Search results for 'Pmag MCL 10%2F30 Block'
-
PMAG 10 GL9 Glock 19 Magblock 5/10 (9mm)
Magblock 5 Round Limiter for Pmag 10 GL9 Magazines.
- Fits 10 round Magpul Pmag GL9 magazines for Glock 19.
- Easy installation at the base of the magazine and sits on top of the locking plate.
- Limits the magazine to 5 rounds of 9mm.
- Held in place with spring tension or can be epoxied for a permanent modification.
- Lightweight, efficient design.* Please click the photos for installation instructions. Fits Magpul Pmag 10 GL9 Magazines Only. Will not fit standard Glock type Magazines.
Universal Limiter Instructions: To make this limiter using the universal pistol limiter, cut the base flush with #6 showing in the indicator notch.$6.59 As low as: $5.95 -
Pmag LR 20 Magblock 10/20 (.308) Gen 2
Pmag LR20 Magblock 10/20 GEN 2
Fits the Magpul LR20 .308/7.62x51mm Pmags (All older versions) and will convert them to hold only 10 rounds. Easy to install. You will not use the original factory locking plate with this block.
- Will NOT fit new Gen M3 Version. Fits all prior versions.
- Dust covers still fit with 10 rounds loaded.
- Load magazines on a closed bolt.
- Easy to install.
- Includes required screw.
- No external magazine modifications.
$6.50 As low as: $4.50 -
Pmag LR 20 Magblock 10/20 Gen M3 (.308)
Pmag LR20 Magblock GEN M3 Magazine Capacity Limiters (5, 10, and 15 Round Limiters Available)
Fits the Magpul LR20 .308/7.62x51mm Pmags and will convert them to hold only 5, 10, or 15 rounds. Select desired size below. Easy to install.
- Will NOT fit older version magazines. Gen M3 Only.
- Dust covers still fit with 10 rounds loaded.
- Load magazines on a closed bolt in most rifles.
- Easy to install.
- No external magazine modifications.
-This block requires you use the factory Magpul locking plate with our block (See picture 1 and 2).
$6.50 As low as: $5.95 -
PMAG 12 GL9 Glock Magblock 10/12 (9mm)
Magblock 10 Round Limiter for Pmag 12 GL9 Magazines.
- Fits 12 round Magpul Pmag GL9 magazines for Glock 26.
- Easy installation at the base of the magazine and sits on top of the locking plate.
- Limits the magazine to 10 rounds of 9mm.
- Held in place with spring tension or can be epoxied for a permanent modification.
- Lightweight, efficient design.* Please click the photos for installation instructions. Fits Magpul Pmag 12 GL9 Magazines Only. Will not fit standard Glock type Magazines.
$6.59 As low as: $5.95 -
Magpul D60 10/60 Magblock (5.56)
Magblock 10/60 MCL (Magazine Capacity Limiter) for Magpul 60 round D60 Drum in .223/5.56mm.
- Magazines can be loaded with the bolt closed.
- Does not affect reliability.
- No increase in spring pressure.
- Easy to install. See the video for instructions.$14.95 -
Magpul D50 10/50 Magblock (7.62x51)
Magblock 10/50 MCL (Magazine Capacity Limiter) for Magpul 50 round D50 Drum in 7.62x51.
- Magazines can be loaded with the bolt closed.
- Does not affect reliability.
- No increase in spring pressure.
- Easy to install. See the video for instructions.$14.95 -
Magpul PMag CZ Scorpion Evo Magblock 10/35 (9mm)
Magblock 10 Round Limiter for Magpul PMag CZ Scorpion Evo (9mm) 35 Round Magazines
- Fits 35 round 9mm Magpul PMag35 CZ Scorpion Evo magazines
- Easy installation at the base of the spring on top of the original locking plate so you wont loose your original.
- Limits the magazine to 10 rounds of 9mm.
- Lightweight, efficient design.
- Made of a strong, heat resistant, polymer.$6.95 As low as: $5.95 -
Sale
GEN M3 Pmag MCL 15/30 Block (15 Round Limiter)
15 Round Limiter for Gen M3 30 Round Pmags
Magblock 15/30 MCL (Magazine Capacity Limiter) for Magpul 30 round Gen M3 Pmags in .223/5.56mm.
- This block will replace the lower spring attachment point or locking plate and convert a 30 round magazine to hold only 15 rounds.
- The Pmag dust covers will still fit when loaded.
- Magazines can be loaded with the bolt closed on many rifles.
- Does not affect reliability.
- No increase in spring pressure.
