CMMG MK4 - AR-15 .22LR 10/25 Magblock 10 Round Limiter

- This block will convert 25 round CMMG MK4/AR-15 .22LR magazines into a 10 round magazine.

- Easy to install without damage to your magazines. Allows use of factory locking plate and base plate.

 -This block is for CMMG Mk4 (See photos) .22LR magazines in the pictures only. Will not work in Clear CMMG or USGI style .22LR magazines. 

Pmag LR20 Magblock 10/20 GEN 2

Fits the Magpul LR20 .308/7.62x51mm Pmags (All older versions) and will convert them to hold only 10 rounds. Easy to install. You will not use the original factory locking plate with this block.

- Will NOT fit new Gen M3 Version. Fits all prior versions.

 - Dust covers still fit with 10 rounds loaded.

 - Load magazines on a closed bolt.

 - Easy to install. 

 - Includes required screw. 

- No external magazine modifications. 

Magblock 10 Round Limiter for Sig Gen 2 MPX 9mm 20 Round Magazines

- Fits 20 round 9mm Sig MPX factory magazines.
- Limits the magazine to 10 rounds of 9mm
- Held in place with spring tension or can be epoxied for a permanent modification. 
- Lightweight, efficient design. 
- Made of a super strong, heat resistant, fiber reinforced polymer.

-This block will ONLY work in the new Sig MPX 20-round magazine pictured below.
 

Glock 25 (.380) Magblock

- Fits 15 round .380 auto caliber Glock 25.  

- Easy installation under the magazine follower.
- Limits the magazine to 10 rounds of .380 auto caliber ammunition. 
- Held in place with spring tension or can be epoxied for a permanent modification. 
- Lightweight, efficient design. 

-This block has only been tested on factory Glock magazines, and will not work in aftermarket magaziens without modifcation. 

Genuine Factory Beretta 92FS Magblock 10/18 (9mm) 10 & 15 Round Limiter

This Magblock fits the factory Beretta 92FS Series 18 round 9mm magazines and will limit them to 10 rounds.  Easily installed in seconds at the base of the spring. The factory locking plate is installed under the block. It is held in place with spring tension alone or can be glued or epoxied if desired.

- Simple install to make 10/18 Beretta 92 Series magazines.
- No modification to the magazine is required.
- Lightweight and will not interfere with magazine reliability.
- Works on original factory Beretta 90-two magazines as seen in the photos. Other types of magazines will likely require modification of the limiter. 

-Will not work on older Beretta 92FS 18 round magazines. Will only work on Beretta magazines pictured below.

*Please click on photos for installation instructions. 

*Universal Limiter Instructions: Cut to #18 and glue flush at the bottom for 10/18 limiter. Slide lock is not used. When epoxy cures assemble magazine. The two parts of the universal limiter must be glued flush to prevent the locking plate from causing the limiter to shift sideways. #18 will show in the limiter window notch like in the photos. 

 Attention: Make sure to verify what magazine you have before ordering.This block will fit the following 18-round 92FS series magazines:

Beretta 90-two, Beretta 92G, Beretta M9, Beretta 92D, Beretta 92 Vertec, Beretta 92F

Universal AK47 10/30 Magblock

*** See our NEW Universal AK Limiter Here: CLICK HERE for the  IMPROVED UNIVERSAL AK KIT***

Fits most steel 30 round AK47 magazines and will convert them to hold only 10 rounds. Works best in magazines with flat locking plates like in the first photo. These tend to be Romanian, Russian, and Chinese magazines. Other plates may need to be modified to work correctly demonstrated in the second photo. This is encountered with some Bulgarian manufactured magazines. 

- Features a spring catch which will allow an easy attachment point to the spring. This prevents the block making noise and epoxy can be added at this point to make it permanent.

NOTE: These are made of additive manufacturing using high temperature ABS plastic. They're very durable and will last the life of the magazine. 

