Search results for 'sti'

MagBlock Essentials First Aid Kit 

-This kit contains everything needed when you are having a bad day

-This kit has been designed to allow for quick access to your lifesaving gear when you need to most

 -All items are sealed and come packed in a Quick Release Medical Pouch

-This kit would be a great addtiion to a range bag, battle belt, and/or a truck

-North American Rescue items come packed and sealed and come from NAR

-North American Rescue Cat Gen 7 Tourniquet is factory and not a knock-off

Magblock Universal Pistol Limiter 3 Pack Kit
Allows for an easy custom solution for most standard pistol magazines. Requires cutting of the Magblock for a custom fit. As shipped it will limit most magazines to much less than 10 rounds.

Save time and money by making your magazines legal. 

NOTE: These are recommended for gunsmiths and hobbyists who don't mind experimenting with the length to get the fit they want. We do offer these as an option for some magazines already precut.  Now you have an option if we do not have a limiter available for your specific magazine with the recent law changes. If they don't work out for you just send them back for a refund or exchange.

- This Magblock fits most magazines from .380, 9mm, .40, 10mm and .45 magazines.

- Comes with one universal base, an adjustable slide, and a bottom lock plate which is optional to use. Highly recommend using optional Magblock Cement below.

- Easily installs at the base of the spring. It is held in place with spring tension alone or can be epoxied if desired.

- Patented adjustment mechanism and end profile that prevents the limiter from sliding off the follower.

- No modification to the magazine is required.

- Lightweight and will not interfere with magazine reliability.

- Requires cutting of the Magblock for a custom fit. As shipped it will limit most magazines to much less than 10 rounds. 

Refrence page. Lengths for tested magazines: http://www.magazineblocks.com/universal

Magblock Universal Pistol Limiter kit allows for an easy custom solution for most standard pistol magazines. Requires cutting of the Magblock for a custom fit. As shipped it will limit most magazines to much less than 10 rounds.

Save time and money by making your magazines legal. 

NOTE: These are recommended for gunsmiths and hobbyists who don't mind experimenting with the length to get the fit they want. We do offer these as an option for some magazines already precut.  Now you have an option if we do not have a limiter available for your specific magazine with the recent law changes. If they don't work out for you just send them back for a refund or exchange.

- This Magblock fits most magazines from .380, 9mm, .40, 10mm and .45 magazines.

- Comes with one universal base, an adjustable slide, and a bottom lock plate which is optional to use. Highly recommend using optional Magblock Cement below.

- Easily installs at the base of the spring. It is held in place with spring tension alone or can be epoxied if desired.

- Patented adjustment mechanism and end profile that prevents the limiter from sliding off the follower.

- No modification to the magazine is required.

- Lightweight and will not interfere with magazine reliability.

- Requires cutting of the Magblock for a custom fit. As shipped it will limit most magazines to much less than 10 rounds. 

Refrence page. Lengths for tested magazines: http://www.magazineblocks.com/universal

Magblock 10 Round Limiter for Bul Armory SASII 2011 170mm 28 Round 9mm Magazines

- Fits 28 round 9mm Factory Bul Armory SAS2 170 mm magazines. 
- Easy installation at the base of the magazine. (See pictures for details)
- Limits the magazine to 10 rounds of 9mm. 
- Held in place with spring tension or can be epoxied for a permanent modification. 
- Lightweight, efficient design. 
- Only fits the floor plates shown. May need sanding shorter if your magazines have a floorplate locking plate.

Arsenal Strike One Magblock 10 & 15 Round Limiters for 17 Round Magazine

- Fits 17 round 9mm Arsenal Strike One magazines as shown.
- Tested in Arsenal Strike One 17 round magazine.
- Easy installation at the base of the spring as shown.
- Limits the magazine to 10 rounds of 9mm
- Held in place with spring tension or can be epoxied for a permanent modification.
- Lightweight, efficient design.

Universal Limiter Instructions:  To make this limiter out of the Universal  just cut flush at the base with number "14" shown in the indicator notch. Cement together after testing fit. 

Magblock 10 Round Limiter for MBX Extreme 155mm 26 Round 9mm Magazines

- Fits 26 round 9mm Factory MBX Extreme Bul Armory 155 mm magazines with COMPETITION FOLLOWER . 
- Easy installation into the base of the magazine.
- Limits the magazine to 10 rounds of 9MM. 
- Held in place with spring tension or can be epoxied for a permanent modification. 
- Lightweight, efficient design. 
- Only fits the floor plates shown. May need sanding shorter if your magazines have a floorplate locking plate.