- Compatable with new Magpul Gen 3 Pmags only. These will not work in original Pmags.
-
OKAY Surefeed USGI 10/20 MagBlock (5.56)
Magblock 10/20 and 15/20 Okay Surefeed USGI MCL (Magazine Capacity Limiter)
- For use in Surefeed Okay Industries 20 round magazines.
- These blocks will convert a 20 round magazine to hold only 10 rounds.-Note: This block is designed for the OKAY Industries Surefeed 20 round magazine only. It will not work in other USGI 20 round magazines without modification.
$6.95 As low as: $5.95 -
USGI AR-15 Magblock 10/20 (5.56)
Magblock 10/20 USGI MCL (Magazine Capacity Limiter)
Magblock 10/20 MCL (Magazine Capacity Limiter) for use in most USGI 20 round magazines in .223/5.56mm.
-Will convert a 20 round magazine to hold only 10 rounds.
-Magazines can be loaded with the bolt closed.
You must specify the type or brand of magazine when ordering. for example Colt 20 round magazines use a modified block, but are straight 20 magazine bodies. Magazines with a slightly curved body (such as some C-Products) use different block and must be specified when ordering.- See our FAQ section for details about using with Magpul Ranger Plates. http://www.magazineblocks.com/magento/faq or select the custom option below to buy with the bottom locking tab still in place.
$6.50 As low as: $5.49 -
Ruger Mini 14 Magblock 10/20
Mini 14 Magblock 10/20 MCL (Magazine Capacity Limiter for Ruger Magazines
This block is for use in RUGER 20 round Mini 14 magazines. These blocks will attach to the lower spring and convert a 20 round magazine to hold only 10 or 15 rounds. (Select option below).
- Only for use in RUGER manufactured magazines.
- This is a modified USGI magblock.
$6.95 As low as: $5.95 -
USGI AR15 Magblock 10/30 (5.56)
Magblock 10/30 USGI MCL (Magazine Capacity Limiter) for AR15/M16 Magazines
- For use in USGI type 30 round magazines for the AR15/M16.
- Will also fit SCAR 16 GI Magazines.
- These blocks will convert a 30 round magazine to hold only 10 rounds.
- Works great Magpul anti-tilt followers.
- Fits Brownells, C-Products, ACS, D&H, NHMTG, Colt, and most other metal .223/5.56 mm 30 round magazines.-Original military style green USGI followers may need to be trimmed or replaced to work properly. If your followers have a green spike in the middle this will have to be cut down to work properly. Please see the training video section or the other photo here for instructions on how to do this. The link to the FAQ section also provides more information.
- See our FAQ section for details about using with Magpul Ranger Plates and L-Plates. http://www.magazineblocks.com/magento/faq
We have found two different methods that can be used for USGI Ranger Plates and L-Plates. We have added custom options below to buy with the bottom locking tab still in place (Method #1), or converted for use with both parts of the Ranger/L-plate as Magpul intended. You can also convert them yourself using the pictures in the FAQ section as a guide.$6.50 As low as: $4.95 -
Mini 14 MCL 10/30 Block (Tapco)
Mini 14 Magblock 10/30 MCL - Magazine Capacity Limiter for Tapco 30 Round .223/5.56mm Magazines)
- Fits new Tapco 30 round magazines for the Ruger Mini 14.
- These blocks will attach to the bottom of the spring.
- Converts a 30 round magazine to hold only 10 rounds.
*Only for use in TAPCO Mini 14 magazines.$6.95 As low as: $5.95 -
Mini 14 MCL 10/20 Block (Promag)
Mini 14 Magblock 10/20 MCL (Magazine Capacity Limiter)
This block is for use in PROMAG 20 round Mini 14 magazines. These blocks will attach to the lower spring and convert a 20 round magazine to hold only 10 rounds.
- Only for use in PROMAG magazines at this time.
- The bottom of the follower may need slight trimming to load on a closed bolt with 10 rounds loaded in the magazine. See the photos for details.
- This is a modified USGI magblock.
$6.75 As low as: $5.75 -
Mini 14 MCL 10/30 Block (Promag)
Mini 14 Magblock 10/30 MCL (Magazine Capacity Limiter)
This block is for use in PROMAG 30 round Mini 14 magazines. These blocks will attach to the lower spring and convert a 30 round magazine to hold only 10 rounds.
-Only for use in PROMAG magazines at this time.
-Slight modification to the bottom of the follower may be needed for a perfect fit. See the photos for details.
-This is a modified USGI Magblock.
$6.75 As low as: $5.75