sits on top of the locking plate to convert a 32 round magazine to hold only 10 rounds.
- Very easy to install
- Does not affect reliability.
- No increase in spring pressure.
- Block is marked "STEN" with "2X" at the end.
$6.95 As low as: $5.95 -
Colt, UZI and MetalForm 10/32 Magblock
This block will work with 32 round 9mm Colt, UZI and Metalform magazines to make a 10 round magazine. It replaces the lower floor plate. The spring can also be epoxied to the block which allows for dis-assembly and cleaning, or epoxy the floor plate closed for a more secure modification.$7.49 As low as: $6.49 -
Walther UZI Magblock (.22LR)
Walther UZI (.22LR) Magblock 10 Round Limiter
- Fits 20 round Walther UZI .22 magazines.
- Easy installation by replacing the locking plate. See photos.
- Limits the magazine to 10 rounds of .22
- Held in place with spring tension or can be epoxied for a permanent modification.
- Lightweight, efficient design.$6.59 As low as: $5.95