Magblock 10 Round Limiter for Atlas Gunworks Slidelock 126mm 18 Round 9mm Magazines

- Fits 18 round 9mm Factory Atlas Gunworks 126 mm magazines. 
- Easy installation into the follower of the magazine.
- Limits the magazine to 10 rounds of 9mm. 
- Held in place with spring tension or can be epoxied for a permanent modification. 
- Lightweight, efficient design. 
- Only fits the Slidelock (lock-back) follower style magazines. See pictures below of a Slidelock follower.

Magblock 10 Round Limiter for Atlas Gunworks Slidelock 140mm 21 Round 9mm Magazines

- Fits 21 round 9mm Factory Atlas Gunworks 140mm magazines. 
- Easy installation into the follower of the magazine.
- Limits the magazine to 10 rounds of 9mm. 
- Held in place with spring tension or can be epoxied for a permanent modification. 
- Lightweight, efficient design. 
- Only fits the Slidelock (lock-back) follower style magazines. See pictures below of a Slidelock follower.

Magblock 10 Round Limiter for Atlas Gunworks Slidelock 120mm 16 Round 9mm Magazines

- Fits 18 round 9mm Factory Atlas Gunworks 120 mm magazines. 
- Easy installation into the follower of the magazine.
- Limits the magazine to 10 rounds of 9mm. 
- Held in place with spring tension or can be epoxied for a permanent modification. 
- Lightweight, efficient design. 
- Only fits the Slidelock (lock-back) follower style magazines. See pictures below of a Slidelock follower.

Magblock 10 Round Limiter for MBX Extreme 126mm 15 Round .45 Magazines

- Fits 15 round .45 Factory MBX Extreme Staccato STI 126 mm magazines. 
- Easy installation into the base of the magazine.
- Limits the magazine to 10 rounds of .45acp. 
- Held in place with spring tension or can be epoxied for a permanent modification. 
- Lightweight, efficient design. 
- Only fits the floor plates shown. May need sanding shorter if your magazines have a floorplate locking plate.

Magblock 10 Round Limiter for Para Ordnance P14 .45 magazines

- Fits 14 round .45 Para Ordnance P14 magazines. 
- Easy installation at the base of the spring.
- Limits the magazine to 10 rounds of .45. 
- Held in place with spring tension or can be epoxied for a permanent modification. 
- Lightweight, efficient design. 
- Made of a super strong, heat resistant, fiber reinforced polymer.

*** Tested on factory Para Ordnance P14 .45 magazines which use a locking plate at the base. The block may need to be modified to work with magazines from other manufactures or sizes. If your magazines do not have a plastic locking plate that sits on top ot the floor plater then they will not work. 

WILL NOT WORK WITH PRO-MAG PARA14 MAGAZINES

Magblock 10 Round Limiter for Checkmate 126mm 17 Round 9mm Magazines

- Fits 17 round 9mm Factory Checkmate 2011 126 mm magazines. 
- Easy installation into the follower of the magazine.
- Limits the magazine to 10 rounds of 9mm. 
- Held in place with spring tension or can be epoxied for a permanent modification. 
- Lightweight, efficient design. 
- Only fits the floor plates shown. May need sanding shorter if your magazines have a floorplate locking plate.

*Note: This block will work in Staccato 126mm-17rd G3 magazines.

Magblock 10 Round Limiter for STI 140mm 20 Round 9mm Magazines

- Fits 20 round 9mm Factory STI 140 mm magazines. 
- Easy installation into base of the magazine.
- Limits the magazine to 10 rounds of 9mm. 
- Held in place with spring tension or can be epoxied for a permanent modification. 
- Lightweight, efficient design. 
- Only fits the floor plates shown. May need sanding shorter if your magazines have a floorplate locking plate.

*Note: If you have a newer Staccato STI magazine that has G3 on the back of the magazine, then you will need to click G3 option below.

Magblock 10 Round Limiter for STI 140mm 20 Round 9mm Magazines

- Fits 26 round 9mm Factory STI 170 mm magazines. 
- Easy installation at the base of the spring.
- Limits the magazine to 10 rounds of 9mm. 
- Held in place with spring tension or can be epoxied for a permanent modification. 
- Lightweight, efficient design. 
- Only fits the floor plates shown. May need sanding shorter if your magazines have a floorplate locking plate.