- If you are interested in identification of your AK magazines here is an excellent resource: AK47 Mag Identification

15 Round Limiter for Gen M3 30 Round Pmags

Magblock 15/30 MCL (Magazine Capacity Limiter) for Magpul 30 round Gen M3 Pmags in .223/5.56mm. 

- This block will replace the lower spring attachment point  or locking plate and convert a 30 round magazine to hold only 15 rounds.

- The Pmag dust covers will still fit when loaded.

- Magazines can be loaded with the bolt closed on many rifles.

- Does not affect reliability.

- No increase in spring pressure. 

- Compatable with new Magpul Gen 3 Pmags only.  These will not work in original Pmags.

Beretta M9-22, 92FS-22, M9A1-22 (.22LR) Magblock 10 Round Limiter New Improved Fit

- Fits 15 round .22 Beretta 92-22 magazines. 
- Easy installation by replacing the locking plate. See photos.
- Limits the magazine to 10 rounds of .22 
- Held in place with spring tension or can be epoxied for a permanent modification. 
- Lightweight, efficient design. 

*Please click on photos for installation instructions. 

Ruger Five-Seven Magblock 10 Round Limiter

- Fits 20 round 5.7 mm Factory Ruger magazines. 
- Easy installation at the base of the spring.
- Limits the magazine to 10 rounds of 5.7 mm. 
- Held in place with spring tension or can be epoxied for a permanent modification. 
- Lightweight, efficient design.

-The 10-round limiter is marked Ruger 57-15 Round

Magblock 10 and 15 Round Limiter for Magpul 30 Round AK-47 Pmag (7.62x39mm)

This block fits the new Magpul 30 round AK47 magazines and will convert them to hold 10 rounds.

- Replaces the lower locking plate for an easy and secure install.
- Built in spring catch holds the limiter securely in place and prevents noise.
- Also available as a 5 round limiter for 20 round Pmags and a 15 round option is available.
- Patented design not available anywhere else. 

*Made using out new Universal AK Limiter. If using the universal AK kit to make this limiter, cut so #39 shows in the indicator notch and use the Pmag lock insert. The block sold here come pre-cut for this size. 

Upgrade Stainless Steel AK replacement springs available for Pmag AK Magazines! Add to order below for a discount.  See our upgrade springs here: LINK

Magblock 10/32 MCL (Magazine Capacity Limiter) for Daniel Defense 32 round magazines in .223/5.56mm.

- Magazines can be loaded with the bolt closed.

- Does not affect reliability.

- No increase in spring pressure. 

Magblock 5 Round Limiter for Magpul 30 Round AK-47 Pmag (7.62x39mm)

This block fits the new Magpul 30 round AK47 magazines and will convert them to hold 5 rounds for Hunting.

- Replaces the lower locking plate for an easy and secure install.
- Built in spring catch holds the limiter securely in place and prevents noise.
- Patented design not available anywhere else. 

*Made using out new Universal AK Limiter. If using the universal AK kit to make this limiter, cut so #39 shows in the indicator notch and use the Pmag lock insert. Along with an adapter. 

Magblock 10 Round Limiter for Sig MPX 9mm 35 Round Magazines

- Fits 35 round 9mm Sig MPX factory magazines.
- Easy installation by inserting the block at the base. This block replaces the factory locking plate.
- Limits the magazine to 10 rounds of 9mm
- Held in place with spring tension or can be epoxied for a permanent modification. 
- Lightweight, efficient design. 

 

10 Round Limiter for Mod2 30 Round Amend2 Magazines

Magblock 10/30 MCL (Magazine Capacity Limiter) for Amend2 30 round in .223/5.56mm. 

- This block will replace the lower spring attachment point  or locking plate and convert a 30 round magazine to hold only 10 rounds.

- Does not affect reliability.

- No increase in spring pressure. 

 -A custom made adaptor allowes for use of the stock floor plate.