Search results for 'black dog'
-
Promag HK33 C93 10/20 Block
HK33 and C93
- This block will convert 20 round Promag HK magazines into a 10 round magazine.
- Works with Promag .223/5.56mm magazines.
- Replaces factory locking plate
$5.75 As low as: $4.95 -
Mini 14 MCL 10/20 Block (Promag)
Mini 14 Magblock 10/20 MCL (Magazine Capacity Limiter)
This block is for use in PROMAG 20 round Mini 14 magazines. These blocks will attach to the lower spring and convert a 20 round magazine to hold only 10 rounds.
- Only for use in PROMAG magazines at this time.
- The bottom of the follower may need slight trimming to load on a closed bolt with 10 rounds loaded in the magazine. See the photos for details.
- This is a modified USGI magblock.
$6.75 As low as: $5.75 -
Mini 14 MCL 10/30 Block (Promag)
Mini 14 Magblock 10/30 MCL (Magazine Capacity Limiter)
This block is for use in PROMAG 30 round Mini 14 magazines. These blocks will attach to the lower spring and convert a 30 round magazine to hold only 10 rounds.
-Only for use in PROMAG magazines at this time.
-Slight modification to the bottom of the follower may be needed for a perfect fit. See the photos for details.
-This is a modified USGI Magblock.
$6.75 As low as: $5.75 -
H&K33 C93 10/40 Block
HK33 and C93
- This block will convert 40 round HK magazines into a 10 round magazine.
- Works with H&K .223/5.56mm magazines.
- Includes small insert for the locking plate. This gives the block a flat surface to make contact with.
$6.49 -
6.8mm 10/25 Block
Converts C-Products 6.8mm 25 round magazines to 10 rounds.
Magblock 10/25 MCL block for use in C-Products, ASC, and other 6.8 mm 25 round magazines. This block will convert a 25 round magazine to hold only 10 rounds of 6.8mm. May fit other 25 round 6.8 mm magazines also
NOTE: This it a cut down USGI Magblock, so the top was milled off. Works perfectly.
$6.25 As low as: $4.95 -
Galil /Golani 10/30 Block for Tapco
10 Round Limiter for Tapco Galil and Golani rifle Magazines
- This block fits the Tapco 30 round .223/5.56mm magazines for Galil and Golani rifles and convert them to hold only 10 rounds.
- This block replaces the original Tapco locking plate.
- No modification to the original magazine or follower is required.
- Fits Tapco .223/5.56 Galil/Golani magazines only.
$6.95 -
Galil /Golani 10/35 Block
Galil and Golani 10 Round Limiter
This block fits the steel 35 round magazines for Galil and Golani rifles and convert them to hold only 10 rounds.
New design ncludes a lower magazine spring attachment point to make installation easier. This makes a convenient epoxy location.
*(FYI some blocks may be marked 10/30. These are really 10/35 limiters)
$6.95 As low as: $5.95 -
Universal AK 10/30 Block (ABS Plastic)
Universal AK47 10/30 Magblock
*** See our NEW Universal AK Limiter Here: CLICK HERE for the IMPROVED UNIVERSAL AK KIT***
Fits most steel 30 round AK47 magazines and will convert them to hold only 10 rounds. Works best in magazines with flat locking plates like in the first photo. These tend to be Romanian, Russian, and Chinese magazines. Other plates may need to be modified to work correctly demonstrated in the second photo. This is encountered with some Bulgarian manufactured magazines.
- Features a spring catch which will allow an easy attachment point to the spring. This prevents the block making noise and epoxy can be added at this point to make it permanent.
NOTE: These are made of additive manufacturing using high temperature ABS plastic. They're very durable and will last the life of the magazine.
- If you are interested in identification of your AK magazines here is an excellent resource: AK47 Mag Identification
$7.49 As low as: $6.25 -
Colt USGI 10/20 block
Colt USGI 10/20 MCL Magblock
For use in ONLY Colt 20 round magazines. (See USGI 10/20 for other types of USGI magazines.)
-This block will attach to the bottom of the spring and convert 20 round magazines to hold only 10 rounds.
-COLT USGI magazines use a modified 10/20 USGI block which has been trimmed and an adapter plate plastic welded on.
-Requires no magazine modifications.
$6.95 As low as: $5.95 -
AK 10/20 Block for Tapco
Tapco AK47 10/20 Magblock
This block fits the Tapco 20 round AK47 magazines and will convert them to a 10 round magazine.
-Replaces the lower locking plate.
-Works on Tapco 7.62x39mm 20 Round AK magazines.
$7.49 As low as: $5.95 -
FAL 10/20 Block
Converts FAL 20 round magazines to 10 rounds.
This block will fit surplus military FAL 20 round magazines and convert them to 10 rounds.
The end of the magazine spring will snap into the hole in the block to hold it in place.$6.50 As low as: $5.95 -
Sale
10 Block Bulk Pack
10 Block Bulk Pack
- 10 block bulk pack. Includes ONLY the following: Pmag M2/MOE 10/30, Pmag M2/MOE 10/20, USGI 10/30, and USGI 10/20, HK G36, XD/XDm 9 and .40 Pistol blocks, and Glock 9 and .40 Pistol blocks, excluding the Glock 10/33.
- You MUST specify the quantity and type of each block below. Please be specific.
Excludes 10/20 Colt blocks and Gen 3 blocks
Regular Price: $45.00
Special Price $39.95
-
CMMG USGI AR-15 Magblock 10/25 (.22LR)
CMMG USGI AR-15 .22LR 10/25 Magblock 10 Round Limiter
- This block will convert 25 round CMMG USGI AR-15 .22LR magazines into a 10 round magazine.
- Easy to install without damage to your magazines. Allows use of factory locking plate and base plate.
-This block is for CMMG .22LR USGI magazines in the pictures only. Will not work in Clear CMMG .22LR magazines.
$6.59 As low as: $5.95 -
Beretta M9A3 Magblock 10/17 (9mm)
Beretta M9A3 Magblock 10/17 (9mm) 10 Round Limiter
This Magblock fits the factory Beretta M9A3 17 round 9mm magazines and will limit them to 10 rounds. Easily installed in seconds at the base of the spring. The factory locking plate is installed under the block. It is held in place with spring tension alone or can be glued or epoxied if desired.
- Simple install to make 10/17 Beretta M9A3 magazines.
- No modification to the magazine is required.
- Lightweight and will not interfere with magazine reliability.
- Works on original factory Beretta M9A3 magazines as seen in the photos. Other types of magazines will likely require modification of the limiter.*Please click on photos for installation instructions.
*Universal Limiter Instructions: Cut to #18 and glue flush at the bottom for 10/17 limiter. Slide lock is not used. When epoxy cures assemble magazine. The two parts of the universal limiter must be glued flush to prevent the locking plate from causing the limiter to shift sideways. #18 will show in the limiter window notch like in the photos.
$6.59 As low as: $5.95 -
Magpul Ranger Plate 223
The Magpul PMAG Ranger Plate is a floorplate replacement for the 5.56x45 PMAG and EMAG.
The ranger plate incorporates an integral loop similar to the original Magpul USGI Ranger.
When installed on the base of a magazine, the PMAG Ranger Plate provides unsurpassed speed and controllability during high stress, tactical magazine changes.
Made in U.S.A.
$5.95